How To Make LED Chaser / Motion Blinker/ Flasher Without IC (English Subtitle)

Equipment / Component :
1. Transistor - C1815 (3 Pieces)
2. Resistor - 2.2 k ohm (3 Pieces)
100 k ohm (3 Pieces)
3. Capacitor - 47uf/ 16v (3 Pieces)
4. LED (Any Color) (3 Pieces)
5. Connection Wire
6. Soldering Iron
7. Copper Wire
8. Power Source (DC 12 Volt)
#ledchaser
#ledflasher
#motionblinker

[@fahimabdullahprince7850]

Hi ! My name is Fahim Abdullah Prince.Nice project bro.Thanks for making the project.

[@CreativeWorldPro]

It's my pleasure

[@angelmeghaa]

Thank you so much Real Video I'm Try It Great

[@CreativeWorldPro]

Best of luck

[@scottfranklin70]

I replaced the 2.2 k resistor with the 680 ohm one and it tried to work and it never tried again. Did I put the 680 ohm resistor in the right place?

[@CreativeWorldPro]

yeah

[@wltrpr]

Hola se puede hacer con una secuencia de cuatro luces en vez de tres ?

[@oldisgoldsongsdigital]

👌👌👌👌

[@screeper4576]

me gusta ver videos asi...
sin tarjecta.
puedo ver mejor, las conecciones.. i liked👌

[@CreativeWorldPro]

thanks a lot

[@veenaashok3258]

If we add one each I mean Can we use 4 transistors 4 resistors and 4 capacitors to run 4 led series, will it work

[@CreativeWorldPro]

yes, it will work

[@fahimabdullahprince3422]

Hi,Sir,How much you inputed ampere on the circuit?

[@CreativeWorldPro]

3 ampere

[@englanddanebarle3867]

Can I use a BC548 and a resistor with 47k and 330 ohms?

[@roldymotovlog8417]

I like this one! thanks.
can i use Transistor - C1815 and Capacitor - 47uf/ 16v , but my battery volt is 9v only ?

[@CreativeWorldPro]

you can use, easily.
i hope, it might work.

[@scottfranklin70]

What resister value would I use to have it work off of 3v? I have a toy traffic light that I I want to put this circuit in and it has a two AA battery holder in the back. Thanks

[@CreativeWorldPro]

680 ohm

[@scottfranklin70]

That would replace the 2.2 k ohm resistor that it shows in the circuit? Thanks

[@fahimabdullahprince7850]

Hi,Sir.Please make a new project in 3days.Thanks for make the project.

[@CreativeWorldPro]

I will try my best

[@fahimabdullahprince1916]

How much amperes you inputed on the circuit?

[@CreativeWorldPro]

1 amp

[@willyideas797]

How if I want to make 6 led or more ?
There is any components replace sir ?
Thank you

[@CreativeWorldPro]

don't need to replace.
you have to add same value component,,and need to connect as i do

[@willyideas797]

@@CreativeWorldPro what about the blinking speed, can be make slower and faster ?

[@CreativeWorldPro]

sorry sir, i can't control the blinking speed

[@edwinjamespaulpaul4806]

Maximum kitni led ka bana sakte hai or jyada transistar lagakar

[@CreativeWorldPro]

you can use more than 5 led

[@newzealandcricket1704]

Super bro

[@CreativeWorldPro]

thanks a lot

[@edwinjamespaulpaul4806]

Or ek transistar par kitni led run karwa sakte hai

[@CreativeWorldPro]

ek transistar par ek led run kar sakta ho

[@abdulbasyirmohddahalan3374]

One of 3 resistor to base must be lesser than 100 k so that it will become " starting device" of this whole system otherwise it will glow randomly without starting point i mean who will glow first.

[@twincamturbo461]

Can you light 5 LED lights?

[@CreativeWorldPro]

sure, i can do so

[@nguyenthinh6188]

Can i use 8050,9014 instead 1815?

[@CreativeWorldPro]

no

[@firdevsuzun9654]

can i use bc237

[@CreativeWorldPro]

if you want to use, for that you need to change the connection

[@newzealandcricket1704]

Macmath haduwa hari giya

[@ElectricCreative]

NICE video bro,,

[@JorgeLuis-po5uq]

Does it have to be a 47 microfarads

[@biswanathmandolbiswanath8194]

একটামাত্র আরজিবি এলইডি আস্তে আস্তে কালার চেঞ্জ হবে এরাম সার্কিট ডায়াগ্রাম দিলে ভালো হয়

[@CreativeWorldPro]

ok, Next time

[@mrbckshorts1493]

দাদা একটা স্টেপডাউন ট্রাস্নফরমারকে কি করে ১২ ভোল্ট বানাতে হয় সেই ভিডিও একটা অাপলোড করে দাও ৷

[@CreativeWorldPro]

ok,,banabo

[@lokeshgaurkar4861]

Can i use 10v 47 uf capacitor

[@CreativeWorldPro]

yes

[@elaamaya8536]

Diagram and circuit?

[@relampago1381]

Hello, good video, friend.

[@thrilokachandran.3693]

All the above given circuits are not working at all . Where are the flip-flop action take place ? But some types of IC can work .

[@bestamerica]

'
nice LED project...
try 10 LED lights

[@CreativeWorldPro]

Ok I will try

[@JorgeLuis-po5uq]

Please explain that the other leds don't light I try different connections still don't work

[@out-of-will]

Happened To Me Too, Depends If You Have Different Resistances Mixed Up, Switch Them Around And Try That.

[@yasseranwar3550]

Nice thankyou

[@elsindo]

I'm pretty sure that there is, out there in the market, an IC contains those transistors with the same working principles..
But good job tho..

[@CreativeWorldPro]

yes, you are right

[@elsindo]

@@CreativeWorldPro But the problem is: not every store that near to us sell the IC.. So we still have to understand the basic schematic like yours.. Great job!

[@CreativeWorldPro]

thanks for you compilation

[@innovative_ideas]

Who the he'll said base pin is at side

[@rayssimmons7798]

This circuit will not work properly, only the second and third light will flash .

[@brajeshtanti8655]

547 jal jaye to 1815 lga sakte hai

[@CreativeWorldPro]

you can use, for that, you need to change the connection of the circuit

[@herryoval6166]

if the LED is multiplied by more than ten seeds it can turn on like that not thank

[@JorgeLuis-po5uq]

I did it on breadboard and only one work

[@CreativeWorldPro]

all of them, should work,,
check all connection and all equipment/ component.

[@relampago1381]

YOU CAN TELL ME, THE ENTRY VOLTAGE.

[@CreativeWorldPro]

DC 12 Volt

[@nozirkhan8519]

Nozir