How to remove the A-Pillar trims VW GOlf 7

Поділитися
Вставка
  • Опубліковано 19 лип 2019
  • A short video on how to remove the A-Pillar trims on your Volkswagen Golf 7.
    It will be the same on any car with an airbag on the pillar, the trim will not come easy out because of the clips.
    Metal clips OEM number: 5G0 867 276 B - 1 Euro One pice
    Here are some AliExpress links to cheap tools that I use daily in my workshop:
    Plastic removal tool:
    -11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
    s.click.aliexpress.com/e/basZfJg8
    -22 pieces removal tool set
    s.click.aliexpress.com/e/cfz3y3ck
    -7 pieces ceap removal tool set
    s.click.aliexpress.com/e/c5FEA6Uo
    Torx:
    -Torx Screwdriver Set from T5 to T30
    s.click.aliexpress.com/e/cdIOzPBK
    -Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
    s.click.aliexpress.com/e/cDOzHHLw
    Small Electric Drill Cordless Screwdriver:
    s.click.aliexpress.com/e/iAkSGXm
    Hooks:
    s.click.aliexpress.com/e/bGDvRimM
    Flexible Magnetic Pick Up Tool:
    s.click.aliexpress.com/e/btR4NInm
    Rubber Eraser disk:
    s.click.aliexpress.com/e/crov2JVA (i use this to remove old Stickers and Glue Adhesive left on car)
    LED Flashlight:
    s.click.aliexpress.com/e/CbIfLBK
    Infrared Thermometer:
    s.click.aliexpress.com/e/j5Ib2eM
    Check out my other UA-cam channel / carhax
    ❗Check any car's mileage and accident history with carVertical 👉 bit.ly/3b6S8pI
    Here are some cheap tools that I use daily in my workshop:
    Plastic removal tool:
    -11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
    s.click.aliexpress.com/e/basZfJg8
    -22 pieces of a removal tool set
    s.click.aliexpress.com/e/_d8Y...
    -7 pieces of cheap removal tool set
    s.click.aliexpress.com/e/c5FEA6Uo
    Torx:
    -Torx Screwdriver Set from T5 to T30
    s.click.aliexpress.com/e/cdIOzPBK
    -Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
    s.click.aliexpress.com/e/cDOzHHLw
    Small Electric Drill Cordless Screwdriver:
    s.click.aliexpress.com/e/iAkSGXm
    Hooks:
    s.click.aliexpress.com/e/bGDvRimM
    Flexible Magnetic Pick-Up Tool:
    s.click.aliexpress.com/e/btR4NInm
    Rubber Eraser disk:
    s.click.aliexpress.com/e/_Bf9... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
    LED Flashlight:
    s.click.aliexpress.com/e/CbIfLBK
    Infrared Thermometer:
    s.click.aliexpress.com/e/_d61...
    DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
    WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
  • Авто та транспорт

КОМЕНТАРІ • 27

  • @boostedbliss07MK5
    @boostedbliss07MK5 4 роки тому +2

    Perfect! Well done showing the back of the trim with detailed info about clips and pillar hole locations. I've seen another blog but it didn't help like your video has! The mounting clip for the lower window trim u remove after the A pillar is notorious for rattle noises. Some tesa felt tape fixes it. Now I'm ready to fix it!

  • @CoreyHildebrandt
    @CoreyHildebrandt 4 роки тому +17

    A tip for removing the trim. If you look at the clips, there are teeth that seem to keep the tab from coming out. In the video, note that the slot that these two clips rest in are slotted. Instead of using a lot of force to remove the trim, pull the trim until it stops. Take a long, thin screwdriver and slide each of the clips upward. They will disengage from the trim allowing you to pull the trim away. The clips will remain in the slot. I removed the clips from the slot so that installation would be easier. I essentially had to crush the clips to get them out and use new clips. Doing the revers screwdriver trick would have been too tricky.

    • @JD-of4wd
      @JD-of4wd 4 роки тому +1

      Any idea on the part number for the 2 stage spring clips or where I can find them in uk? Cheers

    • @msmith508
      @msmith508 Рік тому

      Or maybe some assorted picks from harbor freight :)

    • @NJ-500
      @NJ-500 4 місяці тому

      ​@@msmith508maybe :)

  • @Deceptive24
    @Deceptive24 3 роки тому +1

    Thanks!! I was losing my mind, i could see the clips but did not understand why they were not like the normal ones!

  • @Litvinoffmm
    @Litvinoffmm 5 місяців тому

    Thank you. Highly recommend!

  • @LR67935
    @LR67935 6 місяців тому

    Hi, I have a scirocco is the removal similar ?

  • @DonsShed
    @DonsShed 4 роки тому +1

    Thank you very much :)

  • @MrTurbo909
    @MrTurbo909 2 роки тому

    good video

  • @jamrob7047
    @jamrob7047 2 роки тому

    Excellent 👌

  • @fiaapog
    @fiaapog 3 роки тому

    What is the part number for that part?

  • @elterrible00esb
    @elterrible00esb 4 роки тому +4

    Did you video the reinstall? Im having a really hard time reinstalling them. Removal you can just yank real hard but the install fitting the end of the pillar in place is very hard trying to get everything lined up and the parts that need to bend you dont really have control over from the opposite end of the pillar.

    • @elterrible00esb
      @elterrible00esb 4 роки тому +1

      I got it! It seemed impossible. It will not slide just right in, the dash and window trim pieces it has to slide into require a lot of twisting and the only way that worked required me to significantly push down on the compressible dash to squish it in. Pretty nerve racking but the dash did not get scratched or torn.

  • @blue-ck9ns
    @blue-ck9ns 3 роки тому +2

    I’m just going to go ahead and order the replacement clips before installing, because I know i’ll probably break them

  • @peppio
    @peppio 4 роки тому +3

    Help me To remove The side pannel where is located The sea bealt side driver. .I have many noises from that direction ..some plastics or wire touch togheter

    • @warachito
      @warachito 4 роки тому

      Im having some noises near a pillar. But im worried to break something

  • @romannavarro3137
    @romannavarro3137 4 роки тому

    Mine wont come off

  • @KingEsayasThe_3rd
    @KingEsayasThe_3rd 3 роки тому +1

    U are my hero 🎯😍

  • @lalljp
    @lalljp 3 роки тому

    What are the part numbers for the clips? I can only find one type

    • @fiaapog
      @fiaapog 3 роки тому

      Metal clips OEM number: 5G0 867 276 B - 1 Euro One pice

  • @JuanPerez-yy5hr
    @JuanPerez-yy5hr 5 років тому +1

    Awsome thank you

  • @natekingcole
    @natekingcole 2 місяці тому

    Min is harder to get back on than it was to remove.

    • @DFCGarage
      @DFCGarage  2 місяці тому

      Spray the clips with some WD-40 and make sure that the clips are aligned with their slots