Sandblasting cabinet feed issues resolved

My solution to the feeding issue with our blast cabinet. I’m running 125psi 100cfm to the cabinet regulator that is set @95psi, this additional 3/8x1/4” id plastic line is being regulated @18psi. I started out taping this line about 1.25” beyond the end of my pickup or feed line & again at about 7/8” eventually ending at 1/2” past the end. This is where I worked best for me at 18psi. Simple fix that is relatively cheap. Hopefully this is helpful to someone that is as aggravated as I was.

[@BuddyBurks]

Thanks man

[@cruzadame-bn5mn]

Thanks 🙏

[@elroy8752]

Great