Machine Needle Tip with I ❤️ Ink
Вставка
- Опубліковано 14 жов 2018
- I know a lot of people are wondering how to use I ❤️Ink when doing machine work, so I decided to show you how I use it.
First, you want to make sure your needle tip only overhangs about 2 mm from the tube chamber. If it is hanging out too much it cannot suck up the ink into the tube properly.
Next, turn on your machine, and dip the needle into the ink and wait for the needle to fill the tube chamber with ink.
If you look closely you'll see ink at the tip of the tube, which will slide down the needle and drop down onto the skin so that you can tattoo with that ink.
Make sure you wipe your needle frequently to prevent it from drying up.
Let your art flow! - Навчання та стиль
FINALLY someone who explains this correctly 🙌🏼
Thank you for that demonstration it was great
Thank you so much, I was trying to figure out how long to leave the needle in the ink and when to dip again.
Thank you
I use it with the machine, the results was amazing ! I use it straight out from the bottle , no problem at all . 👍🏼👍🏼
Hi, I'm hoping you see this. I'm having issues with this ink being too runny and falling out of pigment rings all over my table/floor as well as not being able to see as well as i'd like during the machine work. So my question is..is the dilution addition necessary? or more for personal preference? Will not addition the diluting solution make my shading look differently if I don't use it?
I use cup ink holder, u could get on amazon. It come in different size. Or use Vaseline to keep the ink cup in place. Ink up & the cup holder work best . I don’t dilute it . When I do machine work, I normally do not have to do the touch up after 4-6weeks, they stay very well .
Do you use the color directly, and the function of the white solution
Thank you thank you!! I was struggling with my pen .. thinking what was wrong..
Thank you so much for this video. I didn’t know what that lil whole was for🤦🏻♀️. Now i know how it works. Awesome video and great explanation.
How do you adjust the needle length? My cartridges seem to just push the needle all the way out when I put it in my machine.
Should the hole be facing up or down
Hey, would the needles work with Elle Marie SPMU machine?
Thank you for the video. Can you please make a video on different machine needle strokes. And what you prefer to use each needle for.
Tina only primarily does microblading, and only uses a machine for eyeliner. I'll pass this along to her though!
check out the all NEW Tina Davies Academy for machine training online! tinadavies.com/pages/academy
What kind of machine and needle you are using. It look very effective.
That is a Nouveau Contour!
I don’t understand how I can regulate the needle length if it’s sticking out too much?
Thank you!
But it normally gets crusty (the ink ) and clings to the tip. Why is that?
The ink is thinner than pigment. Ink is more concentrated in the skin . Being thin does make it dry quicker . I use baby wipe or wet cotton ball to clean the blade & the needle tip .