Alsways drill out the holes in the fibre glass or aluminum just a tiny bit using a larger drill bit. This way you create a cavity to give the sealant a place to sit in. Also rather use butyl tape than kit.
I received my Trim tabs and tried to install them but I can’t get the straight line to have de 3 screws triangle shox deck flat on the boat and align with the fixing plate , why ???
Jonathan, sorry to hear you are having trouble with installation, you can send a me a short video or few pics through my email in about section of my you tube, this will help me visualize your situation. I would also suggest to call their customer service, they are helpful
@@thomasdonoghue9073 hi , yes ! First , fix the trim tab at the bottom. Then fix the 3 screws of the shox triangle to the boat separately. When both of them are screws and solid , you can connect back the shox with the tabs with the little metal key . Don’t be afraid to push hard and bend it a little bit so it can be aligned and push the key in the hole to locked it .
like if I would need 5 degres more Angle of the 3 screws deck the make it flat on the boat , I now did two more hole at the end to gain a bit of more angle but specially when I open the shox , if I screw 3 screws it will break for sure because I can’t get a straight line
@@FKCamVlogs yes it worked! I didn’t know that it was that solid , so I bend it a bit to get the right angle . First it was on the third hole at the end of the tab and it was not doing nothing . So I change it the the first holo and now I feel the difference on the water , but it still porposing a little but like 60 % less . Do you think a need bigger tabs ? I have 6x8 “ now , on a 18 foot seadoo challenger . The porpoising before was terrible at full speed ..
First like mashallah excellent superb job good morning 🌅🌻🌹
Thank you so much
Great work my friend. So beautiful boat. My best wishes from Greece
Thank you very much!
Great job with the install. Wish you would follow up with how they perform.
Yes I will definitely do a video. Thx !
@@FKCamVlogs Any updates?
@@Vickthis I don't like them. I will be installing Electric Trim Tabs
This Amazing Wonderful Soo Cool. Really too Good! Thanks for sharing with us! Stay Connected! 🤗🤗🤗😍😍😍
Thank you! Cheers!
Wow Really Amazing Informative This Your Video That's Great! Thanks for sharing with us! Keep it up Good Job! Stay Connected! 😍😍😍😍😍
Thank you, I will
Super sharing.great job stay blessed dear old friend
Thanks for visiting
Wow Amazing Wonderful Video I love! Thanks for sharing! Stay Connected! 🤗🤗🤗😍😍
Thank you, I will
Superb work my friend
Thank you! Cheers!
Alsways drill out the holes in the fibre glass or aluminum just a tiny bit using a larger drill bit. This way you create a cavity to give the sealant a place to sit in. Also rather use butyl tape than kit.
Thanks for your tip
What is the benefit whit that. Improve the planing?
Yes, keeps boat comfortable to ride. Better than hydrofoil
Very useful video 👍superb work
Thanks a lot
I received my Trim tabs and tried to install them but I can’t get the straight line to have de 3 screws triangle shox deck flat on the boat and align with the fixing plate , why ???
Jonathan, sorry to hear you are having trouble with installation, you can send a me a short video or few pics through my email in about section of my you tube, this will help me visualize your situation. I would also suggest to call their customer service, they are helpful
Hi jonathan did you find a fix to this problem? I’m having the same issue. Very disappointing.
@@thomasdonoghue9073
hi , yes !
First , fix the trim tab at the bottom.
Then fix the 3 screws of the shox triangle to the boat separately.
When both of them are screws and solid , you can connect back the shox with the tabs with the little metal key . Don’t be afraid to push hard and bend it a little bit so it can be aligned and push the key in the hole to locked it .
@@jonathanlapierre5254 thank you very much, i only realised it has a bit of flex in it. I will finish fitting them tomorrow 👌
like if I would need 5 degres more Angle of the 3 screws deck the make it flat on the boat , I now did two more hole at the end to gain a bit of more angle but specially when I open the shox , if I screw 3 screws it will break for sure because I can’t get a straight line
Jonathan did it worked? I replied to your other comment few days ago.
@@FKCamVlogs yes it worked! I didn’t know that it was that solid , so I bend it a bit to get the right angle . First it was on the third hole at the end of the tab and it was not doing nothing . So I change it the the first holo and now I feel the difference on the water , but it still porposing a little but like 60 % less . Do you think a need bigger tabs ? I have 6x8 “ now , on a 18 foot seadoo challenger . The porpoising before was terrible at full speed ..
I think bigger will help, their customer support is very helpful. I will do some research and get back with you.
I just checked their site, 10" is recommended for boats from 17-20 foot
@@FKCamVlogs
ok thanks,
I heard smaller and faster boat = smaller tabs 🤦🏻
good sharing.
Thanks for visiting
really like it
Thanks !
very usefull
Thanks !
Nice fd
Stay connected