Gerber does make their own adapter to go on this pattern of Phillips, it's comes in the "Gerber Tool Kit" which goes for about $20-$30 depending on where you look. Pretty nice fit, uses magnets instead of friction, though it's not quite deep enough to properly handle double-sided bits (a familiar Gerber flaw if you know the Center Drive).
I'm an auto tech and I got the Snappy several years ago. It's on my hip all day long at work, replaced a Leatherman Sidekick. It's kinda a backup tool I can use instead of running over to my box if I'm across the shop, outside or driving. 99% of the time I need the pliers, and Snap On's Talon Grip is the best. Never had an issue with them slipping. Easy one hand opening for the pliers. All the tools loosen up with use.
I recently bought this multi tool for under $179. I use it primarily at work. What sold it to me was my Snap-on dealer said Snap-on is putting their lifetime warranty behind it. He said if something on it breaks Snap-on swaps it out for a new one, if Gerber discontinues and it breaks, it I get upgraded to the new version.
The lifetime warranty is really what sold it for me, too. It's expensive, and great multi tools can be bought for less but not with that snap on guarantee. I've had mine since it came out and have already swapped out the first one. I can neither confirm nor deny that the file was used as a pry tool and snapped in half. Snap on dealer swapped it out no questions asked
Considering you can buy 5 of this tool that has no Snap-On printed on it, lifetime warranty doesn't sound like a great deal for me. Buy the non -snap-on one, if it breaks, buy a new one. And then again, a new one. At this point you will be at 50% of the cost.
as a mechanic of 15 plus years i got one of these when they first came out. they werent 200$ lol, i believe i paid like 140-150$. i see what your saying bout the squeeze, but what i notice compared to other multi tools is snap on ones have no gap in the grip face of plier when closed. as far as the tightness of tool use it for a week or 2 and itll be normal. and the last thing is the snap on warranty follows the tool.
In my possibly not so humble opinion, the first, and most inexplicably egregious mistake Snap-On made was in going to Gerber instead of Leatherman, on the one hand, and deciding to go OTF, on the other hand. Up to now, we have associated "Snap-On" with the very finest quality tools; no more. And Gerger's OTF design makes all the other tools smaller and less efficient in function. Then, too, I would have hoped that a Snap-On multitool would have included something innovative yet immensely practical in a multi-tool with their imprimatur - something that would have Victorinox, Gerber, Leatherman, SOG, et al. smacking their foreheads and saying "OMG, why didn't WE think of that?" Instead, what did they give us? A drastically overpriced red Gerber in a red Gerber sheath; and not even the best design of a Gerber. WHAT THE HECK WERE THEY THINKING????
Honestly just got the snap-on version... Honest opinion is that, while the SMT97R is a great tool, i had to use a dremel on the mid-size phillips to get the tool to close properly which is something I've never encountered with any other MP600 or Diesel. Like he said replace the cutters with the HSS cutters and that will solve so many problems and frustrations. Honest opinion: good tool... But if you need a tool set similar to this buy the MP600 bladeless for about 1/3 the price and frankly i like it much better.
Gr8 vid, don't know why even a mobile mechanic would want that tool. At home I have at least 25 pliers, vice grips etc and reach for the one that fits the job as closely as possible. Doing construction or EDC is where these tools make sense as the best tool is the one you have immediate access to.
As a former shop based mechanic and current mobile mechanic who's owned this tool since it was introduced, I can say I love it. As with any multi tool, it comes in very handy. Even though my tool box is full of the "rigjt tools for the job" when your in the middle of something under the dash or on your back under the car as any mechanic knows you don't always reach for the "right tool" or have the luxury of doing so. You grab what you can get easily and quickly. This is why having this or any multi tool for that matter is so clutch for mechanics. We're known for turning ratchets into hammers and screwdrivers into prybars. We definitely don't always grab the "right tool"
Thank you for mentioning the leatherman removable bit driver. Work got me this and had no idea that would work with it. Just ordered three for me and the guys I work with.
What a great, well thought out video. I have the Center Drive and absolutely love it. I nearly grabbed an SMT97R used but I couldn’t get past the fact you had to open the tool right up to use anything. I was almost tempted to buy it (lightly used) to see if I could put the plier head on my CD as a lot of my pliers have the Snap On “Talon Grip” feature and it’s pretty legendary IMO
One reason why i use the MP600 and Diesel over the centerdrive is that they don't have spring pliers and i can leave the phillips/straight while using the pliers which is great in electrical.
Bladeless MP is one of the best tools out light, great pliers, plus scissors and a saw perfect with a main blade or standalone it is future proof and even now can be taken where no bladed tools can. Upgrades needed are Gerber producing and selling a range of t-shank tools (they have the market cornered) and alternate cutters perhaps a pocket clip stamped out. All fixes keep weight/size as is.
Have you experienced the tool clearance issue with the pliers and thin material yourself? Would have been nice to see it demonstrated. It hasn't been a problem for me and I wonder if in practice it isn't as big of an issue as the internet makes it seem. I picked up a used one for $70 Canadian and I'm happy with it for that price. $200 US is crazy steep and not worth it IMO. Mine was nice and loose when it got to me so I imagine with time yours will loosen up as well. Great channel!
Snap-on & Gerber are basically Cousins from a different mother. They're good tools but always in some cases have flaws either in design or quality in durability etc. Nevertheless on occasion they do give the rest a run for their worth. It would be great if the tools are accessible from the outside. Great insight maestro.!
Tools on the outside of the handle would be nice for the easy access but any prolonged use of the pliers without gloves on might hurt my delicate baby hands😂
In my circumstances so far, I've never needed to use my Center Drive tool with very thin material that poses a clearance issue with the pliers. It's always been chosen for 'chunky' use such as bolt heads, thicker materials and the like. I wonder if the plier clearance is a real issue or a special case scenario in real world use?
Totally worth the price... If you're a Snap On fanboy 😂 In all seriousness though why would a mechanic need those when they have a full set of real tools?
As a former shop based mechanic and current mobile mechanic who's owned this tool since it was introduced, I can say I love it. As with any multi tool, it comes in very handy. Even though my tool box is full of the "rigjt tools for the job" when your in the middle of something under the dash or on your back under the car as any mechanic knows you don't always reach for the "right tool" or have the luxury of doing so. You grab what you can get easily and quickly. This is why having this or any multi tool for that matter is so clutch for mechanics. We're known for turning ratchets into hammers and screwdrivers into prybars. We definitely don't always grab the "right tool"
I love the cutter is awesome for a tech strip wires with ease also they are tight but don’t flex like others 3 years of use or more definitely my go to
Something that needs to be more known about gerbers multitools is the locks aren’t plastic. This is such a common misconception and I don’t understand how because all you have to do is look. There is a metal plate underneath the plastic tabs that come in contact with the back of the tools. The plastic parts are just for grip. It’s a solid lock.
I’m with you. The black blunt nose mp600 is best ever. How could they still be using that carbide pos blade? 90 percent of my use is pliers and the fast one hand deploy is my goto. They are getting harder to find though.
I had one of these Gerber tools, got it for about 50 bucks, pretty much got it for the scissors for my uniforms. The scissors were brokenwhen I opened it, always snapped open after every use. Broke the file off a few months later and noticed how cheap the material was, didn't even look like metal smh.
I’d love to see details about those 4” Snap On slip joint pliers you’ve shown. I’m intrigued by the wire cutter… I know it’s small, but it would still be quite handy if it can cut hard wire.
I bought one of these and when I heard the price of this it brought back memory of how stupid I used to be lol. I will have to break them out cause I do need some wire cutters and crimpers for a daily carry as you said being a mechanic.
Like detective Columbo... (Turning back to ask) Just one more thing, who else still has their old pop metal Gerber disassembly wrench(s) ? So nice when you mix & match, more so when you customize accessories that you put back in.
Right out of the gate it looks just like my favorite Gerber mp600 but I'll obviously watch the whole video haha it better be something real fancy for $200! Also I mad emy son a multiforce pocket knife with all the good stuff hahaha 🤣 I gave it too him today he loves it!
Gerber, like SOG, used to make fine knives, popular with military people. I got my Gerber Mark I and Mark II 4 decades ago when I was in the army. However, they have gone for the cheapest manufacturer and had knives and assorted edged tools made in China by the lowest bidder. I have been disappointed by SOG and will probably be disappointed by Gerber as well.
Gave up on Gerber long ago. Gerber Gator left me looking for where the broken serrated tip was lost in my apple... the apple I had eaten half of already. Gerber multi tools, broke multiple plier heads along the side, too fidgety for tools inside, grit in the slide becomes annoying. Small multis broke repeatedly. Best one I ever had was the Flick-Fish and its discontinued long ago. Pocket folder broke in the first use as a gift to my sister. Fixed blade broke second use on a backpacking trip, leaving me with half a knife and nearly put my eye out. I want to like Gerber but I'm done giving them any more chances. SOG used to pretty good but the quality went down hill after the 90's then more recently tried one of there small pocketable multitools and realized they really raised there game. I'm excited to see if SOG keeps up the quality and what they do with it.
Great video as always. I own the tool and love it and dont necessarily agree with everything you said but still love the content. Btw gerber does make there own bit set. Pretty readily available. I own that kit as well as an add on to my smt97r
I rather it be tight 😉than loose, know what I mean? For the price not sure how good this multi-tool would be and I wonder if this will be covered by the warranty as other SnapOn tools. I just dont get why not make the tool with a standard 1/4" bit holder whereas now if I want something better I have to carry some bit adapter and possibly lose it. Great review👍! Kudos from NYC🗽.
Tightness, quality aside, the number of tools seem about right. I'm a bit of an odd duck so I'd have liked to see scissors as a tool, but that's just my hang up. I think the fatal flaw for me (surprisingly it's not the price-more on that in a moment) is that the tools aren't outside accessable. The video mentioned this but I don't think this could be emphasized enough.As far as the price goes, it's about right Snap on is pro tools. The quality isn't even the issue most of time (although I would say the quality is mostly on the very good side mostly). It's the warranty. It's Stoopid easy to get another tool when the last one is damaged. I've gone up to a snap on tool truck/retailer and when they had the tool on board they just swapped it out for me. That's why it's 15-20 bucks for a screwdriver and why this tool is 200.
First of all, love the vid with the add in text jokes. It's amazing that regardless of what we've gone through and put up with in this would that many if not most of us never really grow past 14y/o.. Cause even if we've moved into 'dad joke' territory being a father or not, yes, we still 'go there' with the jokes. Secondly, no I'm not a mechanic but I do personally know several and know that they do love their Snap-On tools but personally, No, it's not worth an addition $100 just to have 'Snap-On' pasted onto the side of it. Outside of Brand Loyalties of certain mechanics and the like I feel that rebranding tools with "Such & Such Edition" in order to make an extra $Buck or 100 of them is just wrong. Again, just my personal opinion and we all know what they say about those. I started off using a lot of my Father's tools (He was the lead of a local Street Dept) that he used fixing equipment at work and vehicles at home. They tended to be a bit of everything as you used what you could get from a cheap Local Government including promotional freebies from tool salesmen. And then on the other side of the family was and is my Grandfathers tools. He was a welder and sometimes general repair at what is now a vey old traditional coal fired powerplant on the Ohio River. They were and still are Union worked and as so often when owned by a major power company they will spend money unnecessarily often buying high dollar tools for a singular specific job, use them a couple of times and then write them off as a cost of business which at that point the workers would take and use the tools at home since the tool was no longer 'on the books' at the company. Because of this, I've used JH Williams & Co as well as Proto who owns them now, Snap-On and several other 'smaller' companies that Snap-on now owns, also Stanley / Black and Decker, and Craftsman from premerger times. All of them have worked quite well because they were well made 'Made in America' products. The term "They just don't make them like they used too" comes to mind and since I'm cheap, I prefer to purchase used old tools that are still in decent to great shape and restore them if need be. But each to their own. Use what you like and can afford.
As Billie Jean King said, years ago ….. Some Snap-on Tools are better than others! Snap-on definitely needs to go back and rewrite their product specification for the tool and resubmit it to Gerber!
LMAO I've got a supervisor who probably pay almost double, if it says, "Milwaukee Fuel" Joking aside, Some of the guys in the shop wouldn't doubt if his wife's throw pillows have the Milwaukee logo.
I hope they get there blade steel straight, I've had five center drives and the tip has snapped on every single one. I kept buying them because i liked the design and Gerber is one of my favorite knife makers. But eff i figured the first time i misused it, so i got a second...and it snapped, then a third snapped as well and at that point they lost me.
@@maxlvledc slicing with the tip, nothing crazy, plastic sheet, notching wood, marking drywall.... things you would do with a knife! Not prying, not lifting paint lids. I don't know if they had a bad run or something and I got them all or if there is a strong knockoff market. It was from different dealers, different times of year....i have no idea on what was going on. Never before had I had such trouble. I take pretty good care of my tools, they're....my tools I need them, it got ridiculous.
It's not like I was doing it on concrete, steel or some hard backing either. Just boop there goes the tip of the blade... Gerber had been my goto since I was a kid and they sadly lost me...
Seems too expensive to begin with, regardless of some of those issues. $222 usd on the snap on site - $300 cad? I would rather buy a Leatherman Charge+TTI for $256cad. I do think it would be cool to see a new iteration/update of Gerbers multitools though.
In EU Leatherman Charge Titanium cost aroind 270€ wic is stupid expensive. And for 145€ ewryone can buy Victorinox Spirit MX . And it is on another lewel with Leatherman and Herber tools.
I have an almost identical Gerber from probably 20 years ago that was maybe 45 bucks. Doesn't seem like Gerber is going much in the innovation side of things
I used to be a very big Gerber supporter. I've had many of their multi tools and a good handful of their knives. I liked the feel of the handles over Leatherman's. Then the Wave came out and someone gave me one and I never went back. I'm now on my 3rd Leatherman and I can't live without my Surge... Which is unfortunately out for warranty repair currently.
@@benwilletts6862 I could see that. I've got big hands though and I use mine every day at work doing property maintenance so the heavier duty the better. I just recently snapped the jaw on mine trying to bend a piece of metal and I'm waiting to hear back from leather if they'll warranty it. I did enjoy my wave, it was better as an EDC, but sadly I snapped that one at the hinge. I'm kind of hard on things I guess.
@@Steam_Engenius I’d recommend the surge too. If your heavy handed maybe a better option for you mate. The surge works good with people with big hands. 👍🏻
I most certainly do NOT think you were way of base in your commentary on this tool. To extend the baseball analogy, this tool coming from Snap-On is like Babe Ruth coming to the plate for the Yankees when they are down a run against the Red Sox. The Beantown hurler leaves a fat, juicy change-up hanging over the center of the plate, and the Sultan of Swat, with a mighty swing trickles a nubber down the 3rd base line that he is barely able to leg-out for an infield single. I think this particular Snap-On is red only from embarrassment.
"it's worth $200 because it's an 'investment' " Here I am making fun of Snap On when I'm eyeballing the Swisstool at almost the same price and I know full well I can get most that function for $40. 😅
Not necessarily. The Swisstool is the absolute best in terms of workmanship and resistance that I have owned so far. I collected everything from SOG to Leatherman to Victorinox... I have a leatherman squirt with me in everyday life, it does everything what I need in society. But when I go off the beaten paths, and I need a single tool on my I can 100% rely on, its always the Swisstool!
I'll stick with my center drive. That's a lot of money for basically a gerber mp 600. There is nothing about that tool that puts it in the $200 dollar range. Oh! im sorry it says snap on, so it's totally worth it. lol I'm a mechanic and wouldn't go near that thing. Of course, I don't have a snap on truck stopping by every week .i can see people grabbing it off the truck and paying $25 bucks a week just because they can .
I sure hope mechanics aren’t using these tools to work on cars. The right tool for the job. I always thought multi tools should be used for emergencies , or when you are out on the road , or back country
As a former shop based mechanic and current mobile mechanic who's owned this tool since it was introduced, I can say I love it. As with any multi tool, it comes in very handy. Even though my tool box is full of the "rigjt tools for the job" when your in the middle of something under the dash or on your back under the car as any mechanic knows you don't always reach for the "right tool" or have the luxury of doing so. You grab what you can get easily and quickly. This is why having this or any multi tool for that matter is so clutch for mechanics. We're known for turning ratchets into hammers and screwdrivers into prybars. We definitely don't always grab the "right tool." So yes, "real" mechanics are really using these in a pinch. Any "real" mechanic with a full set of "real" tools will tell that we frequently grab what's closest and having this tool or any multi tool on our hips allows us to grab a "real" tool albeit not the "right" tool to get the job done
If you bought a $65 ratchet wrench that was so tight that you needed to strip it down and lubricate everything so it works normally, would you think it was a good tool? This thing is $200…
That looks like a cheap maybe if I'm generous 20$ Walmart multitool. Actually hilarious this is even a product. In another timeline somewhere they made a deal with Leatherman and the multitool is immaculate but in this timeline we get this abomination.
A snap on rebrand of a gerber product sounds like the worst of both worlds tbh
Funny. I agree with that though.
Only plus is the DLC/Ceracoat may actually protect that Chinese pot-metal 5cr13mov steel this overpriced trash uses.. two thumbs down.
It is overpriced at 1/5 the cost.
Agreed' Nothing like paying $100 extra just for a name..
Victorinox premium for Gerber quality
My dad has had one on his side for like 3 years he hasn’t had a problem with it he works on cars everyday works perfectly
Gerber does make their own adapter to go on this pattern of Phillips, it's comes in the "Gerber Tool Kit" which goes for about $20-$30 depending on where you look. Pretty nice fit, uses magnets instead of friction, though it's not quite deep enough to properly handle double-sided bits (a familiar Gerber flaw if you know the Center Drive).
leatherman micro bits and mini bits arent that useful. ill stick to a normal bit driver
I'm an auto tech and I got the Snappy several years ago. It's on my hip all day long at work, replaced a Leatherman Sidekick. It's kinda a backup tool I can use instead of running over to my box if I'm across the shop, outside or driving. 99% of the time I need the pliers, and Snap On's Talon Grip is the best. Never had an issue with them slipping. Easy one hand opening for the pliers.
All the tools loosen up with use.
Cmon 😂
Same. I got it off the truck when it came out, and it hasn't left my hip since then. It's been years at this point. I think it's a great tool
I recently bought this multi tool for under $179. I use it primarily at work. What sold it to me was my Snap-on dealer said Snap-on is putting their lifetime warranty behind it. He said if something on it breaks Snap-on swaps it out for a new one, if Gerber discontinues and it breaks, it I get upgraded to the new version.
The lifetime warranty is really what sold it for me, too. It's expensive, and great multi tools can be bought for less but not with that snap on guarantee. I've had mine since it came out and have already swapped out the first one. I can neither confirm nor deny that the file was used as a pry tool and snapped in half. Snap on dealer swapped it out no questions asked
Considering you can buy 5 of this tool that has no Snap-On printed on it, lifetime warranty doesn't sound like a great deal for me. Buy the non -snap-on one, if it breaks, buy a new one. And then again, a new one. At this point you will be at 50% of the cost.
as a mechanic of 15 plus years i got one of these when they first came out. they werent 200$ lol, i believe i paid like 140-150$. i see what your saying bout the squeeze, but what i notice compared to other multi tools is snap on ones have no gap in the grip face of plier when closed. as far as the tightness of tool use it for a week or 2 and itll be normal. and the last thing is the snap on warranty follows the tool.
Looks just like my $30 Gerber mp600.
But but it is red and says snap on😊
In my possibly not so humble opinion, the first, and most inexplicably egregious mistake Snap-On made was in going to Gerber instead of Leatherman, on the one hand, and deciding to go OTF, on the other hand. Up to now, we have associated "Snap-On" with the very finest quality tools; no more. And Gerger's OTF design makes all the other tools smaller and less efficient in function.
Then, too, I would have hoped that a Snap-On multitool would have included something innovative yet immensely practical in a multi-tool with their imprimatur - something that would have Victorinox, Gerber, Leatherman, SOG, et al. smacking their foreheads and saying "OMG, why didn't WE think of that?"
Instead, what did they give us? A drastically overpriced red Gerber in a red Gerber sheath; and not even the best design of a Gerber. WHAT THE HECK WERE THEY THINKING????
That red paint jams up all the tolerances alright - they got us good!
Honestly just got the snap-on version... Honest opinion is that, while the SMT97R is a great tool, i had to use a dremel on the mid-size phillips to get the tool to close properly which is something I've never encountered with any other MP600 or Diesel. Like he said replace the cutters with the HSS cutters and that will solve so many problems and frustrations. Honest opinion: good tool... But if you need a tool set similar to this buy the MP600 bladeless for about 1/3 the price and frankly i like it much better.
Gr8 vid, don't know why even a mobile mechanic would want that tool. At home I have at least 25 pliers, vice grips etc and reach for the one that fits the job as closely as possible. Doing construction or EDC is where these tools make sense as the best tool is the one you have immediate access to.
Or just wear a tool pouch with what you might need for the day.
As a former shop based mechanic and current mobile mechanic who's owned this tool since it was introduced, I can say I love it. As with any multi tool, it comes in very handy. Even though my tool box is full of the "rigjt tools for the job" when your in the middle of something under the dash or on your back under the car as any mechanic knows you don't always reach for the "right tool" or have the luxury of doing so. You grab what you can get easily and quickly. This is why having this or any multi tool for that matter is so clutch for mechanics. We're known for turning ratchets into hammers and screwdrivers into prybars. We definitely don't always grab the "right tool"
Thank you for mentioning the leatherman removable bit driver. Work got me this and had no idea that would work with it. Just ordered three for me and the guys I work with.
What a great, well thought out video.
I have the Center Drive and absolutely love it. I nearly grabbed an SMT97R used but I couldn’t get past the fact you had to open the tool right up to use anything.
I was almost tempted to buy it (lightly used) to see if I could put the plier head on my CD as a lot of my pliers have the Snap On “Talon Grip” feature and it’s pretty legendary IMO
One reason why i use the MP600 and Diesel over the centerdrive is that they don't have spring pliers and i can leave the phillips/straight while using the pliers which is great in electrical.
Hmm, interesting point!
Bladeless MP is one of the best tools out light, great pliers, plus scissors and a saw perfect with a main blade or standalone it is future proof and even now can be taken where no bladed tools can.
Upgrades needed are Gerber producing and selling a range of t-shank tools (they have the market cornered) and alternate cutters perhaps a pocket clip stamped out. All fixes keep weight/size as is.
Have you experienced the tool clearance issue with the pliers and thin material yourself? Would have been nice to see it demonstrated. It hasn't been a problem for me and I wonder if in practice it isn't as big of an issue as the internet makes it seem. I picked up a used one for $70 Canadian and I'm happy with it for that price. $200 US is crazy steep and not worth it IMO. Mine was nice and loose when it got to me so I imagine with time yours will loosen up as well. Great channel!
no way , that design crush your fingers
For $200 that thing better come with a brushless drill, a 2 amp 18 volt battery, and a charging station.
Snap-on & Gerber are basically Cousins from a different mother. They're good tools but always in some cases have flaws either in design or quality in durability etc. Nevertheless on occasion they do give the rest a run for their worth. It would be great if the tools are accessible from the outside. Great insight maestro.!
Tools on the outside of the handle would be nice for the easy access but any prolonged use of the pliers without gloves on might hurt my delicate baby hands😂
Well, have to say, the color is beautiful 😊
Just retired my MP FOR A LEATHERMAN OHT glad I did too and I can use my gerber toolkit with it too.
In my circumstances so far, I've never needed to use my Center Drive tool with very thin material that poses a clearance issue with the pliers. It's always been chosen for 'chunky' use such as bolt heads, thicker materials and the like. I wonder if the plier clearance is a real issue or a special case scenario in real world use?
Totally worth the price...
If you're a Snap On fanboy 😂
In all seriousness though why would a mechanic need those when they have a full set of real tools?
I'm a snap-on fanboy and I wouldn't buy it for $30. Gerber hasn't made a quality tool since the 90s. Fragile blade and crappy steel.
As a former shop based mechanic and current mobile mechanic who's owned this tool since it was introduced, I can say I love it. As with any multi tool, it comes in very handy. Even though my tool box is full of the "rigjt tools for the job" when your in the middle of something under the dash or on your back under the car as any mechanic knows you don't always reach for the "right tool" or have the luxury of doing so. You grab what you can get easily and quickly. This is why having this or any multi tool for that matter is so clutch for mechanics. We're known for turning ratchets into hammers and screwdrivers into prybars. We definitely don't always grab the "right tool"
I love the cutter is awesome for a tech strip wires with ease also they are tight but don’t flex like others 3 years of use or more definitely my go to
Something that needs to be more known about gerbers multitools is the locks aren’t plastic. This is such a common misconception and I don’t understand how because all you have to do is look. There is a metal plate underneath the plastic tabs that come in contact with the back of the tools. The plastic parts are just for grip. It’s a solid lock.
He said plastic on the outside 1:50
What model is the black gerber that he compares in the beginning? It has an extended Philips Screwdriver. My mp600 has a nub.
I’m with you. The black blunt nose mp600 is best ever. How could they still be using that carbide pos blade? 90 percent of my use is pliers and the fast one hand deploy is my goto. They are getting harder to find though.
I had one of these Gerber tools, got it for about 50 bucks, pretty much got it for the scissors for my uniforms. The scissors were brokenwhen I opened it, always snapped open after every use. Broke the file off a few months later and noticed how cheap the material was, didn't even look like metal smh.
If snap on made a version of the Gerber center drive I would totally buy it
But where do you get the remgrit blades for it? Cant find them anywhere
I’d love to see details about those 4” Snap On slip joint pliers you’ve shown. I’m intrigued by the wire cutter… I know it’s small, but it would still be quite handy if it can cut hard wire.
I bought one of these and when I heard the price of this it brought back memory of how stupid I used to be lol. I will have to break them out cause I do need some wire cutters and crimpers for a daily carry as you said being a mechanic.
Like detective Columbo...
(Turning back to ask)
Just one more thing,
who else still has their old pop metal
Gerber disassembly wrench(s) ?
So nice when you mix & match,
more so when you customize
accessories that you put back in.
Right out of the gate it looks just like my favorite Gerber mp600 but I'll obviously watch the whole video haha it better be something real fancy for $200!
Also I mad emy son a multiforce pocket knife with all the good stuff hahaha 🤣 I gave it too him today he loves it!
A snap on flik would. Be sweet! With the color combo and outside tools.
Well done. Beautiful job as always 👏👏
Gerber, like SOG, used to make fine knives, popular with military people. I got my Gerber Mark I and Mark II 4 decades ago when I was in the army. However, they have gone for the cheapest manufacturer and had knives and assorted edged tools made in China by the lowest bidder. I have been disappointed by SOG and will probably be disappointed by Gerber as well.
Gave up on Gerber long ago. Gerber Gator left me looking for where the broken serrated tip was lost in my apple... the apple I had eaten half of already. Gerber multi tools, broke multiple plier heads along the side, too fidgety for tools inside, grit in the slide becomes annoying. Small multis broke repeatedly. Best one I ever had was the Flick-Fish and its discontinued long ago. Pocket folder broke in the first use as a gift to my sister. Fixed blade broke second use on a backpacking trip, leaving me with half a knife and nearly put my eye out. I want to like Gerber but I'm done giving them any more chances. SOG used to pretty good but the quality went down hill after the 90's then more recently tried one of there small pocketable multitools and realized they really raised there game. I'm excited to see if SOG keeps up the quality and what they do with it.
You can use the same technique of the Center-Drive to fix the plier issue on the Snap-On. When you want to use the pliers, just have the blade out. :D
Eeek...your not wrong, but too dangerous
It's got that snap-on gold primer baby! 125 dollars worth. That red paint is pretty expensive as well
Needing can opener , where to find can opener urgenly for this tool
I had a Gerber of this type and gave it away. Hated it
Looks like a $75 tool to me. Thanks for the video
Great video as always. I own the tool and love it and dont necessarily agree with everything you said but still love the content. Btw gerber does make there own bit set. Pretty readily available. I own that kit as well as an add on to my smt97r
What is you’re opinion on the leatherman rebar
Excellent
I rather it be tight 😉than loose, know what I mean? For the price not sure how good this multi-tool would be and I wonder if this will be covered by the warranty as other SnapOn tools. I just dont get why not make the tool with a standard 1/4" bit holder whereas now if I want something better I have to carry some bit adapter and possibly lose it. Great review👍! Kudos from NYC🗽.
The issue you brought up with this having no space to down on small pieces of metal is the same in the roxon s802 with the utility blade... blade.
I head that as well, thankfully only the utility knife has that problem..looks like it would be relatively easy to grind it down too.
Tightness, quality aside, the number of tools seem about right. I'm a bit of an odd duck so I'd have liked to see scissors as a tool, but that's just my hang up. I think the fatal flaw for me (surprisingly it's not the price-more on that in a moment) is that the tools aren't outside accessable. The video mentioned this but I don't think this could be emphasized enough.As far as the price goes, it's about right Snap on is pro tools. The quality isn't even the issue most of time (although I would say the quality is mostly on the very good side mostly). It's the warranty. It's Stoopid easy to get another tool when the last one is damaged. I've gone up to a snap on tool truck/retailer and when they had the tool on board they just swapped it out for me. That's why it's 15-20 bucks for a screwdriver and why this tool is 200.
I keep an open Gerber 600 on my desk. I never close it so if I need a pliers, they're right there...
First of all, love the vid with the add in text jokes. It's amazing that regardless of what we've gone through and put up with in this would that many if not most of us never really grow past 14y/o.. Cause even if we've moved into 'dad joke' territory being a father or not, yes, we still 'go there' with the jokes.
Secondly, no I'm not a mechanic but I do personally know several and know that they do love their Snap-On tools but personally, No, it's not worth an addition $100 just to have 'Snap-On' pasted onto the side of it. Outside of Brand Loyalties of certain mechanics and the like I feel that rebranding tools with "Such & Such Edition" in order to make an extra $Buck or 100 of them is just wrong. Again, just my personal opinion and we all know what they say about those.
I started off using a lot of my Father's tools (He was the lead of a local Street Dept) that he used fixing equipment at work and vehicles at home. They tended to be a bit of everything as you used what you could get from a cheap Local Government including promotional freebies from tool salesmen. And then on the other side of the family was and is my Grandfathers tools. He was a welder and sometimes general repair at what is now a vey old traditional coal fired powerplant on the Ohio River. They were and still are Union worked and as so often when owned by a major power company they will spend money unnecessarily often buying high dollar tools for a singular specific job, use them a couple of times and then write them off as a cost of business which at that point the workers would take and use the tools at home since the tool was no longer 'on the books' at the company. Because of this, I've used JH Williams & Co as well as Proto who owns them now, Snap-On and several other 'smaller' companies that Snap-on now owns, also Stanley / Black and Decker, and Craftsman from premerger times. All of them have worked quite well because they were well made 'Made in America' products. The term "They just don't make them like they used too" comes to mind and since I'm cheap, I prefer to purchase used old tools that are still in decent to great shape and restore them if need be.
But each to their own. Use what you like and can afford.
As Billie Jean King said, years ago ….. Some Snap-on Tools are better than others! Snap-on definitely needs to go back and rewrite their product specification for the tool and resubmit it to Gerber!
The should have just went with Leatherman or showed good sense and taste with Victoronox SwissTool.
Billie jean king the tennis player? Was it an ad or something?
I think that Leatherman is the best product
Those are U shank jigsaw blades, common on diy jigsaws.
I would pay $200 if it is labeled Supreme instead of Snap-on
LMAO
I've got a supervisor who probably
pay almost double, if it says,
"Milwaukee Fuel"
Joking aside,
Some of the guys in the shop wouldn't doubt if his wife's
throw pillows have the
Milwaukee logo.
I can't dislike that statement enough
I hope they get there blade steel straight, I've had five center drives and the tip has snapped on every single one. I kept buying them because i liked the design and Gerber is one of my favorite knife makers. But eff i figured the first time i misused it, so i got a second...and it snapped, then a third snapped as well and at that point they lost me.
What the heck are you doing that would cause a blade to snap???
@@maxlvledc slicing with the tip, nothing crazy, plastic sheet, notching wood, marking drywall.... things you would do with a knife! Not prying, not lifting paint lids. I don't know if they had a bad run or something and I got them all or if there is a strong knockoff market. It was from different dealers, different times of year....i have no idea on what was going on. Never before had I had such trouble. I take pretty good care of my tools, they're....my tools I need them, it got ridiculous.
It's not like I was doing it on concrete, steel or some hard backing either. Just boop there goes the tip of the blade... Gerber had been my goto since I was a kid and they sadly lost me...
@@maxlvledc Lol I was going to ask the same thing! "oh just changing the fillings out..." on my pet diamond?
@@imadoggggggg now I definitely need to test this...
Multitools like this stop me in my tracks from any dissing on Leatherman.
Seems too expensive to begin with, regardless of some of those issues. $222 usd on the snap on site - $300 cad? I would rather buy a Leatherman Charge+TTI for $256cad.
I do think it would be cool to see a new iteration/update of Gerbers multitools though.
I saw this on the truck and would've bought it for Snappy Vibes if it were a real Center-Drive
What’s a screw plier?
I did a video on them about removing the Leatherman proprietary screws a while back.
In EU Leatherman Charge Titanium cost aroind 270€ wic is stupid expensive. And for 145€ ewryone can buy Victorinox Spirit MX . And it is on another lewel with Leatherman and Herber tools.
The most wonderful blogger ! I 'm always waiting for new videos ! There is a similar one in Europe . This is Diezelle57
Suprised they didn't go with a real company and the originators of the multi-tool.
Leatherman always been the best.
I've got a few of these original gerbers for fishing cause of the 1 handed operation.. I did NOT pay even half of this for them
I have an almost identical Gerber from probably 20 years ago that was maybe 45 bucks. Doesn't seem like Gerber is going much in the innovation side of things
I have like 6 stainless and black military 75. Ucks with case. Fack snap on!
Really very nice >>>>>>> Thank you
I bought these when they first came out... If the cutters were actually any good maybe then they'd be worth it
it's three times the cost of a mp600 bladeless, the only difference is it has a knife. you could spend $20 on a good knife and save the other $120
Get yourself a Leatherman mate. 😊
I used to be a very big Gerber supporter. I've had many of their multi tools and a good handful of their knives. I liked the feel of the handles over Leatherman's. Then the Wave came out and someone gave me one and I never went back. I'm now on my 3rd Leatherman and I can't live without my Surge... Which is unfortunately out for warranty repair currently.
@@Steam_Engenius i find the surge a little heavy and big. I have one and it’s my definitely go to tool. But stick to my wave every time
@@benwilletts6862 I could see that. I've got big hands though and I use mine every day at work doing property maintenance so the heavier duty the better. I just recently snapped the jaw on mine trying to bend a piece of metal and I'm waiting to hear back from leather if they'll warranty it. I did enjoy my wave, it was better as an EDC, but sadly I snapped that one at the hinge. I'm kind of hard on things I guess.
@@Steam_Engenius I’d recommend the surge too. If your heavy handed maybe a better option for you mate. The surge works good with people with big hands. 👍🏻
When you *REALLLY* want a red and black multi-tool. Feels like Powdercoating Is a cheaper option
$200? No thanks, saving up for the Leatherman Arc. Whenever that actually shows up.
I learned early that snapon tools are overrated and overpriced. That knowledge has saved me a lot of money.
I wish Vampliers would make a multi-tool.
I most certainly do NOT think you were way of base in your commentary on this tool. To extend the baseball analogy, this tool coming from Snap-On is like Babe Ruth coming to the plate for the Yankees when they are down a run against the Red Sox. The Beantown hurler leaves a fat, juicy change-up hanging over the center of the plate, and the Sultan of Swat, with a mighty swing trickles a nubber down the 3rd base line that he is barely able to leg-out for an infield single.
I think this particular Snap-On is red only from embarrassment.
Is it usa made?
Yes
thanks
so snap-on put there name and some red paint on a mp600 . and that's worth 160 dollars more?
That's a Gerber multiplier I use it all the time, I think I paid like $40 for it
"it's worth $200 because it's an 'investment' "
Here I am making fun of Snap On when I'm eyeballing the Swisstool at almost the same price and I know full well I can get most that function for $40. 😅
Leatherman free p4 has been my go to for the past couple years, but that’s also $140
Not necessarily. The Swisstool is the absolute best in terms of workmanship and resistance that I have owned so far. I collected everything from SOG to Leatherman to Victorinox... I have a leatherman squirt with me in everyday life, it does everything what I need in society. But when I go off the beaten paths, and I need a single tool on my I can 100% rely on, its always the Swisstool!
have you looked at real avid multitools? They are for guns but look like they have interesting tools in them.
I've seen em
Betteridge's law of headlines
I still have the original made in US Gerber.
Big flaw is the handles pinching when crankin' down hard cutting thick wire.
Why would snapon choose Gerber over leatherman
I'll stick with my center drive. That's a lot of money for basically a gerber mp 600. There is nothing about that tool that puts it in the $200 dollar range. Oh! im sorry it says snap on, so it's totally worth it. lol I'm a mechanic and wouldn't go near that thing. Of course, I don't have a snap on truck stopping by every week .i can see people grabbing it off the truck and paying $25 bucks a week just because they can .
I think your making the right choice
I feel like you just go to a military surplus store and get a gerber mp600 for like $40.
I know how to fix the gerber snap on, buy a Leatherman Wave. Right size, right tools.
Lol Snap On will try anything to get that extra cash off the fan boys.
$200 get real ?
They should have just painted a Leatherman Charge red.
OR...
Upgraded the steel on the Surge.
Might as well be paying for something besides the name.
Better off with a custom Leatherman Surge at that price
No just go buy the Gerber version and it'll be cheaper. That's a good multi tool though
I sure hope mechanics aren’t using these tools to work on cars. The right tool for the job.
I always thought multi tools should be used for emergencies , or when you are out on the road , or back country
As a former shop based mechanic and current mobile mechanic who's owned this tool since it was introduced, I can say I love it. As with any multi tool, it comes in very handy. Even though my tool box is full of the "rigjt tools for the job" when your in the middle of something under the dash or on your back under the car as any mechanic knows you don't always reach for the "right tool" or have the luxury of doing so. You grab what you can get easily and quickly. This is why having this or any multi tool for that matter is so clutch for mechanics. We're known for turning ratchets into hammers and screwdrivers into prybars. We definitely don't always grab the "right tool." So yes, "real" mechanics are really using these in a pinch. Any "real" mechanic with a full set of "real" tools will tell that we frequently grab what's closest and having this tool or any multi tool on our hips allows us to grab a "real" tool albeit not the "right" tool to get the job done
What in a name? Apparently $200 for a less capable tool. Thanks for sharing!
👍. Across all tools I’d rather they were tight new.🤔
This just goes to show that there's people out there that'll pay stupid money, simply because it say Snap-on.
Only 9.99 a month for life from the snap-on van 😂
Get a Leatherman surge. Snap on tax is stupid
If you bought a $65 ratchet wrench that was so tight that you needed to strip it down and lubricate everything so it works normally, would you think it was a good tool?
This thing is $200…
Yep, basically.
Jesus their are some things you just do not buy from a tool truck . And this is just 1 of them .
with a price like that.. it should be called strap-on! 🤣
That looks like a cheap maybe if I'm generous 20$ Walmart multitool. Actually hilarious this is even a product. In another timeline somewhere they made a deal with Leatherman and the multitool is immaculate but in this timeline we get this abomination.