It's nice video but still I see much steel bar on the slab ,this technology help's to reduced steel,cement & weight of the building. Or you have reasons for that .Thanks
Very very very good this is video! Friend's, Can you explain to me how I can calibrate the jack and pump together to make sure that the pressure adopted in the pump is providing the force in the jack? My jack is mono-stressing jack.
Hi, It is always the best to have a clean and clear strand surface. However, that's not always the case. Surface corrosion with no pitting still can be used. Once stressed, grouting will be conducted. =)
Hi, It is an old jack. I do agree with you that the steps are time-consuming. How do you shorten the stressing work. You can share with us by dropping us an email. Thank you 😊
![Post-Tensioned Bonded System! [Site Inspection] #pt #posttension #engineer #structure #inspection](http://i.ytimg.com/vi/RacJTDSIuC0/mqdefault.jpg)
![Post-Tensioned Bonded System! [Site Inspection] #pt #posttension #engineer #structure #inspection](/img/tr.png)
![How To Read & Check Stressing Record? [Elongation] #PT #Posttension #engineer #stressing #record](http://i.ytimg.com/vi/mRaa-O7BEx0/mqdefault.jpg)
Best video., thanks 😊
I'm glad you liked it!. This content was contributed by a prestressing engineer in Malaysia
I never get tired of whatching this video. Definitely very good content presented. You are to be congratulated!
Thank you 😂
❤
Thanks
Welcome
It's nice video but still I see much steel bar on the slab ,this technology help's to reduced steel,cement & weight of the building. Or you have reasons for that .Thanks
😊 hello there. The slab reinforcement that you see is pure conventional rc (no tendon inside)❤
Very very very good this is video! Friend's, Can you explain to me how I can calibrate the jack and pump together to make sure that the pressure adopted in the pump is providing the force in the jack? My jack is mono-stressing jack.
Thank you. I have replied your email. Cheers
Sungguh cara yang sangat bagus., terimakasih teman anda telah berhasil melakukan pekerjaan ini.👍🙏🇮🇩
Post tensioned rusty wires are an instant red flag. Having seen post tensioned wires before, they are meant to be completely clear of rust.
Hi, It is always the best to have a clean and clear strand surface. However, that's not always the case. Surface corrosion with no pitting still can be used. Once stressed, grouting will be conducted. =)
kabel 15.6mm ke pakai bos
15.24mm
why are your tendons full of rust
Light rust is still acceptable as long as no pitting on the strand surface.
How old is your jack? So slow. So many unnecessary movements.
Hi, It is an old jack. I do agree with you that the steps are time-consuming. How do you shorten the stressing work. You can share with us by dropping us an email. Thank you 😊