And on the back pipe,with the rap the exhaust pipe is about 3/8 in from the clutch air exhaust plastic pipe,the factory exhaust pipe had a metal heat shield that wont fit with the wrjc pipe. The thin reflector tape on the clutch pipe dont seem enough, have you added extra tape? I will install reflective blanket just to be on safe side.
Hey I have the same bike and just bought the duals from rjwc I was wanting to know what time did you use and if it’s hard to install the tune? And am I able to run it without a tune
Did you fuel tune with your yoshi on ? Or keep it stock like can am days you can do . Just put one on my 2021 outlander 1000r and seems to be running great with just slip on . No rise in gauge heat whatso ever
and the yoshi wasnt high quaily stainless??? all mine were 316. heat wrap is where its at ON ANYTHING...lol. lawn mower or my turbo on the truck duh!!! wheres the O2 sensor??
Hello, noticed you have the alpine flex plow on your outty,just purchased new 1000 ltd 2020, and i have issues with brp, i bouth the underside plate to attached my alpine flex, but brp sent me the new plate with there new plow system, even if i told them my plow was a alpine flex, they have instaled it ( and cutting a lot of my underside protection in front to do so), the plate is way to in front ,almost paralell to front axle,on my old outy ( 2014, burned down to the ground and not avail@ble) it seem to be more in the midle of the frame, you would not have by any chances picture of plate location or instalation manual for it? Will return my machine to dealer for them to put it in the right place but tehey say that it as been installed according to brp specs, will see but would like to proove them that it needs to be ferther back for a alpnie flex. Tk s in adavance and keep up those video, wish i could ride with you guys some day ( i am in the estern township, quebec) regards
I understand my heat measurements aren't exact due to the nature of how my temp. gun works (deflection/reflection) but you cannot deny this beast is running far cooler! See the stock vs yoshimura here: ua-cam.com/video/0fvOA-j9OAk/v-deo.html What do you think? stock vs yoshimura vs rjwc?
I have a short frame xmr and ordered that same system by mistake. Its in the mail now. Will that exhaust for the max fit a short frame, or will i have to send it back?
Great job buddy, sounds mint.
It sounds amazing. I too bought heat wrap for my exhaust that will be put on in Jan. Amazing how hot it gets
I dont think anyone would have believed me if it weren't for the flir temp gun. I recommend doing whatever you can!
Cant wait for this one im sure its gonna be awesome
I think so! I am super happy with the way everything is turning out! Hope to see you tonight!
What tune
And on the back pipe,with the rap the exhaust pipe is about 3/8 in from the clutch air exhaust plastic pipe,the factory exhaust pipe had a metal heat shield that wont fit with the wrjc pipe. The thin reflector tape on the clutch pipe dont seem enough, have you added extra tape? I will install reflective blanket just to be on safe side.
Awesome video! 👍 I don't think it would be too loud. Sounds great!
Very different in person aha. Gopro cant pick up the tone. Thanks for watching!
Great video buddy the bike sounds tight those pipes are sick
Thanks buddy! Much better in person!
Hey I have the same bike and just bought the duals from rjwc I was wanting to know what time did you use and if it’s hard to install the tune? And am I able to run it without a tune
Yes you need a tune. I highly suggest contacting dirtylife.ca and tell them we sent you. They will know exactly what you need.
Hey, when you wraped you pipes, how long it took to cook?, mine have been smoking for 40 minutes now, kind of scarry!,,,,,
Did you fuel tune with your yoshi on ? Or keep it stock like can am days you can do . Just put one on my 2021 outlander 1000r and seems to be running great with just slip on . No rise in gauge heat whatso ever
Hi is this rjwc stack dual has the same sound as the rjwc slipon dual? Thanks
Looks great
Did you get the decibel reading with throttle?
Is that exhaust really loud I would will love to buy on
Did the Header make a noticeable power difference? Is it worth it?
It is not worth it unless you get into big bore kits. Otherwise don't bother knowing what I know now
@@MainvilleATV Thanks appreciate it 👍
and the yoshi wasnt high quaily stainless??? all mine were 316. heat wrap is where its at ON ANYTHING...lol. lawn mower or my turbo on the truck duh!!! wheres the O2 sensor??
what size of tires ?
Hello, noticed you have the alpine flex plow on your outty,just purchased new 1000 ltd 2020, and i have issues with brp, i bouth the underside plate to attached my alpine flex, but brp sent me the new plate with there new plow system, even if i told them my plow was a alpine flex, they have instaled it ( and cutting a lot of my underside protection in front to do so), the plate is way to in front ,almost paralell to front axle,on my old outy ( 2014, burned down to the ground and not avail@ble) it seem to be more in the midle of the frame, you would not have by any chances picture of plate location or instalation manual for it? Will return my machine to dealer for them to put it in the right place but tehey say that it as been installed according to brp specs, will see but would like to proove them that it needs to be ferther back for a alpnie flex. Tk s in adavance and keep up those video, wish i could ride with you guys some day ( i am in the estern township, quebec) regards
Bad ass👌🏼👌🏼 how much did you spend on everything?
Mixed bag of purchase and sponsorship so it's hard to get an exact number
Is that response to every q
Is that an app on your phone if so what app is that called
I understand my heat measurements aren't exact due to the nature of how my temp. gun works (deflection/reflection) but you cannot deny this beast is running far cooler!
See the stock vs yoshimura here: ua-cam.com/video/0fvOA-j9OAk/v-deo.html
What do you think? stock vs yoshimura vs rjwc?
Can you feel the power difference or not really?
Not really. But when you add all things I've done together its night and day to stock
Mainville ATV and Outdoors thank you very much , great video
Very awesome. Is that currently without a tuner?
Yes, its with a tuner, but that was a whole other video. Had some complications to explain
Gotcha. So it’s prolly running cooler because of that too right? Was likely leaned out before without the tuner.
@@HondudeTeamMudhogs you got it! Had it tuned proper, which the rjwc head allowed with o2 bungs built into it. Air to fuel is on point now.
Mainville ATV and Outdoors awesome. Now you just gotta wait for spring haha. I’ll likely see you around next season. Cheers.
does that have a spark resistor?
Yes, it does have a spark arrestor!
@@MainvilleATV awesome thank you. I was looking for an exhaust that was under 96 decibels and had a spark arrestor. State law down here.
Sweet looking good brother
Thanks man!
I have a short frame xmr and ordered that same system by mistake. Its in the mail now. Will that exhaust for the max fit a short frame, or will i have to send it back?
The slip on portion is the exact same thing. You're good.
@@MainvilleATV ok thanks. Love the videos
What size lift you got on her?
No lift.
RJWC sounds so much better
So clustered comparing it to my renegade
Kinda bullshit they would send them bikes out with that much exhaust heat.
Doing a comparison with one in garage and one outside come on now.
It's not scientific. The difference is obvious.
@@MainvilleATV oh ok 👌 did I push a button? So easily
@@04tsxpower not at all, that's simply the truth.
@@MainvilleATV oh ok
Sooo, can anyone stop splaining xperimentn , and give me fax ? What worx ? ..spent time n $ wrapn , meltd evertng..u guys r years behind me.