HDJ40/80 Extracab Build FJ40 HJ47
Вставка
- Опубліковано 14 кві 2019
- Always liked the 40 series ute but found them a bit cramped inside for room. Set about gathering some parts and built a 40 series ute with an extra foot in the body. Only needed Chassis and front part of the body, some doors and the headlight surround so why not!.
Set it on an 80 series chassis and powered it by Toyota's 1HD-FT engine.
Took photo's along the way. Just under 2 years to build it from start to finish. Painted it Mustard as it stands out and looks smart in todays bland silver or black crop of modern vehicles.
Added an intercooler and new turbo to up the power a bit. Getting 530NM at the wheels at 1600rpm and 130kW.
It is very comfortable to drive. Feels like it can go anywhere and loaded up with camping gear should see a fair bit of touring over the next 30 years.
If you want to see it in action I did a video for Nulon as part of their Born this way series of modifiers. • Lawrence’s Extra Cab 4... - Авто та транспорт
I had a 1972 fj40 that i replaced the full rag top with an aftermarket half top...my rig looked like a pickup like this one...I had big Maxi Trac tires on it...I had it for 15 years and it wasn’t no pavement princess...it put thru some tough runs over the years...it never failed me...
That is incredible! A lot of skill and pride right there.
Very good job + looks! Drove both a FJ40(1979) in the 90ties and more recent 7years a HDJ80. You have best of both worlds!
You have done some incredible work, well done!
This thing is awesome. I would love to restore a 40 series pick up after my son and I finish our 1977 FJ40 build. Maybe that will be my next one to document and make some videos about. I also really love the FJ55's as well!!
Beautiful work!
Superb !!!!! Very well done and very well thought out, bravo!!!
What a brilliant endeavor…. You must be beaming with satisfaction and pride. I’m hooked and subscribing
Great work mate, spectacular job
این بهترین بازسازی تویوتا سری 40 بود که دیدم .واقعا عالی بود
magnificent work
Damn that must have been amazing when you started topcoating after all that fab work. Hats off to you sir.
beautiful work!! Realmente hermoso!
Craftsmanship at its finest 😘👌
Top notch mate. Well done
Beautiful! One day... one day...
Damn! That is phenomenal! I’ve been having very similar thoughts. FJ cab integrated into troopy tub, on a Coil sprung IFS 4 Runner chassis with a Supercharged Ecotec V6. I’ve made those choices just based on stuff i have lying around the farm. Just want something i can drive out to the bush block and carry some tools and the dirt bike in relative comfort. I’m not a huge fan of how most of the utes drive on bumpy roads (or the smooth ones).
Awesome work! You I give me inspiration
Easy tunes to listen too also👌
Fantastic work!
thanks, its such an enjoyable thing to drive around in as well. No more shaken kidneys!.
Wow, great job!!!
I must say that I did have fun building it and I still smile when I am driving it 1 1/2 years down the track.
Yepp, the steering wheel is on the RIGHT side... Beautiful job 👍
Spectacular job. I'll take one in denim blue please....
Great works
Great Channel... Congrats
Wow amazing job dude I wish I can do the same to my rusty fj40 .. All love from syria
thank you. its not hard, just a bit of time and the confidence in giving it a go. grinder and welder is all you need for your rusty 40 to become a non rusty 40.
Very very nice
Being 6’3” I wish I had an extra cab 45 series lol. I feel like I’m crammed into a sprint car sometimes. Amazing job mate.
I'm 6ft 4in and it is very comfortable.
Brilliant
That's great. It must have been many hours, but worth it in the end.
very much so. so comfortable and capable while looking old school.
Hermoso!!!
Skill Set: Checked!
Rare talent
WOW!!!!!
AWESOME!
thank you. was a lot of fun.
cooooool!!!
Woo your project it's 👌👌🙏
Awesome
thank you. currently building a tray and canopy set up for longer trips away. Will look a fraction different and so far it looks a bit tougher.
Time to go mudding
Thank you for this informative video cuz I've been working on my own build. I have a question about the infill bracket for the rear chassis cut. Is it installed as shown in the photo or is it inserted between the cuts
I love your work, I have always wanted to do a similar project, but on 2008+ Land cruiser, Auto Transmission. Let’s keep in touch
would love to see how you modified the hood to add the scoops.
you just have to buy a fibre glass bonnet off the internet
👍
Good job done here. Can we side chart for more info please.
Hi there, what sort of information are you wanting?.
😎👍
Hey Sporty 40 , where did you get the outer formed sheet metal you used to make the rear wheel fender flares ? I need those to make flares for my 40 !
I got some 76mm x 3mm tube bent to the shape that I required, then cut the tube in half, then cut the top section in half again to give me a left and right hand side. I then made a frame from 25.4mm sq and filled in the gaps with sheet metal. Took a while for each side but happy with the result. One is not a bit banged in after catching it on a tree but still looks the same.
@@itsfromlawrence Thank you so much for the tip , great idea ! I hate the fiberglass flares on my 40 and would like to replace them with something more durable .
hey there, did the h151f bolt straight to the 1hdt, because i am looking at putting a 79 series gearbox on the back of my turboed 1hz and was wondering if it would bolt straight in. my understanding is the 1hdt is the same as the 1hz but turboed from factory.
more or less. you have to change the input shaft and also the support tube on the front of the gearbox housing. H150/151 and now 152 are all the same physically just different rations.(150 for non turbo engines usually, 152 for turbod and fzfe) Just wondering if the fzfe engine has a different bellhousing. Mine was from a 1hz and it all came together.
Hey love the bus, I am building one at moment. Can I chat with you about the 3 wiper setup ?
sure. pretty easy. need the mechanisms from 2 screens and your away. plus a few measurements.
@@itsfromlawrence Can you measure on the frame and let me know what measurements you used please
Ada pabrik ini di negara Korea atau Taiwan.
Is it for sale? I want it
Please answer this how long did it take
was about 20 months from the start to driving it on the road. could be done sooner if you don't change the body or have to fabricate things as much as I had to.
I like video toyotalandcruiser....👍👍👍....sabahsarawaklovesafari
That thing is sic! Meet his brother: ua-cam.com/video/-numYlBMwus/v-deo.html
Jual body komplit utk FJ 40
How much in dollars please.Thanks