Thank for your kind comment. The electricity consumption is not high. This simulator is only using only one standard power cable. The maximum consumption is 200W.
you program your thing in 5 minutes according to the duration of the flight then either you cross your hands if you play with the words arrows ! Nice Job :))
Toda una experiencia inmersiba, hasta parece simulador se una escuela de vuela . Saludos desde la CD.MEX. mucho realismo hasta en las palancas de gases, el noton de estacionamiento, las reversas de los motores. Ufff.. mw encanto.
Don't understand the overhead, unless this means the VDU? I see no 737 Overhead Panel in use in this? Just the lower level PFD quadrants, instruments and AP binnacle?
Thank you for your message. The overhead version is available here : store.ncinformatique.ch/product/panel-737-desktop-avec-overhead-737-v2-pmdg-737-800-900-ngx/
When I try to get to your website I get the following error message "Votre installation PHP ne dispose pas de MySQL. Extension requise pour WordPress." It doesn't seem very impressive for a business to not have a universal working website? Why is it not working?
Yes, it is. You can buy only MIP panel without overhead, trottle and steering wheel. You can contact us by email info@ncinformatique.ch to have an offer.
Good morning, M Law Please contact us by email at the following address: info@ncinformatique.ch So that we can establish you an specific offer. Best regards
We have few other simulators who are complete package including the full pedestal,overhead, motorized thotttle, etc. Here you can find them store.ncinformatique.ch/en/product-category/simulation-en/full-panels/boeing-737-en/
I have a question why in some Boeing’s do you put the gears in an off position while flying but air buses just have an up down and the 737 has up off down
The OFF function is done automatically in the new Boeings and Airbuses. The connection between the lever and the landing gear/hydraulic system is via "Fly-by-wire". The 737 uses an older mechanical systems.
Nous n'avons pas encore déterminé le prix exact. Envoyez-nous vos coordonnées à info@ncinformatique.ch et nous vous ferrons parvenir le prix et les informations supplémentaires lorsque nous les aurons.
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Now our Panel 737 Desktop is compatible with FSX, P3Dv3, P3Dv4 and X-Plane 10. We are working on it so it will be normally available for X-Plane 11 soon.
The 737 v2 has a PC included in the MIP for instrumentation. With this solution you haven't any performance impact in your main PC. The version 2 works with X-Plane 10 too and you have SimAvionics to simulate for instrumentation. We did some changes with the setup to simplify installation. Now it is very stable without bugs. The product has reached maturity !
The price for the MIP, throttle and the Overhead is 19'900CHF and the Overhead support is 1'698CHF. Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer.With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
The price for the MIP, complete pedestal with motorized throttle (trim wheel), sidestick captain console (with tiller) and the Overhead is 29'800 CHF (About 29'800 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have two little PCs in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel A320 Desktop on your computer, manuals and unlimited support are included in the price too. You can buy this simulator by contacting us at info@ncinformatique.ch, on Whatsapp +41 79 240 20 25 or directly by clicking this link. store.ncinformatique.ch/product/panel-a320-desktop-captain/ You can pay a deposit with PayPal or Credit card.
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Good morning, M Lopez Please contact us by email at the following address: info@ncinformatique.ch So that we can establish you an specific offer. Best regards
Fadi Salah The screen and the pc aren't included in the price of 19900 CHF but if you would like an offer without the throttle please contact us by email here: info@ncinformatique.ch
Notre magasin "NewConcept informatique" se situe à Lausanne en Suisse. Nous avons un showroom où nous vous y accueillerons volontiers afin vous proposer une démonstration de nos produits.
You can buy this simulator by contacting us at info@ncinformatique.ch, on Whatsapp +41 79 240 20 25 or directly by clicking this link. store.ncinformatique.ch/product/panel-a320-desktop-captain/ You can pay a deposit with PayPal or Credit card if you order directly online. We ship all around the world.
The price for the MIP and the Overhead is 19'900CHF and the Overhead support is 1'698CHF. Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer.
The price for the MIP and the Overhead is 19'900CHF and the Overhead support is 1'698CHF. Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. You can order directly by email and pay with PayPal or by bank transfer. You just need to send us your complete address. We ship all around the world for information.
The price for the MIP, throttle and the Overhead is CHF 19'900.- and the Overhead support is CHF 1'698.- Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Hello, yes of course we can import in Tanzania. Please, send us an email at info@ncinformatique.ch with your complete address to have a detailed offer.
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
The price for the MIP, complete pedestal with motorized throttle (trim wheel), sidestick captain console (with tiller) and the Overhead is 29'800 CHF (About 29'800 USD at today's exchange rates). Shipping and packaging cost aren't included. With our solution instrumentation software is included in the price. You have two little PCs in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel A320 Desktop on your computer, manuals and unlimited support are included in the price too. You can buy this simulator by contacting us at info@ncinformatique.ch, on Whatsapp +41 79 240 20 25 or directly by clicking this link. store.ncinformatique.ch/product/panel-a320-desktop-captain/ YYou can pay a deposit with PayPal or Credit card if you order directly online.
We still have actually in stock a Certified Pre-Owned one of this model. store.ncinformatique.ch/en/product/pre-owned-panel-737-desktop-v2-with-overhead-and-all-options/ Don't hestitate to contact us by email info@ncinformatique.ch
It cost 19'900 CHF. The overhead, the software, the scripts, the driver and the trottle are included. Please send an email to us here to have an offer with detailed shipping cost info@ncinformatique.ch
Étant fan de simulation c’est juste du rêve que vous avez conçu!🤩🤩🤩👍
Great Job, would be nice to see with XP11
Durul Baykal i agree
P3D better, i think
I wonder how much the electricity paper will be😂
But this setup is awesome
Thank for your kind comment. The electricity consumption is not high. This simulator is only using only one standard power cable. The maximum consumption is 200W.
Make sure to update your AIRACs lol. Looks like a fantastic product!
you program your thing in 5 minutes according to the duration of the flight then either you cross your hands if you play with the words arrows ! Nice Job :))
Its so cool, its like you are feeling like in a real plane.
Franchement bravo ça donne envie d'essayer ! ;)
Wow.....it's amazing. Just like the real flight cockpit. Thanks to technology.
I am a big fan of this kind of systems
I need this , plz tell what is the cost for it
20,000 dollars
If I new about this store when I was in Switzerland I would have dropped in for the day.
how much for the version with MCAS upgrade?
What a masterpiece of technology
En un seul mot : bravo !
Newconcept Informatique is pleased to present its new website. The website is now also available in English !
store.ncinformatique.ch/en/
le top du top! extraordinaire!
Toda una experiencia inmersiba, hasta parece simulador se una escuela de vuela . Saludos desde la CD.MEX. mucho realismo hasta en las palancas de gases, el noton de estacionamiento, las reversas de los motores. Ufff.. mw encanto.
Привет. Классно! Покупал или собирал?
Don't understand the overhead, unless this means the VDU? I see no 737 Overhead Panel in use in this? Just the lower level PFD quadrants, instruments and AP binnacle?
Thank you for your message. The overhead version is available here : store.ncinformatique.ch/product/panel-737-desktop-avec-overhead-737-v2-pmdg-737-800-900-ngx/
this is what happens when pilots work at home
But i like it
Whats up with the best? X-Plane 11?
Sweet, that’s enough 737 reality🤪✈️👌
after being compatible with this simulator will you have confidence to fly a plane
$19,000
Is that right ?
Impressive!
Yes this is right.
18,194.82USD as of TODAY based on exchange rates.
Someday 😌
No x plane 11??????
Not xplane 11 compatible?
Dear Santa...
Кайф! Слов нет! Мечта!
Sorry, I don't see the overhead, the title says "avec overhead"
When I try to get to your website I get the following error message
"Votre installation PHP ne dispose pas de MySQL. Extension requise pour WordPress."
It doesn't seem very impressive for a business to not have a universal working website? Why is it not working?
Peter Finkill Thank you for your report. We fixed the error. Sorry for inconvenience.
Is it possible to buy only the desktop cockpit without the overhead and without the throttle and steering wheel?
Yes, it is. You can buy only MIP panel without overhead, trottle and steering wheel. You can contact us by email info@ncinformatique.ch to have an offer.
Why isn't the Overhead panel shown in the video? Or did I miss it?
Jesper Fuglsang Nielsen We purpose our Panel 737 Desktop with the overhead or without. We will post a same video with overhead soon
dear santa...
;-;
More than I can afford for sure. Nice though.
How much would be the desktop cockpit (without the overhead, the throttle and steering wheel)?
Good morning, M Law Please contact us by email at the following address: info@ncinformatique.ch
So that we can establish you an specific offer. Best regards
not bad ! but it lacks an element, the pedestal speed break etc ...
We have few other simulators who are complete package including the full pedestal,overhead, motorized thotttle, etc. Here you can find them store.ncinformatique.ch/en/product-category/simulation-en/full-panels/boeing-737-en/
compatible with Flight sim 2020 ?
I have a question why in some Boeing’s do you put the gears in an off position while flying but air buses just have an up down and the 737 has up off down
Boeing does it to save wear and tear on the hydraulic system.
The OFF function is done automatically in the new Boeings and Airbuses. The connection between the lever and the landing gear/hydraulic system is via "Fly-by-wire". The 737 uses an older mechanical systems.
The 737MAX has a two position gear lever. No “OFF” position
Ce serait bien le Boeing 787 ou lr tout nouveau Airbus A350 et un simulateur plus récent. Ce serait combien une version pareil en Euros ?
Nous ne proposons pour l'instant que le Panel 737 Desktop mais une version A320 avec le même concept est en cours de développement !
NewConcept Informatique L'A320 ce serait extremement bien, à combien ce serait ?
Nous n'avons pas encore déterminé le prix exact. Envoyez-nous vos coordonnées à info@ncinformatique.ch et nous vous ferrons parvenir le prix et les informations supplémentaires lorsque nous les aurons.
Superbe et pratique mais trop couteux
Just a question how much can i buy it for?
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
How much is this?
I live in the Philippines so prob this is soooooo expensive
@@NewConceptInformatique i mean the entire thing the panels, overhead
Still amazing quality though
something close to a house in brazil
@@karljustinecatajoy9373 Oo nga mahal siya pero I think ang target demographic nila ay mga piloto at plus mayroon pang shipping
22,000 (twenty two thousand dollars) USD
Awesome,great job capt
Omg!!love it!
i love it, whats the cost of it ? can someone make an order ?
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Super !!!!!! Est ce compatible avec FlightGear ?
Le simulateur est compatible avec FSX, P3Dv3, P3Dv4,X-Plane 10 mais il ne l'est as avec FlightGear.
NewConcept Informatique
C’est bien dommage, est ce que cela sera possible dans l.avenir ?
Nous sommes désolés mais ce n'est pas prévu pour le moment.
If you get a version that will work with X-Plane and or FS2020 and my Brunner MKII Yoke and Rudder Peddles and I’ll buy it.
HI there , I have one question, is it not compatible with X-plane?
Now our Panel 737 Desktop is compatible with FSX, P3Dv3, P3Dv4 and X-Plane 10. We are working on it so it will be normally available for X-Plane 11 soon.
What is the difference between the 737 v1 and 737 v2?
The 737 v2 has a PC included in the MIP for instrumentation. With this solution you haven't any performance impact in your main PC. The version 2 works with X-Plane 10 too and you have SimAvionics to simulate for instrumentation. We did some changes with the setup to simplify installation. Now it is very stable without bugs. The product has reached maturity !
What does it cost?
The price for the MIP, throttle and the Overhead is 19'900CHF and the Overhead support is 1'698CHF. Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer.With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
NewConcept Informatique what do you mean by HCF?
its anable to buy?
The price for the MIP, complete pedestal with motorized throttle (trim wheel), sidestick captain console (with tiller) and the Overhead is 29'800 CHF (About 29'800 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have two little PCs in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel A320 Desktop on your computer, manuals and unlimited support are included in the price too. You can buy this simulator by contacting us at info@ncinformatique.ch, on Whatsapp +41 79 240 20 25 or directly by clicking this link. store.ncinformatique.ch/product/panel-a320-desktop-captain/ You can pay a deposit with PayPal or Credit card.
NO Xplane 11??
Actually this simulator works with FSX, Prepar3D V3, Prepar3D V4 and X-Plane 10. However we are working on a solution for X-Plane 11.
price?
Comment se procurer ce matériel, je suis au cameroun .
I think u with panel 737 desktop play x-plane 11 (sorry for my bad english)
Hello how can I get this equipment?
Hello, please contact us directly at info@ncinformatique.ch to have a detailed offer.
I want a Boeing 737 , 747 or a 777 cockpit panel so bad !!
mee too so bad! :(
Im waiting until it works under xp11. Could you pls tell me if that will be in Future? Cheers
We are working on it so it will be normally available for X-Plane 11 soon.
how much in usd for the mip
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF
(About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer.
With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics.
So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
OMG!! Is That a game Station I Would Love To Have Such If I do The Whole Community Would be at My Room Oh my Goodness.
Pro simulation next level
Oommmaaayyygggaaatttss
Where is this shop?
The store address is: Avenue de la Borde 29, 1018 Lausanne, Switzerland.
¡Beautiful beautiful thank you so much!
I would like a B757 one like this
How much?
Eder Albertino like 20 Grand
Eder Albertino 20 grand
Eder Albertino 19990 CHF
21 grand
Around 21k USD
Hola como estas soy de argentina quería saber cuanto me saldría un simulador y si haces el envió a mi país gracias
Good morning, M Lopez Please contact us by email at the following address: info@ncinformatique.ch
So that we can establish you an specific offer. Best regards
How to make gpu power on in it???
Next level stuff right here
If i need one piece panel only out pc and tv and throtell how does it cost ??
Fadi Salah The screen and the pc aren't included in the price of 19900 CHF but if you would like an offer without the throttle please contact us by email here: info@ncinformatique.ch
Quel est le magasin ou tu a acheté le simulateur?
Notre magasin "NewConcept informatique" se situe à Lausanne en Suisse. Nous avons un showroom où nous vous y accueillerons volontiers afin vous proposer une démonstration de nos produits.
Où est le magasin de video?
Notre magasin est situé à Lausanne en Suisse. Nous vous accueillerons volontiers pour une démonstration.
Is it compatible with FSXSE or MSFS2020 nowadays?
It is fully compatible with Prepar3D V4.5, Prepar3D V5 and MSFS2020
are you a real pilot
✈Super✈👍👍👍
Wow where can I get all this stuff in New York?
You can buy this simulator by contacting us at info@ncinformatique.ch, on Whatsapp +41 79 240 20 25 or directly by clicking this link.
store.ncinformatique.ch/product/panel-a320-desktop-captain/ You can pay a deposit with PayPal or Credit card if you order directly online. We ship all around the world.
Quanto custa para montar um equipamento deste nível? Muito bom vídeo o melhor que vi até agora
The price for the MIP and the Overhead is 19'900CHF and the Overhead support is 1'698CHF. Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer.
@@NewConceptInformatique thanks for the answer
i want one!!!!!!!!!!!!!!!!!!!!
And you are not the only one )
Does it work with FS2020?
Yes it will work with FS2020. We are already working on this update.
How can I get the flight simulator from. Egypt ?
And how much ??
The price for the MIP and the Overhead is 19'900CHF and the Overhead support is 1'698CHF. Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. You can order directly by email and pay with PayPal or by bank transfer. You just need to send us your complete address. We ship all around the world for information.
This is awesome!! 👍💗💗💘
How much does the panel and the connections cost in Dubai
The price for the MIP, throttle and the Overhead is CHF 19'900.- and the Overhead support is CHF 1'698.-
Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer.
With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics.
So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Hello! I am in Tanzania can you import them here in my country?
Hello, yes of course we can import in Tanzania. Please, send us an email at info@ncinformatique.ch with your complete address to have a detailed offer.
Is the price the same today??
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Le prix en € svp ??
Wonderful!
How much pounds does the whole setup cost
The price for the MIP, throttle and the Overhead is 19'900CHF (About 19'900 USD at today's exchange rates) and the Overhead support is 1698CHF (About 1'698 USD at today's exchange rates). Shipping and packaging cost aren't included. Please contact us at info@ncinformatique.ch to have a detailed offer. With our solution instrumentation software is included in the price. You have a little PC in the MIP panel to simulate instrumentation and avionics. So you have no impact in performances in the main PC. A setup to install the Panel 737 Desktop on your computer, three manuals and unlimited support are included in the price too.
Its 19962.20 dollars
How much does it cost
#KrankeScheiße !!! Like 20 Grand
21 grand
19900 CHF.
The price for the MIP, complete pedestal with motorized throttle (trim wheel), sidestick captain console (with tiller)
and the Overhead is 29'800 CHF (About 29'800 USD at today's exchange rates). Shipping and packaging cost aren't included.
With our solution instrumentation software is included in the price. You have two little PCs in the MIP panel to simulate instrumentation and avionics.
So you have no impact in performances in the main PC.
A setup to install the Panel A320 Desktop on your computer, manuals and unlimited support are included in the price too.
You can buy this simulator by contacting us at info@ncinformatique.ch, on Whatsapp +41 79 240 20 25 or directly by clicking this link.
store.ncinformatique.ch/product/panel-a320-desktop-captain/ YYou can pay a deposit with PayPal or Credit card if you order directly online.
how much is it in euros?
That’s so cool
Still available in 2022?
We still have actually in stock a Certified Pre-Owned one of this model. store.ncinformatique.ch/en/product/pre-owned-panel-737-desktop-v2-with-overhead-and-all-options/ Don't hestitate to contact us by email info@ncinformatique.ch
What about Xplane 11?
Where do you buy
Please contact us at info@ncinformatique.ch and send to us your complete address to have a detailed offer including shipping cost.
X plane 11?
No way
Elle est où la boutique ?
Divercraft01 Lausanne en Suisse! il a y un showroom sympa!voici le lien store.ncinformatique.ch/
NewConcept Informatique Merci je passerais y faire un tour
Can Santa bring me this for Christmas? Mommy! Please!?
How much is it in dollars
Says 19,900 CHF which is $19,700 USD. Not sure what your currency is.
i wish this came in dc10
Just asking how much would all cost
It cost 19'900 CHF. The overhead, the software, the scripts, the driver and the trottle are included.
Please send an email to us here to have an offer with detailed shipping cost info@ncinformatique.ch
Very nice!