For those interested in buying one of these vs making one, I have them available for sale on my Etsy store. Here is a direct link: PowerDrillShield.com
Man wish I’d seen this a month ago. I am in process of learning how to make wooden knobs. My tool selection is limited so I have to improvise. I have been studying the dust/chip issue and this is perfect. Thx and I’ll look for plans but I should be able to configure.
I like this because it also let you use it with a fence. My Woodpeckers drill press table is on back order, but once it get here I'll be making one of these with a couple of mods. Nice job!
Glad you have it on Etsy, if on Amazon bet you could sell thousands but not sure of specifics and if it is worth the trouble. Nice product, buying one.
Great innovation. I made a slightly modified version from 1/2 inch Baltic birch ply last night and it works very well. Thanks for sharing your innovative solution to a frustrating problem.
I have an updated video to this where I have refined the design and started to produce these on my 3D Printer for sale. Check out PowerDrillShield.com for more info. This newer design yields better airflow and is compatible with more drill presses.
I would love to make this. If you could please send me a pdf on how to build one. I can’t wait to build it. The only thing I would like to change is, as you said, to extend the bottom to clamp on each side. I like the part it is portable!!
This design is genius! I love how effective this is and also how versatile it is. Just a really great invention. +1 on the plans for me too. I’m so glad I found your channel and subscribed. Your content is awesome. Keep it up! 👍🏼
Awesome, not only does it keep area clean ,but it is a great safety feature also. Would very much like to build one ,are you going to have plans for it in the near future ?
This is a super cool design. Thanks for sharing. I would totally use these plans. Keep it up man! There is a similar one done by Rings Workshop. He's got some awesome videos on this and similar subjects.
Thanks! I've seen some other designs, but they all relied on or is attached to the fence. I wanted something that was completely independent of the fence. Also, this allows it to be used with a handheld drill on the workbench. Thanks for watching!
Very nice project! The only potential issue I could see is that your drill press looked pretty close to bottoming out on the top of the box, potentially not being able to use the full capacity of the drill bit. Have you had any issues with that so far? - Joe
On my drill, the laser assembly is what causes the issue. I never use that. I may remove it then I would have a lot more clearance. Also, my drill only has a 2" max throw.
I guess if you like to spend your time making shop gadgets and dust collection stuff this is ok. I will just wear a mask and clean up with my shop vac, thanks.
Spending time making shop gadgets is fun by itself but when they can save you time so you can focus on building other stuff it is a win/win. That is what this product has done for me, less time cleaning up means more production in the shop.
For those interested in buying one of these vs making one, I have them available for sale on my Etsy store. Here is a direct link: PowerDrillShield.com
Just a thought. If these are 3D printed, would it be easier to add brush strips so they can go around the drill bit and not plexiglass?
I would like to see a set of plans
Man wish I’d seen this a month ago. I am in process of learning how to make wooden knobs. My tool selection is limited so I have to improvise. I have been studying the dust/chip issue and this is perfect. Thx and I’ll look for plans but I should be able to configure.
How easy and effective, made with offcuts. Love it
I like this because it also let you use it with a fence. My Woodpeckers drill press table is on back order, but once it get here I'll be making one of these with a couple of mods. Nice job!
Nice solution, best I have seen on UA-cam.
Really nice design. It would be great to have something like that for a router table.
Glad you have it on Etsy, if on Amazon bet you could sell thousands but not sure of specifics and if it is worth the trouble. Nice product, buying one.
Great design! Dust and wood chips are the bane of my existence. Plans for this would be much appreciated.
Yes please on the plans! The sliding plexiglass is a great idea.
Thanks! Working on the plans right now!
Very neat !! Would love to see some plans. This is a great design and very efficient!
Great innovation. I made a slightly modified version from 1/2 inch Baltic birch ply last night and it works very well. Thanks for sharing your innovative solution to a frustrating problem.
Great design! Yes, plans would be of great interest!
I have an updated video to this where I have refined the design and started to produce these on my 3D Printer for sale. Check out PowerDrillShield.com for more info. This newer design yields better airflow and is compatible with more drill presses.
Brilliant !!!!!. Thank you for sharing this great idea.
I also have these made on a 3D printer that are available for sale if you are interested. Check out PowerDrillShield.com for more info.
Very neat Would love to see some plans
Very simple solution to a common problem. I would love a set of plans.
Great dust control unit. Please send me the plans. Ready to build the unit. Thanks
Very well-made and done
I would love to make this. If you could please send me a pdf on how to build one. I can’t wait to build it. The only thing I would like to change is, as you said, to extend the bottom to clamp on each side. I like the part it is portable!!
Sorry, I dont have plans for this. But you can buy one at PowerDrillShield.com if you are interested.
Excellent
BRILLIANT!
awesome design, looks awesome!!
Man, I think I want to make every oneone of your projects! This one is no exception! Great job!!
Thanks Bob! I was really surprised by how effective this was. It was really just going to be a prototype.
Nice job
Excellent!
Great project. I really enjoy this type of video. I would definitely use a plan. Thanks.
Great design! Would love to see plans for this!
This design is genius! I love how effective this is and also how versatile it is. Just a really great invention. +1 on the plans for me too. I’m so glad I found your channel and subscribed. Your content is awesome. Keep it up! 👍🏼
Thanks, I appreciate it!
Do you have a video of your dust collection for your miter saw?
No sorry. I just made that to fit.
Awesome, not only does it keep area clean ,but it is a great safety feature also.
Would very much like to build one ,are you going to have plans for it in the near future ?
Working on something right now!
What part of IL are you in? I am in Aurora
This is a super cool design. Thanks for sharing. I would totally use these plans. Keep it up man!
There is a similar one done by Rings Workshop. He's got some awesome videos on this and similar subjects.
Thanks! I've seen some other designs, but they all relied on or is attached to the fence. I wanted something that was completely independent of the fence. Also, this allows it to be used with a handheld drill on the workbench. Thanks for watching!
Very nice project! The only potential issue I could see is that your drill press looked pretty close to bottoming out on the top of the box, potentially not being able to use the full capacity of the drill bit. Have you had any issues with that so far? - Joe
On my drill, the laser assembly is what causes the issue. I never use that. I may remove it then I would have a lot more clearance. Also, my drill only has a 2" max throw.
Very cool! Make me one?
You can buy one already made! PowerDrillShield.com
I guess if you like to spend your time making shop gadgets and dust collection stuff this is ok.
I will just wear a mask and clean up with my shop vac, thanks.
Spending time making shop gadgets is fun by itself but when they can save you time so you can focus on building other stuff it is a win/win. That is what this product has done for me, less time cleaning up means more production in the shop.