with grease do not hesitate to fill the diff well. on the other hand on the models with a joint where you will rather put specific oil. you have to go up to the axis of the satellites approximately.
You know if you do break an outdrive you can add the planetary gears to your new diff to have 4 instead of 2 I did it to mine a couple months ago and I run mine hard been fine
are you trying to convert one? I have a brushless one too.. world of difference.. but it cogs so bad on dirt.. I didn’t do the video because the brushed one has its advantages over the brushless one
@Chris Craft hey are u still running these little cars? I just got the eat15 brushed a month ago, and a second brushed one a week ago. so I tried 12.6v from a 3s lipo, for science, it runs great! Harder to control because it's so fast! The 3way speed switch works beautifully. I have the eachine eat15 that comes with a heatsink on the motor.
with grease do not hesitate to fill the diff well. on the other hand on the models with a joint where you will rather put specific oil. you have to go up to the axis of the satellites approximately.
Traxxas got the same tool set😁👍
Great 4 a beginner and a pro
congratulations for the video I changed mine for a metal differential it was very strong
How did it hold up. People always say not to use lithium grease but I don't see the problem. Nice vid.
Did you ever make a video of the brushless kit installation and your thoughts?
You know if you do break an outdrive you can add the planetary gears to your new diff to have 4 instead of 2 I did it to mine a couple months ago and I run mine hard been fine
I do this with my rc car and it runs so much better 👍🏻👍🏻👍🏻
Are you going to post the brushless motor install? I’m curious! Great video!
are you trying to convert one? I have a brushless one too.. world of difference.. but it cogs so bad on dirt.. I didn’t do the video because the brushed one has its advantages over the brushless one
@@chriscraft2 have you found any fix for the awful cogging?
@Chris Craft hey are u still running these little cars? I just got the eat15 brushed a month ago, and a second brushed one a week ago. so I tried 12.6v from a 3s lipo, for science, it runs great! Harder to control because it's so fast! The 3way speed switch works beautifully. I have the eachine eat15 that comes with a heatsink on the motor.
White lithium grease bro
it's help me bro, tnx a lot 👍
Time to hit some track
Would WD40 do?
I would NOT use that but it will work if that’s all you have.. you can get grease for a few dollars in a smaller tube
Man I can’t get parts
what parts you need I may part 2 out on eBay
AliExpress