Mine has an issue where it slips off if you touch it. Maybe the screw is the wrong size? Idk but it just goes through the hole on my Glock and straight into the slot on the mag well, providing no tension.
Just ordered one of these for my Glock 45 from GlockStore. Not cheap but will look and function way better than the goofy Glock OEM magwell that was on it. Never, ever use red Loctite for any kind of gunsmithing or installing.
That Glock looks awesome and the addition of the magwell makes it extra delicious! I can't wait to get my G34 tricked out in the TTI makeover special. :) BTW ~ My new TTI STI JW3 Combat Master hasn't left my side since picking it up, it is truly amazing!
Nice! I recently purchased a G43X. Nice pistol, but the way my hand fits the grip frame, my little finger gets pinched between the mag base and the frame. I do not have the same problem with the G43. Any plans to make a magwell for the 43X? It may not even be possible. Thanks
@@TEMSWIL2067 nope not at all it.covers the gap not.fill it in. Few other companies make em as well but I hate em. Far too big and bulky and dont fit well. This one is great!
Mine is Glock 19 gen 5 Fs (second version , without half moon cut out ) order the Glock 19 gen 5 version . Fit like a glove ,only issue when release the mag it got snap half way out . It would not fall out freely .
I just got mine today to put on my gen 5 Glock 45, and it doesn’t fit at all. Not even close. It looks as if it may be for a gen 4, because there is no way it can accommodate the stock flared magwell lip.
Don’t feel bad. Mine after proper installation is loose ass fuck. Ditched it for a SLR Carry magwell. Way better..! Tried to stick with taran but customer service hasn’t even responded to me yet
@@JLin-iz9mr No fiction, complete whole truth. Red Loctite is permanent and cannot be removed. Maybe a blowtorch if you liquefy it but you would also damage any part it was used on.
Thank you for the great looking magwell, for my new glock! Great prices, quality product and fast shipping! Thank you Taran Tactical!
I have this carry magwell on my Lipsey’s Exclusive, Gray Gen4 G19. It’s AWESOME. Thanks, Taran 👍🏼
is that tallon grips on glock? I wanted to buy a magwell for my glock and have the tallon grips but idk if they would work together or not
Thanks bro 😅 It took me half an hour and nothing in the 2 minutes it took me to watch your video, the problem was solved.
Easy thanks nice design. Thanks❤
Be careful if you’re running mag extentions. Certain ones won’t work. Learned the hard way.
@hootie-so which extensions work with this magwell?
What tool did you use? Mine literally just came in today
Does it work with the G19 ?
Will this work on a Gen5 26
Will this work for a Glock 20 Gen 5
Will this work on the Glock 23?
What grip tap are you using ?
What Tool Is That So I Can Take My MagWell Off !
Where did you buy the magwell or does anyone know where to buy it
Mine has an issue where it slips off if you touch it. Maybe the screw is the wrong size? Idk but it just goes through the hole on my Glock and straight into the slot on the mag well, providing no tension.
might be a defective screw, try getting a new one ?
Magazine doesn’t fall freely with it. Gen 5 Glock 17 comes out about half way and it’s tight in the magwell towards the bottom
Mine is the same
Were you using mags with extended baseplates or standard cap OEM mags?
Anyone know if this covers the half moon cut? I couldn’t quite tell by the video
It does. just installed mine today.
Kedric Meredith sweet! Thank you
Just ordered one of these for my Glock 45 from GlockStore. Not cheap but will look and function way better than the goofy Glock OEM magwell that was on it. Never, ever use red Loctite for any kind of gunsmithing or installing.
The set screw u provide it your kit is cheap and strips super easy. For the 100 i paid i expected way better.
Lol how did you strip it? Maybe you are the problem
I have the exact same problem. And now the magwell is loose and the mag gets stuck during release.
I got mine on way
What Part Do I Need To Take It Off!
Torx bit screwdriver - T10
Just installed my mag well but it doesn’t allow mag to eject it just gets stuck. Bummer
same... came here hoping someone would have an idea for that..
Same with mine. Gen 5 Glock 17 gets tight towards the bottom bout 2 inches up into the magwell
Same with mine
Is this for your Glock 19 gen 5 regular or mos?
Mos
Just got mine today and bummed. It fits but I can't use my preferred back strap.
I’d say that you should try to modify the backstrap
Sucks this won’t work with the backstrap. 😩
This magwell will work on 19x
Do you have to remove the lip on the front of the magwell?
I ordered the same exact one for a gen 3 and the screw doesn’t even fit! Either they sent me a stripped one or defective one
Because it's meant for the gen 5 not the gen 3/4. The gen 5's mag lip much different than the gen 3/4's.
Its meant for gen 5. Order a gen 3 magwell. They have different lips, just like the other commenter said. It is not defective.
Import to france ? Buy in france ?
Please come in france !
NO RED LOCKTITE!!!!
Glock 20 gen 5 capability
Junk!
That Glock looks awesome and the addition of the magwell makes it extra delicious! I can't wait to get my G34 tricked out in the TTI makeover special. :) BTW ~ My new TTI STI JW3 Combat Master hasn't left my side since picking it up, it is truly amazing!
Very cool! Thanks for putting it up.
You are better off with Blue Loctite as it can be disassembled without using heat, red cannot.
Nice!
I recently purchased a G43X. Nice pistol, but the way my hand fits the grip frame, my little finger gets pinched between the mag base and the frame. I do not have the same problem with the G43. Any plans to make a magwell for the 43X? It may not even be possible.
Thanks
Will you be making for the g48 ?
Are there any magwells out there that will accept the Glock back straps without dremelling or altering the back straps?
Will this work with the G45
when will it be out sir ?
Does this work with the oem gen 5 baseplates?
That's what I'm curious about as well. My guess would be no but I could be wrong.
yes
Any chance or plans to make them for the Glock 45 ?
It should work should it not?
Glock 45 is Gen 5 is it not?
@@deediddy yes it works
Ok 👌🏻 the g45 doesn’t have the u shape on the grip! And taught that would be a problem!
@@TEMSWIL2067 nope not at all it.covers the gap not.fill it in. Few other companies make em as well but I hate em. Far too big and bulky and dont fit well. This one is great!
Thanks my man ! 👍🏻
Mine will not fit my gen 5 glock 19.... my Glock is stock and has the flared grip at the bottom. What am I missing?
Mine won't fit either and now my mags stick.
ItalianBrownsFAN what are you talking about?
Mine is Glock 19 gen 5 Fs (second version , without half moon cut out ) order the Glock 19 gen 5 version . Fit like a glove ,only issue when release the mag it got snap half way out . It would not fall out freely .
I just got mine today to put on my gen 5 Glock 45, and it doesn’t fit at all. Not even close. It looks as if it may be for a gen 4, because there is no way it can accommodate the stock flared magwell lip.
Don’t feel bad. Mine after proper installation is loose ass fuck. Ditched it for a SLR Carry magwell. Way better..! Tried to stick with taran but customer service hasn’t even responded to me yet
American Ingenuity!
1st !
-Gen5 Magwell- Oh Yeah install me Daddy!
Don't use red loctite unless you want it to be permanent.
Arne Asada that’s fiction dude
@@JLin-iz9mr
No fiction, complete whole truth. Red Loctite is permanent and cannot be removed. Maybe a blowtorch if you liquefy it but you would also damage any part it was used on.