Yeah well, I think you are right. The whole point of Airco's is that they dissipate the heat generated by cooling the air, outside. This thermocouple generates as much heat as it is going to cool down, effectively making it obsolete and a waste of energy. I actually believe you generate a bit more heat, overall.
Seems like heat is the most "hard to get rid off" energy. Removing heat will produce more heat. Any way we can use the heat to produce other form of energy that usefull
I Found 2 Joyenergy Semiconductor AC’s..Bought A 6” Duct.Cut A Cpl Holes On A 6” Wide Styrofoam Board,And Feeding It Out The Window,Works Nice..And Found The Little AC’s For $10 Each
Air cooler increase humidity. Use cold side peltier to condense humid air. Cool condensed water collected into the water tank. Use that that cool water to cooldown the hot peltier side. Pump, water cooling
@@debasishrath7943 i dont have material to do it. Maybe can use bigger cooling fin for the cold peltier side to avoid icing, but work as condenser. Put it inside air cooler casing. Condensed water will drop into water tank. Modify water pipeline from air cooler water pump to peltier cooling system before it gets to top water tank.
Air coolers are not meant to cool the room per se. It’s just to give relatively cool air delivery through the blower ( which ofcourse does cause cooling in dry heat but I dun think it lasts once the cooler is switched off). I can’t make out if he’s using the peltier to cool the water or the giant centrifugal fan is sucking the cool air generated by the peltier. I assume if the water is used to cool the hot side then lesser heat will be generated assuming the blower is sucking the cool air generated by the peltier. Anyways practical or no, cool video-
If your cool down your peltier with water and install a radiator to the cold side of peltier. Heat will be trapped in the water and when water gets too hot add block of ice or drain water replace. Also add a insulation divide the water reservoir from cool air section. this can also be portable running on lithuim batteries. Thats my idea wanting to do it for a long time but unable. Please try it just few modifications.
How did you connect the peltier system to the cooler? I wanna try it myself, but with a different setup, putting the peltier system outside the room, and the cooler near the window.
No it works, for my Hamsters enclosure at least. 50 X 50 X 60 centimeter, when outside temp is 33 to 34C the inside temp is comfort 26 - 23 C with thermostats controlled. And I use huge heatpipe heatsink with 12V 6Amps peltier. This vid setup only makes room even hotter more humid as well
Oye amigo si ya tienes un sistema de enfriado por agua del aparato aprovechalo en vez de utilizar la celda enfriada por el ventilador, y otra la celda va dentro del agua aislada y protejida la parte electrica; te recomeindo comprar un pequeño radiador de computadora para pasar el agua por el mismo y se refrijere mejor así como un bloque enfriador para colocarlo con la celda, y ocupa la parte mas grande de alumnio del kid que ya tienes y que este sea el que se congele en vez del pequeño, y saca la fuente de poder de ahí amigo te va a ser corto con la humedad como dice billy;saludos espero no haberte molestado y te sirva el consejo.
I think it may works better than ordinary air cooler if you put the side where the peltier is beside the window if you just want a direct cool air without adding water or ice at 26degreeC.this thing it will only works for people who live in a tropical country because we already considred/satisfied that temperature is cool air
This is a good way to blow and light your house on fire. The SMPS is kept inside the cooler where there is water activity. And we know water and electricity do not gel. If there is a water leak on to the SMPS, it will start to arc and burst into flames..
@@debasishrath7943it will not work because Peltier module generates a lot of heat on one side To absorb heat a heavy duty heat sink is required with FAN that will alone cost around 1800 INR To power that Peltier+ FAN a constant 6 Ampere SMPS power supply is required Total will be around 2500 INR Wastage of money and time.. Instead to this Peltier , ibstall a water chiller using compressor of an old refrigerator
@@eshaan5331 when it will be outside with the given heatsink arrangements or a slightly better one then the heat can easily get dissipated by the fan and outside wind..
Yo ya hice lo mismo que usted hizo y no sirvió para nada la plaqueta peltier en fría pero al pasar el agua por el compartimiento de aluminio vuelve a la temperatura ambiente y empieza a condensar agua, No sirve este método por que no enfría el agua,
The power you put in converts to heat in the room so you are actually heating the room while providing a small amount of cooling inside the cooler only. BTW you placing the transformed inside the wet unit is very dangerous.
i suggest that make another video that must connect the cool side tube to an evaporator and let it work in front of a fan, then the hot side must be placed outside the room so it will not alter the cool of the room...
Cold air from peltier module:✅ Heat air from power supply:✅ Risk of power supply falling to water:✅ Made the fan design uglier:✅ Only dropped less than 10 degrees:✅ Waste of material:✅ Permanently make hole:✅ Not effective and not efficient:✅
Ok, looking at it physically. The Idea is nice actually, but sucking the cold air from outside and blowing it back outside after it cooled the hot peltier side would be useful. In this setup, you increase room temperature and waste energy
acho que a agua p esses caninhos no dissipador prejudica o desempenho da peltier. da p perceber c o gelo derretendo no dissipador . Bom seria a peltier na frente do ventilador ou diretamente na água.
Duh you are dumping the heat you pulled from the air passing the inside of the air cooler......back in the room. In essence warming up the room not cooling it
Non waterproof smps inside the unit where water drops all three sides!. Shitty safety. Ordinary air cooler drops even 9 degrees. Fucking background music spoiled this video.
![[Tutorial] How To DIY Peltier Water Cooler System For Aquascape](/img/n.gif)
The thermodynamic equivalent of chasing your tail!
This is just as practical as modifying a toaster oven to work as a space heater.
Hahahaha
Yeah well, I think you are right. The whole point of Airco's is that they dissipate the heat generated by cooling the air, outside. This thermocouple generates as much heat as it is going to cool down, effectively making it obsolete and a waste of energy. I actually believe you generate a bit more heat, overall.
😂😂😂😂
The fan in the hot side of the petier will blow more hot air than the cold side cool, this will warm the room up without ducting the heat outside
Whats the solution then? You have any better solution 😊😊
@@animavaidya9920 how about you? he gave a heads up by stating the problem which can be fixed later. You? not so much loser.
@@animavaidya9920 liquid cooling
keep window open
@@animavaidya9920 He said, duct the air outside.
Seems like heat is the most "hard to get rid off" energy. Removing heat will produce more heat. Any way we can use the heat to produce other form of energy that usefull
I Found 2 Joyenergy Semiconductor AC’s..Bought A 6” Duct.Cut A Cpl Holes On A 6” Wide Styrofoam Board,And Feeding It Out The Window,Works Nice..And Found The Little AC’s For $10 Each
what you are looking for is finally there, thank you friend
🤷🏼♀️What?..How To Electrocute Yourself🤣🤣🤣
Air cooler increase humidity.
Use cold side peltier to condense humid air.
Cool condensed water collected into the water tank.
Use that that cool water to cooldown the hot peltier side. Pump, water cooling
Nice idea...can you upload video about same? Like use drawings if difficult to do model like shown in video
@@debasishrath7943 i dont have material to do it.
Maybe can use bigger cooling fin for the cold peltier side to avoid icing, but work as condenser.
Put it inside air cooler casing.
Condensed water will drop into water tank.
Modify water pipeline from air cooler water pump to peltier cooling system before it gets to top water tank.
Air coolers are not meant to cool the room per se. It’s just to give relatively cool air delivery through the blower ( which ofcourse does cause cooling in dry heat but I dun think it lasts once the cooler is switched off). I can’t make out if he’s using the peltier to cool the water or the giant centrifugal fan is sucking the cool air generated by the peltier. I assume if the water is used to cool the hot side then lesser heat will be generated assuming the blower is sucking the cool air generated by the peltier. Anyways practical or no, cool video-
who install a powersupply inside high humidity condition??? u ask for shortcircuit soon
Agreed 😂😂😂
Stop Telling Them🤣Were Trying To Thin Out The Herd😂😂😂😂
ganito talaga naiisip kong gawin.. buti nlng nakita ko video mo, thanks po. alam ko na mga bibilhin ko.
puta🙄🙄🙄😅, nag add lng sya ang heat😅
If your cool down your peltier with water and install a radiator to the cold side of peltier. Heat will be trapped in the water and when water gets too hot add block of ice or drain water replace. Also add a insulation divide the water reservoir from cool air section. this can also be portable running on lithuim batteries. Thats my idea wanting to do it for a long time but unable. Please try it just few modifications.
How did you connect the peltier system to the cooler? I wanna try it myself, but with a different setup, putting the peltier system outside the room, and the cooler near the window.
No it works, for my Hamsters enclosure at least. 50 X 50 X 60 centimeter, when outside temp is 33 to 34C the inside temp is comfort 26 - 23 C with thermostats controlled. And I use huge heatpipe heatsink with 12V 6Amps peltier. This vid setup only makes room even hotter more humid as well
It can go from 28°C to 10,000°C in that room real quick with that power supply.
Try to have a separate container of radiator coolant for the hot side of the peltier
Oye amigo si ya tienes un sistema de enfriado por agua del aparato aprovechalo en vez de utilizar la celda enfriada por el ventilador, y otra la celda va dentro del agua aislada y protejida la parte electrica; te recomeindo comprar un pequeño radiador de computadora para pasar el agua por el mismo y se refrijere mejor así como un bloque enfriador para colocarlo con la celda, y ocupa la parte mas grande de alumnio del kid que ya tienes y que este sea el que se congele en vez del pequeño, y saca la fuente de poder de ahí amigo te va a ser corto con la humedad como dice billy;saludos espero no haberte molestado y te sirva el consejo.
Amigo cuanto le costó este producto? Si sería tan amable y si enfría el ambiente?
I think it may works better than ordinary air cooler if you put the side where the peltier is beside the window if you just want a direct cool air without adding water or ice at 26degreeC.this thing it will only works for people who live in a tropical country because we already considred/satisfied that temperature is cool air
This is a good way to blow and light your house on fire. The SMPS is kept inside the cooler where there is water activity. And we know water and electricity do not gel.
If there is a water leak on to the SMPS, it will start to arc and burst into flames..
En dónde compraste el kit completo yo también quiero hacer con el mío ventilador cooler pero el mío es de 45 litros
lo venden en ali we yo apenas hice este experimento con mi cooler y tarda bastante en minimo refrescar pero algo es algo
А відвід тепла від модуля Пельт'є відбувається в ту ж саму кімнату. ))) Тому переробка абсолютно безглузда!
can you test the temp breathing out in the heat side of the peltier?
Just add a duct pipe for that heat fan to push hot air outside as you see in a portable AC unit via a window frame
Im curious how long this lasted :)
Can you try to use water block to remove heat to outside the room? Using long hose to deliver the heat to the fan and radiator outside the room
So where does all the heat off the hot side go? Oh that's right! Back into the room you're trying to cool! EPIC FACEPALM
boss pwde b ung 60w power supply? ..ska pano nkatap?
Waste of time, you are actually adding heat to the room
What if he placed the cooler outside the room?
How it add more heat?can you explain?
@@kozulgaming7349 efficiency of the peltier is very low, I add heat of more than it cools, don't forget to add the current bill increase
@@debasishrath7943it will not work because Peltier module generates a lot of heat on one side
To absorb heat a heavy duty heat sink is required with FAN that will alone cost around 1800 INR
To power that Peltier+ FAN a constant 6 Ampere SMPS power supply is required
Total will be around 2500 INR
Wastage of money and time..
Instead to this Peltier , ibstall a water chiller using compressor of an old refrigerator
@@eshaan5331 when it will be outside with the given heatsink arrangements or a slightly better one then the heat can easily get dissipated by the fan and outside wind..
Yo ya hice lo mismo que usted hizo y no sirvió para nada la plaqueta peltier en fría pero al pasar el agua por el compartimiento de aluminio vuelve a la temperatura ambiente y empieza a condensar agua, No sirve este método por que no enfría el agua,
Good knowledge from you ,
The power you put in converts to heat in the room so you are actually heating the room while providing a small amount of cooling inside the cooler only. BTW you placing the transformed inside the wet unit is very dangerous.
but how mush electricity this additional thing consume
Pwede ba ang mist maker sa air cooler?
Siguro ang karamihan sa mga air cooler ay may built-in na humidifier, so no need na 🤔
Ye sara materials kis website pe mil raha hai link share karo na
i suggest that make another video that must connect the cool side tube to an evaporator and let it work in front of a fan, then the hot side must be placed outside the room so it will not alter the cool of the room...
Why abuse this swamp cooler?
Cold air from peltier module:✅
Heat air from power supply:✅
Risk of power supply falling to water:✅
Made the fan design uglier:✅
Only dropped less than 10 degrees:✅
Waste of material:✅
Permanently make hole:✅
Not effective and not efficient:✅
Where did you buy the peltier
Ebay…Their Cheap..This Doesnt Work,Or Everyone Would Have 1
Ok, looking at it physically. The Idea is nice actually, but sucking the cold air from outside and blowing it back outside after it cooled the hot peltier side would be useful. In this setup, you increase room temperature and waste energy
In fact great. I dont like the music of the intro... but is not important
And it will shock and cause fires when the fan tips over
Does it last 24 hours?
Ake time tha jab loge bolte the ki ietani ho jayagai ki cooler ke liye fan lagana padega that time ahead😂😂😂😂😂😂
hahaha with peltier 06? Omg, Nobel immediately!
Its a no no. 12v power suppply will get well inside.
Here the main two problems are Humidity and heat released by peltier.
Price kya h ac . cooler
Tq
Can i connect 5amp or 6amp smps
yes,
And here you can see how to built a fan heater and room humidifier...
Kak , terima jasa pemasangan nya ga?
wait till the aircooler toppled . you'll get the shock of your life.
Bro Buy Karne ka link v share karte na
Bad. The hot side must be outside of the room and isolated, with this you're getting a fresh breeze output and a hot as hell room
Lol this is not AC just small chiller man
It increase the electric bill a lot. And at last cooler air or not. Aircon 0.6kw not more expensiver maybe 500ph more but cold roooooooom
uram probáld meg az hogy a peltier cellát egy 10 literes hütőtáskára szereled és a és építesz egy kondenzátor a léghűtő filtere elé 30 c - 15 c lesz
Boss paano nyo kinabit yyunh wirin gagayahin ko sana
you should throw the heat air away too outside room from hot side peltier
How much time it took to cool entire room i.e from 33°c to 28°c ?
Maybe until next winter .
Kaya ba palamigin buong kwarto sir
You need to isolate the heat away from your room
Air xcoolers already make water cold,so this is just a waste 😂
Bagaimana cara merakit nya
ada patokan gaksih, mana air cooler yang bisa diupgrade mana yang enggak?
acho que a agua p esses caninhos no dissipador prejudica o desempenho da peltier. da p perceber c o gelo derretendo no dissipador . Bom seria a peltier na frente do ventilador ou diretamente na água.
Plz give me some information.
Plano ko gawin to,pero l sa labas ng kwarto ko ilalagay yung mismong peltier.
Duh you are dumping the heat you pulled from the air passing the inside of the air cooler......back in the room. In essence warming up the room not cooling it
pwedi po ako pa install sa aking air cooler ng cooling sistem
Keep electrics always isolated
waste lot of Ampere and cold and hot still in same room😂
This just experiment, just do it and improve.
Itu tdk efesien sebab panas di buang di ruangan sama
Mag kano pa gawa?
You just added more heat in to the room
Where is the tutorial??
My design is better and I made it first
More
Funny
Completely unnecessary operation, no air conditioning from Peltier
브로 어딘겨
Ideia bem idiota, 😅 acho que ele não fez uma análise do próprio projeto 😅😅😅😅
Non waterproof smps inside the unit where water drops all three sides!. Shitty safety. Ordinary air cooler drops even 9 degrees. Fucking background music spoiled this video.
Why does youthoob gives so many views to such useless videos? 😡
Useless 😅😅😅😅
Why did you make even that and I don’t you did you got it done and tada……🥸
Sir pwd ba sa kwarto to..kaya po ba palamigin...