This is what I would do. Open Configuration->Configuration Wizard Add Anycubic Mega Zero with 0.4mm nozzle: 'Finish' Select the Mega Zero & 'Save current Printer Settings'. Save as 'Anycubic Kobra 1' General -> Size & coordinates -> Bed shape -> 'Set' Rectangular: 400x400mm ( what ever the bounds are. Im not sure for the kobra 1.) General -> Size & coordinates -> Bed shape -> Max print height: '450mm' ( what ever the bounds are. Im not sure for the kobra 1.) 'Save current printer settings
Has anyone added the AnyCubic printer in Prusa and tried to pause for color change? I noticed that AnyCubic or Cura slicers wont work or will pause and not resume. thx
The program said 10h+ to print those four foxes - is that normal? Im new to this and after I designed a simple 10x10cm house-shaped cookie cutter in Shaper3D I downloaded the Creality slicer and it said 6.5hrs 😮 I never imported that into my Kobra 2 Neo but is it likely it would actually take shorter for the printer to complete the print? Thanks!
![ЛЕБЕДЕВ у ДУДЯ: муху не обманешь 😁 [Пародия]](http://i.ytimg.com/vi/E74h5fvVrqs/mqdefault.jpg)
Thank you for this quick & informative tutorial 👌🏾
Thx for the help, man!
Solid info thanks
Nice. Thank you!
Yo can you make one for the Anycubic Kobra 2 plus ? I’m have if trouble dialing it in
thanks a lot for the video, which setting should i use for my kobra 1 ? thank you :D
This is what I would do.
Open Configuration->Configuration Wizard
Add Anycubic Mega Zero with 0.4mm nozzle: 'Finish'
Select the Mega Zero & 'Save current Printer Settings'. Save as 'Anycubic Kobra 1'
General -> Size & coordinates -> Bed shape -> 'Set' Rectangular: 400x400mm ( what ever the bounds are. Im not sure for the kobra 1.)
General -> Size & coordinates -> Bed shape -> Max print height: '450mm' ( what ever the bounds are. Im not sure for the kobra 1.)
'Save current printer settings
@@tsfablab thanks a lot !
How can i fix my Anycubic kobra 2 Max on prusa sliter
Has anyone added the AnyCubic printer in Prusa and tried to pause for color change? I noticed that AnyCubic or Cura slicers wont work or will pause and not resume. thx
Hello, Any idea which settings will suit best for my new Anycubic Kobra 2? I can't really find it..
same
I would keep these the same, just make sure you adjust the dimensions side to side and vertically to match the limits of your printer.
@@tsfablabso I follow your video step by step and this will work with my anycubic kobra 2 pro correct???
The program said 10h+ to print those four foxes - is that normal? Im new to this and after I designed a simple 10x10cm house-shaped cookie cutter in Shaper3D I downloaded the Creality slicer and it said 6.5hrs 😮 I never imported that into my Kobra 2 Neo but is it likely it would actually take shorter for the printer to complete the print? Thanks!
There are ways to increase your print speed. These models were set at a higher resolution to be used in casting so those tend to take longer.
Will this work with an Anycubic Kobra 2 Max?
Any advice for the AnyCubic Kobra Max?
In terms of setting it up? Use the basic settings for an anycubic from prusas print profiles and then adjust the print bed size.