Honda H'ness CB 350 Drive Chain Slack Adjustment | Step By Step Procedure | Demonstration
Вставка
- Опубліковано 6 вер 2024
- Here it is Guys. Real time drive chain adjustment of the CB 350. Please refer to my previous video wherein I describe how to measure the slack of the drive chain with the help of a measuring scale.
Link to that video • Video
Hope it is helpful. Thank you.
#hondacb350 #bikemaintenance #motorcyclechain
Love to see how clean you keep your bike..makes me believe I am not the only lunatic here😂
Very nice detailed explanation..lot of thanks
Just a thumb rule brother, you do not need to align the wheel everytime if you turn the adjustment bolts on both sides in exactly the same manner. That is one clockwise rotation on left as well as right and so on... assuming earlier it was aligned which usually is the case. This can help in getting the job done quickly.
After cleaning the chain properly, I hear chain sound more while riding in 2nd or 3rd gear , is it normal?
Wi8ing for thins very long . Thanku so much❤🔥🔥. And one thing i want to know can we provide radial tyres for hness /rs 350..stock tyre is also good but just want to change...
Radial tyres are not necessary for this category of bikes. However if you can find one for this wheel size, you could surely have them fitted.
@@DipayanBose cant find the exact section of this tyres tats sad. But i found 150/60- 17 instead of 150/70-17. Can i go for .. I have RS 350. One video about of tyres of this bike plz hness/rs as well
This tyre would fit, however there are high chances that the ABS and traction control sensors would not work properly since you would be decreasing the diameter of the wheel by downsizing from 70 to 60. Hence not advised.
Hi
I would like to know were would we find a grab rail as you fitted on your bike.
Bro do a video about wobbling issue of cb 350 there is something wrong with bike's manufacturing many owners like me are facing we have a group of 95 people facing issues but no response or solution from Honda or service center can't even ride the or enjoy the bike because of this issue no one is there to give a expert opinion or guide us so sad no youtubers are telling the truth yesterday day went to service center and ridden the test bike it also have issues. Fed up with Honda and Service .
Let me check and investigate a bit Bro. Will get back to you.
Hi @Dipayan, I have adjusted the slack to required set up, but still I face little vibration when I reach 40 in 2nd gear or 60 in 3rd gear or 80 in 4th..is it a common issue...?
Where can I get those required spanners?
Any good tools shop.
Thanks a lot
can I use royal Enfield's chain clean and lube on my highness cb 350's drive chain?
Yes you can.
@Dipayan Bose Hi
Thanks for this video.
It's very informative.
Why my chain getting rusted?
I am using kerosin for chain cleaning
I clean and lub chain after every wash around 500km
Do you have any idea?
Hi Bro, thanks for the appreciation. Rust in chain is a common problem for mostly all motorcycle open chain system. Ignore it, if it is little bit here and there. In anyway, the life of the chain sprocket is around 15k kilometres. It should run flawlessly till then with little bit rust. To avoid it, occasionally lube the chain with thick grade gear oil. I have a dedicated video in my channel where I explain how I deal with rust. You could watch that for better understanding.
@@DipayanBose thanks
@@DipayanBose should we used kerosin or diesel for chain cleaning?
Which one is better?
@@vpatil09 you could use either one. Kerosine is better, however not available always. Hence I use diesel. Never use Petrol.
Useful video bro…..
Wr u buy the backrest with carrier ????
There is no back rest. Top rack is from Zana
Since both sides are in the third point when I checked them in my cb350, is it required to set those points to a 2.5 level?
The point is both should be equal. If one side is 3 the other one should also be 3. If you adjust the chain, the figure will change on the chain side, then you have to change the other(exhaust) side to match this side and make them equal.
In your case it is good. Since both are equal at 3
Hi bro I have cb350rs I got one month back after cleaning and lubrication of chain.
I'm getting a noise from front chain is tere any solution for that, is that major issue or resolvable.
The chain could be a little tight. Thats why the noise. Ride it for few 100 kms and it should settle down.
Whic chain cleaner and lube do u use? Is motul chain cleaner and lube good for honda highness?
I use diesel to clean the chain sprocket and use motul chain lube. You could definitely use Motul for both cleaning and lubing. Should be just fine.
Thank you
Is it okay to use an open head spanner to adjust the axle nut ?
There would be possibility of scrapping the nut. So advisable is ring spanner. Get a good quality one.
Thanks 😊
Total km required for chain slak adjust? Should I do chain slak adjust after 2000 km drive ?
Sorry for late reply. Chain slack adjustment is generally required after 2 to 3 k kilometres. However if ridden aggressively then sooner.
@@DipayanBose Hi Thanks for this video, I recently bought this bike and I wanted to do this chain thing by myself...as big wing showroom is 30km away and local mechanic I dont want to go to...so really liked your video...just wanted to know is it really 2-3K as in my apache I used to do it every 500km...
@@SBhupendraAdhikari If the adjustment is done right, that is proper slack is there all through the chain movement, and ridden generously ( as this bike is a low revving engine unlike apache) and of course cleaned and lubed every 500 to 800 kms, then 2 to 3 k kilometres is a good interval between adjustments.
Congrats for your new bike.
Thank you.
Does tighter chain increase foot pedal vibrations?
Yes it definitely will.
@@DipayanBose Thanks for you reply, today I got my chain adjusted from local garage and vibrations are increased, what should I tell him to do now?
@@prasaddhakne tell him to make it a little bit loose. That should solve it.
Is wd40 recommended as a chain cleaner ?
Yes you can, but cheaper and better is kerosin or diesel.
No, please do not use wd40. It is harsh and may cut the rubber seals in between the joints holding oil. The O rings. Use either kerosene or proper chain clean like C1 motul.
@@pranshugupta2607Agree, never use WD40 for chain cleaning.
👍👍👍❤❤❤