A metal lathe would be on the top of my wish list. The work, cleaning, scrapping, sanding, priming, painting much less putting each segment of this well built machine back together is truly the results of a driven man. It is yours now, but this video is proof to your great grandchildren 45+ years from now, of a fraction of what you have accomplished. This something to be proud of. You have my respect and admiration for your efforts. Thanks for sharing with us. ASE Automotive Master Tech since 1978.
Amazing work Mateusz, great work scraping and prepping the “ways” of your lathe. This is considered an art that is slowly disappearing here in the US and the rest of the world. I hope you keep that lathe running true and square for the next 50-60 years.
Muito bom amigo!!!Excelente vídeo e trabalho amigo!!!Parabéns pela restauração do torno,ficou novo!!!Obrigado amigo e minhas saudações e do Brasil a você amigo!!!
This was impressive, fun, and inspirational - and the film itself was equally well done. At near 60 years old and in medical retirement, I've started my own very small machine shop as part of my rehabilitation from cancer, and my lathe is probably 1/5 the size! While watching this I had a memory of being in my 20s with a young wife and a new family of little children. We bought a very beat up looking piano for a very small amount of money. My friends and I had to get it into our house, which wasn't easy. But the memory is that I completely rebuilt a piano - something I knew absolutely nothing about - and succeeded because no-one told me I couldn't!! Watching you, I wondered if this was like the piano (except you seem to know your way around a lathe and machinery very well). Thank you.
@@VE427HDT 2:41 he did more than just paint it. Scaping in the ways isn't as simple as it looks. Easy to do a lot more harm than good if you lack the skill and patience to do it properly.
Fajnie się ogląda i przypomniałem sobie jak swoją remontowałem. Moja tokarka jest bardzo podobna i nazwa jej The Sebastian Lathe C.O. Cincinnati Ohio USA. Amerykanie dali w 1944 do ZSRR a oni przywieźli do Polski w ramach bratniej pomocy, ale oczywiście trochę zdekompletowaną. W 1960 mój wujek zakupił i uruchomił w swoim warsztacie. Wujek zmarł w zeszłym roku a mi pozostała tokarka, którą identyfikowałem w necie kilkanaście dni bo ciężko znaleźć tak stare tokarki. Moja jest pewnie gdzieś z lat 20-tych.
Very impressive. I consider myself fairly mechanically inclined and did a refresher on my own (much smaller) lathe. I'd probably have an aneurysm trying to do what you just did there. Awesome vid👍
It is a MAS Czechoslovakian lathe, many years ago when I was a boy I worked in a workshop that had a lathe just like that and I had to do a lot of work with it. It brought back very nice memories
Muito bom , gostei de ver , trabalhei 40 anos nesta área , meus olhos brilharam de alegria de ver esse trabalho , trabalho este de um mestre diga-se de passagem , parabéns .
Nie wiem jak to określić, bo już mi się ta maszyna podobała przed odświeżaniem, ale teraz to nie mogę przestać o niej myśleć .... Uuuhhhmmm, Marzenie! Wspaniała robota gaspadin!
When i look this short video... i wished im finished my lathe project so quick as you... :-( How long did you need for restoration and what Brand/Model is your lathe? Thanks for sharing!
Директор по охране труда ушел на обед - Токаря наматываются на валы, сварщики протирают кислородные баллоны маслом, крановщик на кранбалке уехал в магазин......
Hello. I have seen similar lathe in this video too. But I don't know name of the maker because the lathe had been refreshed by Japanese company. Do you know lathe name in this video?
You ain’t shitin the shop I work at has a 30 foot long American pacemaker from the 40s. After running it for a few days it makes every other machine in the shop feel like a spongy piece of shit.
обратите внимание какой был раньше дизайн,хотя он усложнял изготовление,в прошлые века вообще узорами всякими станки украшали,а теперь строго прямоугольные формы,ничего лишнего
Very nice job. Should the new electrical switch have a mushroom head on the OFF button larger than the ON button ? This would be normal on new equipment in the UK. Regards Arnold
Собственно, вопрос: а что там реставрировать ? Там и так все отлично функционирует, ничего сломанного нет. Поэтому, осталось только чистить и перекрашивать
Yes indeed, they don't build Lathes like this anymore, think of all the machine work on this old job, I don't recommend this unless you know the machine inside out. too many small pins and fastenings, each having a purpose.This guy is a Hot Shot for sure.
AussieBlokeGordo would this help identify this engine lathe? www.homemadetools.net/forum/lathe-restoration-sn20-68023 Nice job cleaning it up! RL Buffalo, NY USA
Man, I wish I could do that. I would get it apart, cleaned up, put 1/4 of the way back together, and it would be that way for another three years and half the pieces would be lost.
Навести марафет это не восстановление....! В станке важна техническая часть! Если в нем убитые теже направляющие или шпиндель, то на нем только болты с гайками точить для заборов!
I study engineering, we work in practice on many machines including a lathe. We have several modern machines with electrical sensors in the school. It makes work much easier and more accurate. However, we still have machines in the school that are 50 years old in good condition. they are Czechoslovak production (now Czech Republic and Slovakia) so I think they will still be here for a long time. What I mean is that these machines are a piece of art. Just an electric motor and lots of metal parts ... it's amazing to work on it, it has its magic. Rely on your head and hands and not on your computer. Very well done renovation work, well served! But you should measure the machine geometry!!! Thank you for reading and sorry for the English.
Что то не увидел восстонавления станка...чистка, смазка, переборка, губы конечно станку покрасил хорошо....но где востонавление...в задней бабке пластины уже говорит о том что опущена она по уму бы расточить и ремонтную пиноль поставить...о геометрии направляющих вообще молчу один бог знает в каком она состоянии...а так вернее было бы назвать отделочно покрасочными работами
Mateusz,Ну... Это не восстановление ,а ОЧИСТКА станка. У твоего станка техническое состояние ОТЛИЧНОЕ, 1.направляющие ты не восстанавливал 2.шестерни не менял , 3.подшипники тоже , 3.патрон ты только почистил от ржавчины,а не притирал , 4.ходовой винт и маточная гайка в порядке , 5.подачи работают , 6.задняя бабка без люфта пиноли. Что ещё надо?)
First Class craftsmanship
Millwright/ machinist/fabricator, amazing job , I enjoy watching this more then NFL now , thanks my brother
Wow 😮 just WoW 😲!! Brilliant workmanship and beautiful craftsmanship! Great video!👍🏻❤️😊🛠
A metal lathe would be on the top of my wish list. The work, cleaning, scrapping, sanding, priming, painting much less putting each segment of this well built machine back together is truly the results of a driven man. It is yours now, but this video is proof to your great grandchildren 45+ years from now, of a fraction of what you have accomplished. This something to be proud of. You have my respect and admiration for your efforts. Thanks for sharing with us.
ASE Automotive Master Tech since 1978.
Za każdym razem oglądam ten film i podziwiam Twoją cierpliwość, umiejętności i miłość do pracy.
excellent work. i love seeing old machines given new life and a new purpose. well done
Amazing work Mateusz, great work scraping and prepping the “ways” of your lathe. This is considered an art that is slowly disappearing here in the US and the rest of the world. I hope you keep that lathe running true and square for the next 50-60 years.
I keep this lathe :)
His scraping was a bit off though, you would end up with groves using that method, you need to scape in multiple directions to avoid this.
Разобрал?- бывает.
Почистил, покрасил.- молодец.
Но- СОБРАЛ!- Уважаю! Мастер.
Ну не говорите, мастер 100 уровня.
खराद सागाड़ु मसिन क्या रेट है
косметическое обслуживание.а направляющие ,а зазоры в винтах ?
@@jairamleelawat9368
What a fuck is this!??
Hand scraping, You are are keeping it alive. Thanks,very impressive.
Etwas mit so viel Liebe und Leidenschaft zu restaurieren ist einfach genial 🤩🤩🤩
Das Endresultat ist echt sehenswert 👍👍👍
Na początku myślałem, że już po tokarce, ale na końcu widzę, że działa i świetnie wygląda, szacun za wykonaną pracę. Zapewne posłuży wiele lat!
Służy dobrze :) zapraszam do najnowszego filmu tam widac ze daje rade :)
Tytaniczna robota, zwłaszcza z odbijaniem młotkiem starej farby. Jesteś majster pierwsza klasa, gratuluje:)
Like watching an episode of Benny Hill when it's sped up... great job 😀
Ładna tokareczka dobra robota łapka w gure.
The world needs a lot more people like you! Fantastic job! Best regards from Colombia South America.
Except for paint job and scraping nothing good
My goodness so much work. Great job.
Super!!!Dobra robota.Pozdrawiam
Красава мужик! Инструмент тоже уважения требует. Молодец.
Это правда!
cubañe
Gratuluje fachu i precyzji.Bardzo dobra robota.
Muito bom amigo!!!Excelente vídeo e trabalho amigo!!!Parabéns pela restauração do torno,ficou novo!!!Obrigado amigo e minhas saudações e do Brasil a você amigo!!!
Sim, ele deixou o torno zerado.
Great job, man! You extended that lathe's work-life. Looks great. Clean and tidy workshop too!
Главное точность детали изготовленной на этом станке, а как он выглядит это на любителя эстета
Well done! Thank-you
This was impressive, fun, and inspirational - and the film itself was equally well done. At near 60 years old and in medical retirement, I've started my own very small machine shop as part of my rehabilitation from cancer, and my lathe is probably 1/5 the size! While watching this I had a memory of being in my 20s with a young wife and a new family of little children. We bought a very beat up looking piano for a very small amount of money. My friends and I had to get it into our house, which wasn't easy. But the memory is that I completely rebuilt a piano - something I knew absolutely nothing about - and succeeded because no-one told me I couldn't!! Watching you, I wondered if this was like the piano (except you seem to know your way around a lathe and machinery very well). Thank you.
Beautiful, thanks for sharing
@@VE427HDT 2:41 he did more than just paint it. Scaping in the ways isn't as simple as it looks. Easy to do a lot more harm than good if you lack the skill and patience to do it properly.
Przyjemnie się ogląda, zostawiam suba i na pewno tu wrócę. Powodzenia !
Fajnie się ogląda i przypomniałem sobie jak swoją remontowałem.
Moja tokarka jest bardzo podobna i nazwa jej The Sebastian Lathe C.O. Cincinnati Ohio USA.
Amerykanie dali w 1944 do ZSRR a oni przywieźli do Polski w ramach bratniej pomocy, ale oczywiście trochę zdekompletowaną. W 1960 mój wujek zakupił i uruchomił w swoim warsztacie. Wujek zmarł w zeszłym roku a mi pozostała tokarka, którą identyfikowałem w necie kilkanaście dni bo ciężko znaleźć tak stare tokarki. Moja jest pewnie gdzieś z lat 20-tych.
My congratulations to you for this restoration !!! Thanks a lot for the kind sharing, ciao Nicola from IT
Very impressive. I consider myself fairly mechanically inclined and did a refresher on my own (much smaller) lathe. I'd probably have an aneurysm trying to do what you just did there. Awesome vid👍
Не битый, не крашеный, директор завода точил гайки по выходным!😀😀😀
Третий станок в семье
Bu en tr a b ajo fe l i z c ldades b u eno m e g u st o a m ig o
👏👏👏👏 ficou novo, de novo, parabéns trabalho super bem executado 👍👍👍👍
Wow that is absolutely beautiful!
It is a MAS Czechoslovakian lathe, many years ago when I was a boy I worked in a workshop that had a lathe just like that and I had to do a lot of work with it. It brought back very nice memories
Top 10 fast workers.
Nice small lathe. Good job, not just painting - scraping and precision measurment included. Good that basic rails in a good condition.
Thanks :)
да!
@@MateuszDoniec que torno es
Muito bom , gostei de ver , trabalhei 40 anos nesta área , meus olhos brilharam de alegria de ver esse trabalho , trabalho este de um mestre diga-se de passagem , parabéns .
Absolutely beautiful!!!
Zajebiście wyszło
Заебись вышло? Я казах. Но по ходу я понимаю по польски))))
@@azamatsansyzbaev1037 я очень рад, я знаю русский язык, все буквы знаю, читать тоже. Где ты живёшь?
@@polskapoland5203 Казахстан
@@azamatsansyzbaev1037 я выпью за ваше здоровье, горные братья.
@@polskapoland5203 нееет, за меня пить не надо. Лучше 20 отжимания забацай.
Отличная предпродажная подготовка! Потом в объявлении будет - не бит, не крашен, блондинка иногда работала.
Блондинка локоны крутила на нём.
You never delivered this lathe to my house ... I've been waiting lol, good work man
Good job. That was alot of work and keeping track of part. Amazing job really.
Мужик, официально заявляю, твои руки растут из плеч!
Мало того, еще и тем концом.
красивый станок, получил вторую жизнь. видимо состояние хорошее, не пришлось ничего ремонтировать
Just think how proud and happy that old girl is - she's ready for another century of hard work !
Nie wiem jak to określić, bo już mi się ta maszyna podobała przed odświeżaniem, ale teraz to nie mogę przestać o niej myśleć .... Uuuhhhmmm, Marzenie! Wspaniała robota gaspadin!
When i look this short video... i wished im finished my lathe project so quick as you... :-( How long did you need for restoration and what Brand/Model is your lathe? Thanks for sharing!
no pięknie żeś ją odpicował :) taka lalunia w warsztacie to skarb gratuluję efektu
Nice job. Love the green.
"Lathe Refreshment" is the beer (or two) I have at the end of (or in the middle of) my day's turning work on the lathe. 🍺🍺🍺
Isso sim é uma revisão caprichada, 👍👏👏👍
Parabéns!
precisamos passar este video pro Leandro torneiro ver ......
Agora já são automaticas e por 💻
Beaucoup de travail et, au final : un superbe résultat. Bravo
Vous avez toujours une machine usagée, alors !!!!!
Залипательное видео, с большим интересом смотрю сам токарь по специальности. Не приходилось разбирать станок. Спасибо за видос. Лайк.
oglądałem twoje filmiki i muszę przyznać że masz talent super ci to wychodzi
Красава!!!Я простые тиски очкую разбирать,собрать смогу только в мешок и на металлолом!!!Уважаю!!!
Lёha cool السلام عليكم انا من مصر وعندى نفس المخرطه عاوز منك صورة من جدول الاووظ ابعتهولي علي الوتس ت 01003575176 شكرا
Très belles restaurations ! Le résultat est magnifique.
Thanks :)
I second that, nice job.
Gran trabajo!...Saludos desde Argentina.
Просто молодец! Я не представляю откуда столько у человека терпения!
большая и кропотливая работа!!!! удачи вам ребята!!!
Директор по охране труда ушел на обед - Токаря наматываются на валы, сварщики протирают кислородные баллоны маслом, крановщик на кранбалке уехал в магазин......
молодеж не оценит, не масла не магазина.
Али Алиев Молодые тоже разные бывают, но в целом, увы - верно.
Да всё нормально, это называется естесственный отбор. В 80х годах, когда я в пту учился на токаря, у нас тоже такие были.
AMBITNIE i to coraz bardziej!
Świetna robota, Ty to jesteś fachowiec
Muy bueno. 10 puntos..
Czekałem aż ktoś w Polsce zacznie robić takie filmy 😃
A to nie w Polsce?
@@karolwozniak8820 No właśnie (chyba) w polsce więc napisalem, że czekałem na to bo za granicą jest bardzooo dużo tego typu filmów =)
Zapraszam do mnie na kanał ;D
Tak to w Polsce :D
@@MateuszDoniec No to życzę rozwoju i wbicia sie w algorytmy =D
Świetna robota, wygląda jak nowa :)
Beautiful job it's like a new one you must be proud of yourself well done ole buddy
here at my company we have a similar machine from 1948.... old machines are the best!
Hello. I have seen similar lathe in this video too. But I don't know name of the maker because the lathe had been refreshed by Japanese company. Do you know lathe name in this video?
You ain’t shitin the shop I work at has a 30 foot long American pacemaker from the 40s. After running it for a few days it makes every other machine in the shop feel like a spongy piece of shit.
Это сколько терпения и крепких нервов нужно чтоб такое проделать? Красава.
Solo una parola...Maestro!!!👍
Very good job Mateusz ! Thanks Radek
обратите внимание какой был раньше дизайн,хотя он усложнял изготовление,в прошлые века вообще узорами всякими станки украшали,а теперь строго прямоугольные формы,ничего лишнего
они еще и не разваливались через год использования)
Sem comentários. Perfeita restauração. 👍👍👍👍👍
Fajna robota. Więcej takich filmów!
Nice restoration! Thanks for sharing.
Very nice job.
Should the new electrical switch have a mushroom head on the OFF button larger than the ON button ? This would be normal on new equipment in the UK.
Regards Arnold
yea!
0:40 - do not do this to your tail-stock quill.
It will get all loose and wiggly when re-fitted.
Magnificent work! 👍
Thanks :)
Rzadko już można spotkać fachowca , mechanika maszyn i urządzeń przemysłowych. Pełen szacun do wykonanej roboty.
В плане эстетических форм этот аппарат весьма привлекателен
Почистил, покрасил а где восстановление?
Собственно, вопрос: а что там реставрировать ? Там и так все отлично функционирует, ничего сломанного нет. Поэтому, осталось только чистить и перекрашивать
Так шабрил же
@@GamerDudeTV Ну конечно у таких станков д**** чего надо делать там люфты б**** рельсы н**** там зазоры везде направляющие убитые шпиндель восьмёркой
@@user-qq3bv8oi8g Это черновое шабрение . Такой толстый слой краски на непонятной точности плите...
Nice job, like awesome.! Makes me want to look for old machinery to restore.
Yes indeed, they don't build Lathes like this anymore, think of all the machine work on this old job, I don't recommend this unless you know the machine inside out. too many small pins and fastenings, each having a purpose.This guy is a Hot Shot for sure.
Beautiful!!! Thank you for sharing..
Thanks :)
На одном дыхании посмотрел и муз сопровождение четкое
Muito top o trabalho. Quem é do Brasa da like.
Beatiful! Greetings from Southport UK.
Thanks :) Greetings from Poland :)
Es admirable el conocimiento que está en esa menta para hacer cosas tan geniales. Gracias por dejarme ver ese excelente trabajo
Very good restoration bro 🔥🔥🔥🔥👍👍👍👍👍
Thanks :)
Nice job, a couple of questions
a: What brand of lathe is it?
b: How long did the project take?
logo at 0:50 matches this brand:
MTP
I has results with this on google: Metal lathe MTP, same logo..
@@xl000 That's not the same lathe, he's using an MTP to polish up parts the other one, of which I would also like the know the brand lol.
It looks like an SN20A
@@anti4354 I think you're right, thanks!
AussieBlokeGordo would this help identify this engine lathe?
www.homemadetools.net/forum/lathe-restoration-sn20-68023
Nice job cleaning it up!
RL Buffalo, NY USA
Piękna robota!
WOW Bbeautiful JOB well done Man. Just Beautiful .....:)
Man, I wish I could do that. I would get it apart, cleaned up, put 1/4 of the way back together, and it would be that way for another three years and half the pieces would be lost.
Навести марафет это не восстановление....! В станке важна техническая часть! Если в нем убитые теже направляющие или шпиндель, то на нем только болты с гайками точить для заборов!
I study engineering, we work in practice on many machines including a lathe. We have several modern machines with electrical sensors in the school. It makes work much easier and more accurate. However, we still have machines in the school that are 50 years old in good condition. they are Czechoslovak production (now Czech Republic and Slovakia) so I think they will still be here for a long time. What I mean is that these machines are a piece of art. Just an electric motor and lots of metal parts ... it's amazing to work on it, it has its magic. Rely on your head and hands and not on your computer. Very well done renovation work, well served! But you should measure the machine geometry!!!
Thank you for reading and sorry for the English.
I measure the machine geometry it is fine :)
This mashine is Mas sn20a Czechosłovakia :)
Greetings from Poland :)
Awesome restoration.. looks better than new..👍🍀😁
Что то не увидел восстонавления станка...чистка, смазка, переборка, губы конечно станку покрасил хорошо....но где востонавление...в задней бабке пластины уже говорит о том что опущена она по уму бы расточить и ремонтную пиноль поставить...о геометрии направляющих вообще молчу один бог знает в каком она состоянии...а так вернее было бы назвать отделочно покрасочными работами
Ну вроде проточка длинного вала как бы намекает что направляющие более менее в порядке...
Сейчас стало трендово снимать видео по чистке и покраске станка и называть это восстановлением
Где в видео написано "восстановление"?
А вы на своём примере покажите как надо восстанавливать станок, или слабо ?)
@@user-tr5xp7ex8w я не ютубер...хочешь увидеть приезжай...адрес в личку могу скинуть...заодно хоть шаберок в руках подержишь
А у меня в гараже такой же стоит , молодец здорово жить помогал
Что за марка станка? У меня вроде этого, хочу инфу по нем найти.
Excellent teardown and rebuild.
Good job, Thank you for your information.
Я в школе на таком обучался. Спасибо СССР!
Модель не подскажите?
Спасибо надо говорить не ссср, а германии откуда была спизжена конструкция станка вплоть до самого маленького болтика.
@@Pavel-ir7hm Сейчас даже спиздить не можем...
Сергей Федоровских пять баллов, молодец;)
@@Pavel-ir7hm «Спасибо СССР» не за станок, а за то, что он был в школе (и не один). Теперь та в школу никто не поставит.
Ó canal ferreira motos ( torno caseiro) e apaixonado pela está máquina. ❤❤❤❤❤❤❤❤❤
Loads of work on this looks great 👍
Mateusz,Ну... Это не восстановление ,а ОЧИСТКА станка. У твоего станка техническое состояние ОТЛИЧНОЕ,
1.направляющие ты не восстанавливал
2.шестерни не менял ,
3.подшипники тоже ,
3.патрон ты только почистил от ржавчины,а не притирал ,
4.ходовой винт и маточная гайка в порядке ,
5.подачи работают ,
6.задняя бабка без люфта пиноли.
Что ещё надо?)
Ficou zerado 👏🏼😎🇧🇷 parabéns