I want to thank you so very much for your video!! We watched it several times to get every detail!! Much appreciated!! Now my 75 yr. Young mom can open and close the gate with her fingertips!!
Thank you so much, that means a lot . I should have bought these many years ago, they are a big help. Could you give the video a share? That would really help the video get out to others. Thanks again.
It's a sign that I came to this video, I am wearing almost the same wrist brace !! Quick tip when drilling with a large bit, small pilot hole will get you through that metal quicker and prevent the bit from dulling so fast.
Thanks for the info, Much appreciate it. The lift assist was the greatest improvement to the trailer I have ever made. Wish I had done it 20 years ago.
Thanks Joey. I wanted to get one of these and keep putting it off. My tailgate is not as heavy but it does wear you down a bit. Thanks for the walk through on installation. You and the wife did an great job. I definitely know that seriously hot weather. Have a fine week.
I found this one on amazon for 179.00, I figured it was time to get a set. Seen them in the past for 300.00. knowing what I know now even at 300.00 it would have been worth every penny
It is worth it, I was going to buy them a few years ago (about 10 years ago) but they were 300.00 and I didn't want to spend that much. Let me tell you, even at 300.00 it would have been worth every penny. I found them on Amazon for 179.00, so I grabbed them. You won't regret it, they are a back saver for sure. Have a great day Russ.
Nice job. I just did mine this weekend and saw this video after the fact. Mine went just as good as yours did except my latch pipes didn't need to be cut. (just lucky of the placement). My gate is a double gate and built in heavy duty ramps and I can still lower and raise it with one finger(and that's with arthritis) LOL. The instructions were probably the best instructions I have ever seen. Good job and a wonderful video.
Thank you, The directions were pretty easy. Usually nothing goes together without a few swear words and throwing something. but this went pretty smooth.
It's amazing how smooth things go when you follow a good set of directions. I usually like going the hard route though haha! That gorilla lift is going to be really nice to have! Great job with the install! I think you're angled cut on the tailgate brackets should work out well too. As long as you don't put extremely heavy stuff leaning up against it you won't miss it.
It helped having my wife read the steps to me, lol. I am like the typical male, I don't even open the instructions, and Kris knows that, that is why she read them to me. Or I would have been out there for hours trying to figure it out, lol. They really are a back saver. Have a great day Chip.
It does work great Tim, and very easy to install, I still can't believe how easy. It helped my wife was reading the directions step by step for me. Have a great day.
It already is Jack, I should have bought this years ago, but at 300.00 it was hard to swallow. So when I found it for 179.00 I had to get it. I honestly have to say, looking back after useing this for a couple weeks, It would have been worth the 300.00 and more.
It is worth it, I was going to buy them a few years ago (about 10 years ago) but they were 300.00 and I didn't want to spend that much. Let me tell you, even at 300.00 it would have been worth every penny. I found them on Amazon for 179.00, so I grabbed them. Have a great day.
Thank you, I cant believe the difference it makes. I dont even bend over any more. i kick it up with my foot and it raises to where I can grab it. And it goes down slowly with just a little nudge. Its great
Note To You My Trailer Friend, When Drilling A Larger Hole, Like 1/2 Inch, Use A 1/4 Inch Drill Bit First, Then Use The 1/2 Inch, It Will Drill Much Better & Smoother...
I want to thank you so very much for your video!! We watched it several times to get every detail!! Much appreciated!! Now my 75 yr. Young mom can open and close the gate with her fingertips!!
Thank you so much, that means a lot . I should have bought these many years ago, they are a big help.
Could you give the video a share? That would really help the video get out to others. Thanks again.
It's a sign that I came to this video, I am wearing almost the same wrist brace !! Quick tip when drilling with a large bit, small pilot hole will get you through that metal quicker and prevent the bit from dulling so fast.
Thanks for the info, Much appreciate it. The lift assist was the greatest improvement to the trailer I have ever made. Wish I had done it 20 years ago.
Thanks Joey. I wanted to get one of these and keep putting it off. My tailgate is not as heavy but it does wear you down a bit. Thanks for the walk through on installation. You and the wife did an great job. I definitely know that seriously hot weather. Have a fine week.
I found this one on amazon for 179.00, I figured it was time to get a set. Seen them in the past for 300.00. knowing what I know now even at 300.00 it would have been worth every penny
Absolutely clean work. Thank you for show all the process. Have a great night
Thank you my friend
Good system . It should save a lot of strain on your arm and back. Nice clean installation. Good job. ATB. my friend.
Thank you Paul, its a back saver for sure. Have a great day my friend
My buddy has a lawn care business too and bought one of these and loves it. Enjoy
I love mine too, cant believe I didnt do this years ago.
Way to go Joey. Nicely done 👍
Thank you Hank, I love that lift. Makes it so easy
Good Job Joey! That should save a lot of wear and tear on your back!
Thanks Paul, it surely is, It is so easy to lift the tailgate up and down now.
Ordered one for friends trailer from Amazon yesterday. Thanks for this video!
You are very welcome
Okay, I heard about these but now I have to get one. They really do look like they help a lot. Thanks Joey.
It is worth it, I was going to buy them a few years ago (about 10 years ago) but they were 300.00 and I didn't want to spend that much. Let me tell you, even at 300.00 it would have been worth every penny.
I found them on Amazon for 179.00, so I grabbed them. You won't regret it, they are a back saver for sure.
Have a great day Russ.
Nice job. I just did mine this weekend and saw this video after the fact. Mine went just as good as yours did except my latch pipes didn't need to be cut. (just lucky of the placement). My gate is a double gate and built in heavy duty ramps and I can still lower and raise it with one finger(and that's with arthritis) LOL. The instructions were probably the best instructions I have ever seen. Good job and a wonderful video.
Thank you, The directions were pretty easy. Usually nothing goes together without a few swear words and throwing something. but this went pretty smooth.
Good video man I'm about to install one for a customer. You helped alot.thank you and be well.
You are very welcome
Just got mine. Great job on the video. Going to be a backsaver
I wish I would have gotten mine 20 years ago, lol
It's amazing how smooth things go when you follow a good set of directions. I usually like going the hard route though haha! That gorilla lift is going to be really nice to have! Great job with the install! I think you're angled cut on the tailgate brackets should work out well too. As long as you don't put extremely heavy stuff leaning up against it you won't miss it.
It helped having my wife read the steps to me, lol. I am like the typical male, I don't even open the instructions, and Kris knows that, that is why she read them to me.
Or I would have been out there for hours trying to figure it out, lol.
They really are a back saver.
Have a great day Chip.
Looks like works great! You made it look simple to install
It does work great Tim, and very easy to install, I still can't believe how easy. It helped my wife was reading the directions step by step for me.
Have a great day.
Thanks for this video. I’m a visual person and this helped tremendously.
Thank you, glad it helped.
Thumbs up awesome always good information thank you for sharing
thank you, have a great day
That's going to be a back saver my friend! Good install.
It already is Jack, I should have bought this years ago, but at 300.00 it was hard to swallow. So when I found it for 179.00 I had to get it. I honestly have to say, looking back after useing this for a couple weeks, It would have been worth the 300.00 and more.
Great video! I’m from South Carolina
Thank you.
Hey Joey that was awesome really enjoyed that. I'm going to give you and the video a thumbs up 👍👍 Thank you for sharing friend.
Thank you Jeremy, So glad you are back my friend
Good show buddy, that's definitely worth it and make things alot easier.
It is worth it, I was going to buy them a few years ago (about 10 years ago) but they were 300.00 and I didn't want to spend that much. Let me tell you, even at 300.00 it would have been worth every penny.
I found them on Amazon for 179.00, so I grabbed them.
Have a great day.
Very Good FYI Installation video. Thank You.
You're welcome!
Joey Great video now i dont have to read the directions. How much for the camper in the background?
Thank you, no, the camper is not for sale, we use it a lot.
Great video, great installation too my friend. Happy mowing
Glad you found it helpful.
Nice work Joey, looks great!
Thank you, it was a lot easier to install than I thought. It helped having the wife read me the directions as I was going along, 😆
Great Video Thank y’all for sharing 👍
you are very welcome.
Thanks I had no idea how to install a gorilla lift two pictures in instructions 😊
glad the video helped, best thing i could have done was to add the gorilla lifts.
That seems like a good helper 💖💖💖🌷🌷🌷😎😎😎👍👍👍😍😍😍😍
The best, I don't have to feed it and it doesn't argue with me, lol
Cool Gate Lift
Thank you, I lime it.
thank you for your video.
You are welcome
Big thumbs up my friend 👍👍
Thank you John
Very good video
Thank you, I appreciate it.
That’s clean! I really like that! Great video👊
Thank you, I cant believe the difference it makes. I dont even bend over any more. i kick it up with my foot and it raises to where I can grab it. And it goes down slowly with just a little nudge. Its great
Nice install Joey! That will be a boon for you.
It is so nice, wish i would have bought it years ago
Great video!
Thanks!
That's pretty nice setup
Thank you Mike, it's a back saver for sure. I hope all is well
Great video, thank you, been thinking about getting some for my trailer, how are they holding up ?
They are holding up great, I wish I would have put them on years ago.
Thanks for the video. Couldn't help but see th gas can rack up front. Where did you get it?
I had it made, ant trailer shop or decent welder could make it for you. You can even find them on marketplace sometimes.
Thanks!!! Great Vid!
Thanks, hope it helped
I love your wrist brace i need one of those
Thank you
great job thanks
Thank you too!
Thanks for showing me how to do this ❤😂
No problem 😊
That thing is sweet! I love it, this should make it super easy for ya brother. Well easier lol! 🤣👍
I am kicking myself in the ass for not buying it years ago
My Slice Of Heaven Outdoors I bet! That lift gate is sweet, I’m trying to figure out how I can modify my trailer to use that lol! 👍
Note To You My Trailer Friend, When Drilling A Larger Hole, Like 1/2 Inch, Use A 1/4 Inch Drill Bit First, Then Use The 1/2 Inch, It Will Drill Much Better & Smoother...
Thank you for the tip, I appreciate it
And you can use Tap magic when drilling in steel to help
Could you grind those long bolts off after installation?
I dont see why not.
Nice video
thanks
Helo you nice video
thank you
Joey when you going to spread the seed on your property
I did it 2 weeks ago, I made a video but for some reason It did not record any sound
My Slice Of Heaven Outdoors oh that sucks when you going to do a update on the plot
@@georgiadeerhunting8337 in about a week or 2