Piston Pump Tutorial Lowrider Hydraulics
Вставка
- Опубліковано 22 сер 2024
- #tennesseeonhydraulics #lowrider #hydraulics
FOLLOW US ON TIKTOK AT:
vm.tiktok.com/...
FOLLOW US ON FACEBOOK AT:
/ 775197889302991
FOLLOW US ON INSTAGRAM AT:
...
Have an issue you just can’t figure out? Look through the videos listed below and if you still can’t find the answer, contact me directly at:
/ lowriderhydraulicstips
How To Hop with Hydraulics Lowrider
• How To Hop with Hydrau...
HOW TO 3 WHEEL WITH HYDRAULICS TUTORIAL LOWRIDER
• HOW TO 3 WHEEL WITH HY...
How to Troubleshoot Clicking Lowrider Hydraulics
• How to Troubleshoot Cl...
HOW TO LIFT YOUR CAR WITH BAD SOLENOIDS LOWRIDER HYDRAULICS
• HOW TO LIFT YOUR CAR W...
Switchbox wiring diagram HOW TO Lowrider Hydraulics
• Switchbox wiring diagr...
How to Making Hydraulic Battery Cables Lowrider Hydraulics
• How to Making Hydrauli...
How to Cylinder O Rings Leaking Replacement Lowrider Hydraulics
• How to Cylinder O Ring...
How to Hydraulic Motor Replacement Lowrider Hydraulics
• How to Hydraulic Motor...
How to Putting together fittings on Lowrider Hyrdualics
• How to Putting togethe...
How to Frame Reinforcement on 1964 Impala Lowrider Hydraulics
• How to Frame Reinforce...
How to Taking cylinder out of car lowrider hydraulics
• How to Taking cylinder...
How to Basics of hydraulics Lowrider How it all works
• How to Basics of hydra...
How to Switches How They Work 3 6 & 12
• How to Switches How Th...
How to Bleed Lines on Hydraulics Lowrider
• How to Bleed Lines on ...
How to Hardlines tutorial impala Lowrider Hydraulics
• How to Hardlines tutor...
How to Make Hardlines for Lowrider Hydraulics
• How to Make Hardlines ...
How to Impala Hydraulics Install Part 1 Lowrider Hydraulics
• How to Impala Hydrauli...
How to Impala Hydraulics Install Part 2
• How to Impala Hydrauli...
How to Impala Hydraulics Install Part 3
• How to Impala Hydrauli...
Fat Sticks versus Standard Cylinders Lowrider Hydraulics
• Fat Sticks versus Stan...
Gas Hopping How to Lowrider Hydraulics Lowriders
• Gas Hopping How to Low...
How to Replace Dump Seal Lowrider Hydraulics
• How to Replace Dump Se...
64 Bel Air Wagon Build Lowrider Hydraulics Part 1
• 64 Bel Air Wagon Build...
How to figure out what wire goes to what for lowrider hydraulics switchbox • How to figure out what...
How to S10 4 Link with Lowrider Hydraulics
• How to S10 4 Link with...
How to Measure a Cylinder size
• How to Measure a Cylin...
How to wiring with hydraulics
• How to wiring with hyd...
How To Change 4 Switch FBSS to Multiple Function
• How To Change 4 Switch...
How To Power Ball and Polyurethane bushings and install Lowrider Hydraulics • How To Power Ball and ...
Check Valves How To Install
• Check Valves How To In...
2 Pump Standing 3 Lowrider Hydraulics
• 2 Pump Standing 3 Lowr...
Spark Blocks How To Install Lowrider Hydraulics
• Spark Blocks How To In...
Hydraulic Fluid How Much To Add Lowrider Hydraulics
• Hydraulic Fluid How Mu...
Piston Pump Tutorial Lowrider Hydraulics
• Piston Pump Tutorial L...
CLEANING A HYDRAULIC MOTOR LOWRIDER HYDRAULICS
• CLEANING A HYDRAULIC M...
How to ground a motor lowrider Hydraulics
• How to ground a motor ...
HOW TO CHANGE FLUID LOWRIDER HYDRAULICS
• HOW TO CHANGE FLUID LO...
HOW TO INSTALL ACCUMULATORS LOWRIDER HYDRAULICS
• HOW TO INSTALL ACCUMUL...
Changing out Springs Lowrider Hydraulics
• Changing out Springs L...
WHAT TO LOOK FOR BUYING A LOWRIDER HYDRAULICS
• WHAT TO LOOK FOR BUYIN...
ALL LOWRIDERS NEED TO WATCH OUT FOR THIS!! LOWRIDER HYDRAULICS • ALL LOWRIDERS NEED TO ...
LITTLE SECRET LOWRIDER HYDRAULICS HOW TO
• LITTLE SECRET LOWRIDER...
WONT GO DOWN “PRESSURE LOCK” LOWRIDER HYDRAULICS
• WONT GO DOWN “PRESSURE...
FITTINGS SIZES AND STYLES LOWRIDER HYDRAULICS HOW TOO
• FITTINGS SIZES AND STY...
Hydros have come a long way since I've been out of the game, great video.
What if I don’t MOVE THE FUCK ON ..lol great video bro..
Is the piston a form of shock and reason of multiple pump systems i was trying to figure out why they had so many pumps when most things use a single pump or low pressure and high pressure and create multiple functions off the valves
Piston pumps create more force basically because of the added psi behind the piston. It’s not like a shock.
The pistion plunger inside which way faces what? I see there is to sides one with a big indention and the other side with the very small intention which side faces the fill plug
Good tutorial homie. I was wondering if you were going to show the differences between the #9 and #11 gear head on the truck? But still 👍 👍.
Hell yeah you answered my previous question, Great video
Question , ? Isn’t the plunger suppose to be the opposite way ? I was watching the hoppos video and they installed the opposite or does it matter? Thanks Great Video
I think Hoppos has it the wrong way? I sure would like to know.
My piston pump has 2 air valves which one do I use to fill with air
You start buy putting psi in the one on the block, let out the air on the back side of the pump to reset the piston. Let air out of the one on the block, then fill the one on the end of the tank.
Are hard lines good for hopping? I’m wondering
If the pressure would be greater then a hose
Hard to answer because the inside diameter of hard lines is smaller on 3/8 stainless so it restricts a little. You can jump to 1/2 but you end up creating more room for volume or standard rubber hoses.
Thanks for help
Can you put hydraulics on my truck when i pull my
Yacht it sets to low
Awesome. Thank you
What’s the difference between piston vs none and what is better and and
What is rhe difference on pump head and what is the ultimate pump head and for front of. 63 Impala I currently have a hoppos set up but only 2 pumps and want to make the 2 for rears and get one new ultimate best of the best pump for the front and also adex dump if it’s worth it please help you seem very knowledgeable thanks
No one knows there's one in the front of pump and one on the back of the pump there's no videos on that can u help pls thank u
Thank you
@lowrider punch in hydraulic gear pump explained, on UA-cam, this will give you a good crash course and explain a lot hopefully it helps you out ✌️
Hi Russell, I like how you explain about piston pumps, also can you send me info on what accessories I need to buy for the pistion pump just like you have in the video, I plan on putting 2 pistion pump set up in my ride and wanted to know if I can do Corner left and corner right, do I need the adel to go with the piston pump or it's not really need it
Anything regarding the piston pump you need I sell them
Great video! just learning the piston pump myself , can the piston get stuck ? In the tank if it’s not greased up I don’t think my piston is moving all the way back when I load it with 30 psi I do it when the pump is installed in the car does it make a difference if I pull it out like u did thanks
Juan Diaz doesn’t make a difference if it’s in the car or not. When the piston moves at all it is lubricated by the hydraulic fluid so it’s not likely that it is getting stuck. I’d say if it is getting stuck it would be because the tank has a dent in it, otherwise it should be moving. Make sure that when you add the psi to the block that you immediately remove the air from the end of the tank, that should allow it to move all the way back. If you still think you are having an issue, remove the back plate and see if there is anything on the inside keeping it from moving.
That sounds good I’ll try that thanks keep the videos going good information for ppl trying to learn hydraulics
90 240 what ? Air pressure.. realy like ur vedios brotha good stuff learn so much new to the game
Psi of air or nitrogen
When charging the piston do I lock the car up fully and then the piston or do I lay the car out?
Laid out
GOOD SHIT TEACH! 😉
Thx for the help
Great video
How long should keep air in the piston once you fill it up? Say you want to fill it up for the weekend, should you take the air out after a certain time period?
There are mixed reviews on this question. It depends on if you are running air or nitrogen. Air has moisture and can corrode over time. Nitrogen is the better option. It also depends on how much you are running. If you are only running 50 psi I’d say you are good to leave it in there but if you are running 150 psi just for hoping, you should probably let it out when not in use. Some people do leave it in there at all time. Letting out the air relieves the system while not in use. It’s up to you.
Just to make sure. You don’t pressure the air side until it’s back hooked up on the car with the air in the oil side bled out right?
Yes
@russell harris what happens if you let all the air out?
The piston just isn’t charged anymore. Not as strong when you hit the switch because it no longer has help.
Great Video
David Baker thank you sir
Cool video
Proper.
where are you located? i need to send my 64 to you
I actually only work on my own cars and club members.
bad ass video..
Tried this and when I shot air into block hydro fluid shot out of the same stem I was shooting air into which I wasn’t expecting. Any suggestions why
Still had pressure on the piston side.
@@LOWRIDERHYDRAULICS I did make sure the air was released on the backing plate before I shot air in the block, but I’m guessing there might of been a little in there because that makes sense. Thanks
For The Shits and Giggles 💯💯
what the best # gear for a pro hopper g series pump
Juan Pena #13
Depends on several factors, how many batteries, what size hoses, cylinders and so on.
TIGHT video