Knowledge is Power. Much Respect unto you Bro. I have a Hyundai Tucson 2018. I was on the Highway and I started loosing Power. I exit the Highway pull into a parking lot. Realized my oil was extremely low. I put in the required amount of oil. Stared the Vehicle and I got a heavy Vibration rambling. I pull into the Auto Zone got a Check from one of the Representatives. Report stated the Knock Sensor was bad. I started driving home. I was literally Crawling down the Road. Oh Man I know I annoyed lots of people While trying to get home. Anyway I made it home. That’s what Brought me here. This Brother knows his work. Like myself I’m a Free Lance Electrician. I was going true video after Video. Looking for someone to explain to me why my Hyundai Tucson 2918. Doing what it’s doing. Not one of the other Videos give me an explanation. This Man Provided explanation after explanation. On this topic and other related topics. Continue Shearing the Knowledge Bro.
This guy is awesome articulates well knows his stuff doesn't stumble and fumble around trying to explain something best repair video I've watched yet you rock thanks so much for making this one❤
Thank you for such a helpful video. Everything was explained very clearly. Concise and to the point. I am not a certified mechanic, but lord knows I have worked on all of my cars within the last 60 years of my life and can say that this video was right on! Thank you so very much!
I own a 2018 Honda Pilot EX-L bought it in 2021. Earlier this year while I was driving it couldn't catch speed while my foot was on the gas pedal the RPM's would go up almost oast 4 and then it felt like someone hit me from the behind. Took it to auto zone, my mechanic and even a Honda dealership but none of them found any codes nor would any check engine lights pop up on my dash. Honda performed a flush and I haven't felt anything was off but it's still difficult to catch speed. There is a fuel pump recall but Honda performed diagnostics and they said there was no problem. I don't know what to do as I have no experience with cars except for all the basic knowledge an auto owner should know. I'm also good with oil changes and and all liquid checks. I live in Southern California so no crazy weather to factor into all that.
Update: So I took my car in for diagnostics and it turns out it's internal failure in the transmission. Long story short had to replace the transmission and cost me 8 g's! There is currently an active recall for the torque converter on Honda Pilots so get that checked. Service Recall #23078 (torque converter Honda Pilot)
first off want to say all i had to see was you under the car in the first 5 secs you are the goat bro i just wanted to confirm looks like i got some work to do now on my Integra😢
2011 Nissan Quest. 116,000 miles. Getting intermittent dash light that says "Brake" and shows a battery symbol. Battery is new. Alternator and wiring checked by a shop and i was told they are fine. Can drive the van a couple miles or many miles with no issue until, seemingly randomly, I'll try to accelerate from a stop and I'll get no power. No revving sound. No RPMs. Once in park however, it will rev and show RPMs. If I shut the vehicle off it won't restart until I let it sit quite a while and then it can be turned back on. Radiator and thermostat replaced 2 weeks ago due to shop claiming this issue was caused by a leak and overheating yet the issue is still present and same as it was prior to the repair. Checked the air filter which looks good. Also checked transmission fluid which looks good. I'd appreciate any other advice you may have to save me another huge repair bill or having to get rid of the vehicle.
Check your battery with a multimeter, put it on 20 V/ and if it’s less than 11 it’s the battery. You could also try to replace the alternator fuse, which is located in the fuel box. If its non of those, it’s the alternator.
My issue I’m having is . My car will drive and accelerate but out of nowhere my car will be cruising and I’ll try to speed up but my rps won’t accelerate anymore and the rpm’s will hardly move … but engin is running but I slow down and pull over and restart car and I’m good … help
I have the same issue I have a 2005 ford taurus I drive for 4 miles and or pull over restart car and I'm good recently repaired po171, po174, po1405 in which turned out to be erg pressure sensor replacement, vacuum line replacement, and 3of 6 fuel injectors , with , four new 02oxygen sensor ; and still same issue 😅
if you have no check engine light and it still lack of firing and grab clear jar and pull fuel line from tank to filter and pour in jar and leave it few hours and come back and check it if you see clear under yellow and yellow above clear it mean you got water in tank it time drop tank and replace fuel but you cant get hose in gas nozzle because 1990 above have trapper on tank between hose and fuel tank basics is check oils make sure have enough oils in pan alot time no oils it burn engine out cause it misfire and blowby (alot of air coming out of valve cover) and transmission fluid good and check air filter make sure not clogged or dirty and check for hose air leaks ( sound like hissss when rev engine up ) if no noise them move on to fuel filter and check fuel and if no water clear colors them replace filter if still misfire no check engine light them take flat belt off and check for any worn or stuck drive belt pulley like alternaro or water pump or ac or else on engine if no them pull vent hose off intake go to valve cover and start up engine if you you feel alot of air blowout not suck back in them issues with piston ring shot or wall just save yourself a headache i been working ton of car n truck and i get called almost every day about car or truck ( if you own gm truck like chevy or gmc them you have bad cam and bad push rod roller because GM refuse recalls)
Super helpful. I just got an 99' 4runner V6 and was running slower then when i had my 03 Tacoma V6. So, ill try and check those out you mentioned. Thanks
You can’t ever rely on sensors throwing codes. GM vehicles seem to have pretty wide error ranges before you get a code. Even if you do get a code, it doesn’t mean the part that through the code is faulty, it could be a sensor or another part all together has failed.
I have a code P2122. I took off the APPS(with the accelerator pedal)and unplugged the connector. I tested the terminals and of the two wires that bring in 5 volts from the car side connector, only one is providing sufficient voltage. Don’t see bad wire issue but still could be the case. Maybe computer is purposely not sending voltage due to other issue. Car accelerates good until you need to quickly accelerate like when on the on-ramp entering an expressway. Then it won’t give acceleration needed. Computer seems to be handling all other functions just fine. This problem is not the sensor on the pedal (APPS).
My gas pedal needed to step deeply to accelerate easily it was not like that when i 1st bought it. I have Yaris Cross and it only been 5th day since i bought it. The cause is when I was about to get out of the parking and i was in reverse not knowing it the digital handbrake is on. I though there was a little humps that is why it didn't back out easily, after humping the 5th time, only then i realized it and undo the hand brake. Now my Gas pedal needs to step deeply to accelerate, unlike before it was so sensitive that only a little step it accelerates quickly. Any advice on what do to restore it? Can it be fix easily or do i need to consult a mechanic right a way? I highly appreciate your response and answers. Thank you
I have a 2009 chevy cobalt. It's been running fine; I keep up the regular maintenance. Tonight, I was stopped at a stop light; when I pressed the gas pedal the car didn't want to go. After a couple minutes, it started to move. There was no check engine light. Help!
My car struggle so much to get in speed like when I accelerate and goes to 60kmh so hardly and sounds so much to go over 60kmh even it happens at 40kmh
So I need help. I have a 2008 Impala and when we was driving, I accidentally put it in park and pulled over shut the car off and sat for a hour and now the car will start, but it will not move. What do I do?
I was loosing acceleration and notice fluid splashing from front of my chargers hood and after safely parking i notice fluid spill on the radiator and ac condenser area was purple in color and i believe is transmission fluid.
I have Vento TSI with DSG Gear box. One day, the entire tire got submerged in flood water while it was parked in the parking lot. Due to this the gear lever was not moving from parking. P was flashing in the dashboard. I saw a video on you tube in which it was told that after locking the door of the car from inside, turning on the ignition, pressing the gas pedal for 30 seconds and then starting the gear box gets reset, do the whole process as told. Gave. After starting, the gears did not shift properly but there was a rattling sound and the engine noise started getting louder. R.P.M. They last longer and also have a slight vibration. Please tell what should be done to normalize RPM? Why has the engine started making more noise? After submerging in flood water and before the above process, the RPM and sound of the engine was like a brand new car. Please help me.
If a car is submerged in water, many of the electronic systems could be compromised, not to mention water getting into the actually motor. I would start by changing the oil and the scanning for trouble codes to hopefully track down specific electrical issues
My moms 2010 charger v6 at full throttle wont rev up much wirh loud ticking and not so normal exhaust smell. Im stuck on thinking the head gasket went.
2008 Sonata. Engine not running well. Have to sometimes start it a couple of times before it will run. When running I have to feather the gas pedal when coming from a full stop or when going very slow in order to keep the engine running. After it picks up speed the engine will accelerate fine but it feels like a cylinder may be misfiring every so often. Any idea what's causing this?
I have a problem with 02 sentra ser spec v out of no where loses response on the pedal i shut it off start it back up and works back to normal starting to do this more
4x4 Turbo diesel.. engine idles fine, get a clacking sound only whilst accelerating. Once up 2 speed foot off no sound. Replaced exhaust, but not the Cat. Recently serviced (PLEASE/HELP)
@budgetmechanic I have the same problem but intermittently in the Honda City 2007 zx variant. Got the spark plug serviced a few months back. But again this problem starts occurred. Any suggestions
My problem is I would press the gas pedal, RPM would raise but it would drive slow( 20mph the most). It would also jerk a little as I press the gas pedal a little. Another bid factor!, a burning smell would be in and around the car🫠.
Here's a question You said about the slipping transmission. But what about having those symptoms of it slipping exactly as you said but it's not actually slipping. I ask because I have this problem and I changed the transmission but it didn't cure it.
Map air flow sensor mine did the same thing I thought my cat or the worse the Trans, I started with the cheap part bam a 30 dollar part depending on the year make model mine was 100 3800 series 3 best engine ever made but yah I got the cat code also and it wasn't the right part go with the map air sensor I couldn't hit 30mph good luck also check the throttle body that can do it also do not even move the butterfly it will ruin the who part have some press the gas pedal and look if it's dirty and won't close because it's all Carb up easy clean I did it my self chic if that matters lol
What about when you hit the gas, no acceleration for a few seconds, then a gradual increase in speed. BUT, can reset by turning the engine off then on again. Happens again later in drive. This only happens in weather 50 degrees or greater. Never get codes either.
I simply bypassed the heater core on my antique 4 cylinder Nissan truck and now it only gets 8 miles per gallon..... Temperature gauge is fine and has plenty of power
@@BudgetMechanicHawaii I checked the vacuum lines about an hour ago I don't see anything unplugged but I put the bypass about 11" lower down than were at previously was... There was only 1 vacuum line in the way And I never disconnected it because I never changed the heater hoses they're hard to get to Going into the engine block.... I also disconnected the air conditioning and captured all the Freon on the same day that I put on the bypass.... The belt drive to the air conditioning has been removed for years... It's an older truck but It was a full tank just 2 days ago and now it's half a tank and I just went to the auto parts store a couple of times which is only 2.2 miles away... I went to McDonald's a couple of times that's about it Maybe drove about 36 miles and used 1⁄2 a tank again
My 09 Matrix (220,000) sometimes runs great, I'll stop and then restart it, and it runs horrible. It throws a multiple misfire codes in cylinders 1 and 2. Clear codes restart, and it runs great, revs to 6000 RPM, starts right up, for A few rides then it happens again.
Not always true dude whatever the computer says can sometimes be a closer step to knowing what could be the issue to cause that code like for instance, my 2005 Nissan Titan has no response at all. I lost it when I was doing a race. It set off a code saying throttle pedal accelerator position sensor. The other code was throttle body sensor and mines electronically controlled so I replaced both of what it said codes are still there replace the fuel pump issue solved. All codes went away had response again but it started right up and ran great just weak fuel pump. They don’t just go bad and not work at all. They become weak they think because it starts to run that is not the problem not always true same with the computer whatever the computer says can sometimes be explain towards what those two codes can be connected to.
I only drove my truck about 2 a month for small errands and it sat for about 5 months in the sun, i live in south west Florida. Can the gasoline from sitting for so long make it shake like if its wanting to shut of and also no acceleration past 15 mph
i was on a doordash delivery and suddenly the acceleration stopped..i looked under the hood and noticed a cable to the throttle broke off, its a plastic part, i tried zip tying it back on but no luck..would that be the issue? im still waiting for a tow
My car is a 2021 Ford Explorer and I’ll explain what happens with it. Sometimes when I want to turn into a main road without stopping it feels like the car doesn’t know how to respond to the throttle for about 3 seconds then suddenly go into gear and accelerates normally. If anyone know what’s wrong with it please come forward. By the way it’s still under warranty.
I have a 2003 honda accord 4 cylinder. When I put my foot on the pedal is slow to accelerate. It likes to fly but when I take my foot off tje pedal it slows down. It seems like it down shifts or something and buzzing noise. As soon as I put my foot back on tje pedal it runs smoothly and speeds up quickly. I'm not great with cars and still learning everything I can I just wanted someone's point of view of it
Hi I got Lexus es350, 2007 model. very clean car, very smooth drive. But when i push the paddle it wont move fast but after may be a second it start moving fast. can you pls guide...
Hi, my throttle is behaving weird in a way that maybe you know the answer to. If I press the pedal from 0% to 100% it's not reacting to the equal amount. Sometimes if a press the throttle 80% to the floor it's reacting like I've only pressed 20% and vice versa. And sometimes I can accelerate up to 60mph and then the car is unable to accelerate further. It stops a for instance at 60mph then slowly loose speed down to 50mph even though I'm giving it 100% gas. First the Error Code showed that there was a problem with the Lambda Sensor but the problem persists even though it's been replaced. no other error codes shown. Any thoughts?
Hyundai accent 2014 my car runs it will accelerate but after running I’ll press the gas again and won’t accelerate lol I checked my filter it looked dirty but not terrible.. thinking maybe throttle sensor or fuel pump. This happened right after I got gas
i need help too . i changed my oil my oil level is perfect, did everything right but the day after, my gas pedal is hard and acceleration is fine but it makes a roaring when im trying to speed up 😟
I am experiencing an issue with my car (Quasqai 2007, petrol, manual). I am unable to accelerate beyond 60-70, and when I attempt to do so, the RPM remains constant, not reaching 70. Despite recently changing the clutch kit as advised by the mechanic, the problem persists. What steps can I take to address and resolve this issue? Pleases
hi,,ANYONE 2012 NISSAN QUEST & past 2 mnths began with a sputer one morning like was not getting fuel,,so i tuned engine off and restarted several times and drove fine for 3 days then it STARTED spuerting again at red lights & i would pull over ,,shutoff & restart & then runs good another 2 days ,,,then RANDOMLY did it for 2 weeks,,NOW idles & stomp gas pedal all good ,,BUUUUUT drive for 40 seconds & sputters like not getting fuel & noww cant go 1 block without having to pullover & restart to go another block,,,ANYONE ELSE hear of this,,thanks!!!! new air filter & see no air leaks anywhere
I have a Nissan cube 2010 I have no check engine light but my car cranks up with ease it will let me rev up my car but after like 2 mins I can step on my gas pedal and my car won’t rev up even when I push it to the floor I changed out the pedal sensor throttle body sensor I need help
Yo BudgetMechnanic, i got a Volkswagen and 10 minutes its running good. After them 10 minutes the rpm starts to go down quick. Took off the high pressure fuel pump and the cam follower got broken, i replaced it and it still doing the same problem. changed the fuel pump too but still🤣🤣🤣...anyone can help?
Will you do a vido on barkes ihad brakes,rotors,and calipers replaced on front brakes now that didn't fix it now my back tire and still front tires are getting hot and smoking and i don't understand why because my back wheels were fine no problem until I had the frount brakes, rotors, and calipers fixed .Do you know what may have caused this problem can't drive because all 4 wheels get hot and smoke
Hi Josh. I need help. 2019 Camaro 6 Cylinder 1Lt. It will crank up fine but won’t drive at all. Recent transmission flush about 2 months ago. Can you help point me in the right direction?
Knowledge is Power.
Much Respect unto you Bro.
I have a Hyundai Tucson 2018.
I was on the Highway and I started loosing Power.
I exit the Highway pull into a parking lot.
Realized my oil was extremely low.
I put in the required amount of oil.
Stared the Vehicle and I got a heavy Vibration rambling.
I pull into the Auto Zone got a Check from one of the Representatives.
Report stated the Knock Sensor was bad.
I started driving home.
I was literally Crawling down the Road.
Oh Man I know I annoyed lots of people
While trying to get home.
Anyway I made it home.
That’s what Brought me here.
This Brother knows his work.
Like myself I’m a Free Lance Electrician.
I was going true video after Video.
Looking for someone to explain to me why my Hyundai Tucson 2918.
Doing what it’s doing.
Not one of the other Videos give me an explanation.
This Man Provided explanation after explanation.
On this topic and other related topics.
Continue Shearing the Knowledge Bro.
my car is reving but does not accelerate
@@kianong342 mine doesnt rev, just moves 10 mps acceleration pedal does nothing
@@Lmohs-02what was the problem mine is doing the same thing ?
What was the problem ?
This guy is awesome articulates well knows his stuff doesn't stumble and fumble around trying to explain something best repair video I've watched yet you rock thanks so much for making this one❤
Thank you for such a helpful video. Everything was explained very clearly. Concise and to the point. I am not a certified mechanic, but lord knows I have worked on all of my cars within the last 60 years of my life and can say that this video was right on! Thank you so very much!
Glad it was helpful!
Thanks for the video..
I have a ford ranger ,it cranks but no start..there's no feed to the injector nozzle.. Why is that?
1. Clogged fuel pump - fuel pump test kit
2. Clogged fuel filter
3. Clogged air filter
4. Mass Air flow sensor - unplug maf and see how it runs
I own a 2018 Honda Pilot EX-L bought it in 2021. Earlier this year while I was driving it couldn't catch speed while my foot was on the gas pedal the RPM's would go up almost oast 4 and then it felt like someone hit me from the behind. Took it to auto zone, my mechanic and even a Honda dealership but none of them found any codes nor would any check engine lights pop up on my dash. Honda performed a flush and I haven't felt anything was off but it's still difficult to catch speed. There is a fuel pump recall but Honda performed diagnostics and they said there was no problem. I don't know what to do as I have no experience with cars except for all the basic knowledge an auto owner should know. I'm also good with oil changes and and all liquid checks. I live in Southern California so no crazy weather to factor into all that.
Update: So I took my car in for diagnostics and it turns out it's internal failure in the transmission. Long story short had to replace the transmission and cost me 8 g's! There is currently an active recall for the torque converter on Honda Pilots so get that checked. Service Recall #23078 (torque converter Honda Pilot)
I have a 04 Camry and the check engine is on but it won't accelerate thanks for the info I will try the code reader see if head gasket is the issue
You are the man! Your videos are so helpful dude please keep up the good work!
Thanks, will do!
first off want to say all i had to see was you under the car in the first 5 secs you are the goat bro i just wanted to confirm looks like i got some work to do now on my Integra😢
I'm checking the easy things first thanks Bro you were a big help 😊👍
2011 Nissan Quest. 116,000 miles. Getting intermittent dash light that says "Brake" and shows a battery symbol. Battery is new. Alternator and wiring checked by a shop and i was told they are fine. Can drive the van a couple miles or many miles with no issue until, seemingly randomly, I'll try to accelerate from a stop and I'll get no power. No revving sound. No RPMs. Once in park however, it will rev and show RPMs. If I shut the vehicle off it won't restart until I let it sit quite a while and then it can be turned back on. Radiator and thermostat replaced 2 weeks ago due to shop claiming this issue was caused by a leak and overheating yet the issue is still present and same as it was prior to the repair. Checked the air filter which looks good. Also checked transmission fluid which looks good. I'd appreciate any other advice you may have to save me another huge repair bill or having to get rid of the vehicle.
Check your battery with a multimeter, put it on 20 V/ and if it’s less than 11 it’s the battery. You could also try to replace the alternator fuse, which is located in the fuel box. If its non of those, it’s the alternator.
It’s most likely your alternator if it’s showing Battery and brakes light.
My issue I’m having is . My car will drive and accelerate but out of nowhere my car will be cruising and I’ll try to speed up but my rps won’t accelerate anymore and the rpm’s will hardly move … but engin is running but I slow down and pull over and restart car and I’m good … help
What sensor could cause that. ?
have the same exact issue man
@@BandaEstrellaDeGto did it just get cold where you stay !?
I have the same issue I have a 2005 ford taurus I drive for 4 miles and or pull over restart car and I'm good recently repaired po171, po174, po1405 in which turned out to be erg pressure sensor replacement, vacuum line replacement, and 3of 6 fuel injectors , with , four new 02oxygen sensor ; and still same issue 😅
What was the problem
if you have no check engine light and it still lack of firing and grab clear jar and pull fuel line from tank to filter and pour in jar and leave it few hours and come back and check it if you see clear under yellow and yellow above clear it mean you got water in tank it time drop tank and replace fuel but you cant get hose in gas nozzle because 1990 above have trapper on tank between hose and fuel tank
basics is check oils make sure have enough oils in pan alot time no oils it burn engine out cause it misfire and blowby (alot of air coming out of valve cover) and transmission fluid good and check air filter make sure not clogged or dirty and check for hose air leaks ( sound like hissss when rev engine up ) if no noise them move on to fuel filter and check fuel and if no water clear colors them replace filter if still misfire no check engine light them take flat belt off and check for any worn or stuck drive belt pulley like alternaro or water pump or ac or else on engine if no them pull vent hose off intake go to valve cover and start up engine if you you feel alot of air blowout not suck back in them issues with piston ring shot or wall just save yourself a headache i been working ton of car n truck and i get called almost every day about car or truck
( if you own gm truck like chevy or gmc them you have bad cam and bad push rod roller because GM refuse recalls)
Wow. That's all I can say to that. Wow. I need a nap after reading your comment.
@@usernamenotmyname4809 sound like ton of work hit you into head like list of 200 thing u need todo u be like brain aches
Super helpful. I just got an 99' 4runner V6 and was running slower then when i had my 03 Tacoma V6. So, ill try and check those out you mentioned. Thanks
You can’t ever rely on sensors throwing codes. GM vehicles seem to have pretty wide error ranges before you get a code. Even if you do get a code, it doesn’t mean the part that through the code is faulty, it could be a sensor or another part all together has failed.
Hole in intake or exhaust manifold. And lambda dirt from lean mixture its work give correct signal to ECU. Died bearing in gear box.
I fixed lack of acceleration in the car specially on highways or motorways by replacing the blown up break tail bulb. Nissan Primera 2004
Most common on nissan, esp murano, brakelight switches and relay. If they malfunction the car will not accelerate, it can be sporadic.
I have a code P2122. I took off the APPS(with the accelerator pedal)and unplugged the connector. I tested the terminals and of the two wires that bring in 5 volts from the car side connector, only one is providing sufficient voltage. Don’t see bad wire issue but still could be the case. Maybe computer is purposely not sending voltage due to other issue. Car accelerates good until you need to quickly accelerate like when on the on-ramp entering an expressway. Then it won’t give acceleration needed. Computer seems to be handling all other functions just fine. This problem is not the sensor on the pedal (APPS).
Thanks. I think mine is an O2 sensor. Much appreciated.
Hey watching from 🇨🇦 that’s very informative video’s have a a good day dude!
Hey, thanks!
No problem dude happy watching your videos.
My altima 2014 is lacking acceleration. I've changed all the sensors, and today, i changed the alternator, so I'll update if it fixes the problem
My gas pedal needed to step deeply to accelerate easily it was not like that when i 1st bought it. I have Yaris Cross and it only been 5th day since i bought it. The cause is when I was about to get out of the parking and i was in reverse not knowing it the digital handbrake is on. I though there was a little humps that is why it didn't back out easily, after humping the 5th time, only then i realized it and undo the hand brake. Now my Gas pedal needs to step deeply to accelerate, unlike before it was so sensitive that only a little step it accelerates quickly. Any advice on what do to restore it? Can it be fix easily or do i need to consult a mechanic right a way? I highly appreciate your response and answers. Thank you
Thank you for not talking too fast :) I liked and subscribed :)
I have a 2009 chevy cobalt. It's been running fine; I keep up the regular maintenance. Tonight, I was stopped at a stop light; when I pressed the gas pedal the car didn't want to go. After a couple minutes, it started to move. There was no check engine light. Help!
Dirty fuel injectors
My car struggle so much to get in speed like when I accelerate and goes to 60kmh so hardly and sounds so much to go over 60kmh even it happens at 40kmh
Great video I have done everything and more in this video now I’m thinking loose throttle accelerator cable
So I need help. I have a 2008 Impala and when we was driving, I accidentally put it in park and pulled over shut the car off and sat for a hour and now the car will start, but it will not move. What do I do?
Very helpful video
Great video 😊
I have any check engine light when idling. The moment I give throttle the code comes on
I was loosing acceleration and notice fluid splashing from front of my chargers hood and after safely parking i notice fluid spill on the radiator and ac condenser area was purple in color and i believe is transmission fluid.
Thank you so much, very helpful video
You are welcome!
I have Vento TSI with DSG Gear box. One day, the entire tire got submerged in flood water while it was parked in the parking lot. Due to this the gear lever was not moving from parking. P was flashing in the dashboard. I saw a video on you tube in which it was told that after locking the door of the car from inside, turning on the ignition, pressing the gas pedal for 30 seconds and then starting the gear box gets reset, do the whole process as told. Gave. After starting, the gears did not shift properly but there was a rattling sound and the engine noise started getting louder. R.P.M. They last longer and also have a slight vibration. Please tell what should be done to normalize RPM? Why has the engine started making more noise? After submerging in flood water and before the above process, the RPM and sound of the engine was like a brand new car. Please help me.
If a car is submerged in water, many of the electronic systems could be compromised, not to mention water getting into the actually motor. I would start by changing the oil and the scanning for trouble codes to hopefully track down specific electrical issues
I have a.08 GMC Sierra it has no power in drive at all but good power in reverse? I put new coils in it and still the same
My moms 2010 charger v6 at full throttle wont rev up much wirh loud ticking and not so normal exhaust smell. Im stuck on thinking the head gasket went.
2008 Sonata. Engine not running well. Have to sometimes start it a couple of times before it will run. When running I have to feather the gas pedal when coming from a full stop or when going very slow in order to keep the engine running. After it picks up speed the engine will accelerate fine but it feels like a cylinder may be misfiring every so often. Any idea what's causing this?
You always got a 😊 up. Great job bro
My engine light is on and stability is on too. Has no power. We replaced the ignition coil and spark plugs. My car is a 2013 Chevy Impala LT V6
Was that the problem
What's the code?
Any decent code reader would you recommend?
I have a 2011 honda pilot
TIA
I have a problem with 02 sentra ser spec v out of no where loses response on the pedal i shut it off start it back up and works back to normal starting to do this more
4x4 Turbo diesel.. engine idles fine, get a clacking sound only whilst accelerating. Once up 2 speed foot off no sound. Replaced exhaust, but not the Cat. Recently serviced
(PLEASE/HELP)
When pressing the accelerator pedal hard and the car is stationary, RPM do not go up quickly.
@budgetmechanic I have the same problem but intermittently in the Honda City 2007 zx variant. Got the spark plug serviced a few months back. But again this problem starts occurred. Any suggestions
K i have a2006 lincon navigator and turns on quick but when gas pedal is pressed nothing happens i mean nothing. Its just the sound of the motor
My problem is I would press the gas pedal, RPM would raise but it would drive slow( 20mph the most). It would also jerk a little as I press the gas pedal a little. Another bid factor!, a burning smell would be in and around the car🫠.
How did you fix it
Thank you for your very helpful and knowledgeable skills much appreciated
I had an Oxygen sensor issue for a while but i got it changed. Now its really not trying to move
Here's a question
You said about the slipping transmission. But what about having those symptoms of it slipping exactly as you said but it's not actually slipping. I ask because I have this problem and I changed the transmission but it didn't cure it.
Map air flow sensor mine did the same thing I thought my cat or the worse the Trans, I started with the cheap part bam a 30 dollar part depending on the year make model mine was 100 3800 series 3 best engine ever made but yah I got the cat code also and it wasn't the right part go with the map air sensor I couldn't hit 30mph good luck also check the throttle body that can do it also do not even move the butterfly it will ruin the who part have some press the gas pedal and look if it's dirty and won't close because it's all Carb up easy clean I did it my self chic if that matters lol
Mass air flow sensor
i feel like my car relates to the clogged catalytic converter bc i smelled gas in the car when it went out but how can i test when it won’t start?
That day I was driving it couldn't go over 40 mph it just started slowing down
Mine will do that but will push once you let go of the accelerator and there will be a clunking sound underneath the car.
What about when you hit the gas, no acceleration for a few seconds, then a gradual increase in speed. BUT, can reset by turning the engine off then on again. Happens again later in drive. This only happens in weather 50 degrees or greater. Never get codes either.
I would check feel pressure, could be pump
I simply bypassed the heater core on my antique 4 cylinder Nissan truck and now it only gets 8 miles per gallon..... Temperature gauge is fine and has plenty of power
That should not effect your mpg! Did you break a vacuum line while you were at it??
@@BudgetMechanicHawaii I checked the vacuum lines about an hour ago I don't see anything unplugged but I put the bypass about 11" lower down than were at previously was... There was only 1 vacuum line in the way And I never disconnected it because I never changed the heater hoses they're hard to get to Going into the engine block.... I also disconnected the air conditioning and captured all the Freon on the same day that I put on the bypass.... The belt drive to the air conditioning has been removed for years... It's an older truck but It was a full tank just 2 days ago and now it's half a tank and I just went to the auto parts store a couple of times which is only 2.2 miles away... I went to McDonald's a couple of times that's about it Maybe drove about 36 miles and used 1⁄2 a tank again
My 09 Matrix (220,000) sometimes runs great, I'll stop and then restart it, and it runs horrible. It throws a multiple misfire codes in cylinders 1 and 2. Clear codes restart, and it runs great, revs to 6000 RPM, starts right up, for A few rides then it happens again.
Did you change plugs and check coil pacs for cylinders 1 2
I’m driving a small ford truck and when I press on the accelerator it doesn’t go as fast and my engine is roaring what could be the problem?
This was so helpful! Thank you
Car won't go forward but reverses, even on flat, there is hesitancy. Could it be the transmission.
Neutral safety switch possibly
My trailblazer won’t go anymore on drive or reverse or any gear car just stopped going one day after work..
honda fit ge6 rolls backwards when u stop whilst going uphill .it will be in drive
Not always true dude whatever the computer says can sometimes be a closer step to knowing what could be the issue to cause that code like for instance, my 2005 Nissan Titan has no response at all. I lost it when I was doing a race. It set off a code saying throttle pedal accelerator position sensor. The other code was throttle body sensor and mines electronically controlled so I replaced both of what it said codes are still there replace the fuel pump issue solved. All codes went away had response again but it started right up and ran great just weak fuel pump. They don’t just go bad and not work at all. They become weak they think because it starts to run that is not the problem not always true same with the computer whatever the computer says can sometimes be explain towards what those two codes can be connected to.
I got a 2012 Toyota Tacoma v6 VTI , this only happened after a oil change
My automatic car starts but vibrates when in gear and won’t move. Accelerator not making raving noise
Possible transmission stepper motor
I have a 2000 century Buick everytime I stop at a stop sign or red light it takes my car forever to take off but it drives perfect in drive need help
maybe i'm paranoid but I was worried there when his right arm was on the red pole and left arm was near the black of the battery...
I only drove my truck about 2 a month for small errands and it sat for about 5 months in the sun, i live in south west Florida. Can the gasoline from sitting for so long make it shake like if its wanting to shut of and also no acceleration past 15 mph
No it will not do that you got another problem on your hands buddy I would get that checked out by a mechanic asap.
It might be in limp mode
I have a 90 Chev Beretta 3.1 car starts runs great but few seconds later like I turn key off for me stumped. Help
i was on a doordash delivery and suddenly the acceleration stopped..i looked under the hood and noticed a cable to the throttle broke off, its a plastic part, i tried zip tying it back on but no luck..would that be the issue? im still waiting for a tow
For something that important you need to replace the broken parts (cables, cable mounts, etc) with proper parts.
If my truck won't go in drive..
You think maybe my rear end gone out?
My mechanic blaming transmission. I cant move from stop light. I have af sensor light but I just replaced the sensor but the engine light returns.
My car is a 2021 Ford Explorer and I’ll explain what happens with it. Sometimes when I want to turn into a main road without stopping it feels like the car doesn’t know how to respond to the throttle for about 3 seconds then suddenly go into gear and accelerates normally. If anyone know what’s wrong with it please come forward. By the way it’s still under warranty.
I have a 2003 honda accord 4 cylinder. When I put my foot on the pedal is slow to accelerate. It likes to fly but when I take my foot off tje pedal it slows down. It seems like it down shifts or something and buzzing noise. As soon as I put my foot back on tje pedal it runs smoothly and speeds up quickly. I'm not great with cars and still learning everything I can I just wanted someone's point of view of it
Maybe a weak fuel pump
Hi I got Lexus es350, 2007 model. very clean car, very smooth drive. But when i push the paddle it wont move fast but after may be a second it start moving fast. can you pls guide...
When you go down and feel your gas pedal does it move around a bit or feel normal?
@@Taylorina8X it’s normal and smooth
Hi, my throttle is behaving weird in a way that maybe you know the answer to.
If I press the pedal from 0% to 100% it's not reacting to the equal amount.
Sometimes if a press the throttle 80% to the floor it's reacting like I've only pressed 20% and vice versa. And sometimes I can accelerate up to 60mph and then the car is unable to accelerate further. It stops a for instance at 60mph then slowly loose speed down to 50mph even though I'm giving it 100% gas.
First the Error Code showed that there was a problem with the Lambda Sensor but the problem persists even though it's been replaced. no other error codes shown.
Any thoughts?
Maybe inspect throttle position sensor
My BMW will start but when giving gas it dies no rpm at all what is that
Check your fuel line and pump
I m having error code P1771 and P1786 in my Mitsubishi Lancer ex, please advise whats need to be repair. Also less power in engine while accelerating
You figured it out bro because same
Mine just did that I don’t know which 1 is wrong with it
Thank you 🙏
Hyundai accent 2014 my car runs it will accelerate but after running I’ll press the gas again and won’t accelerate lol I checked my filter it looked dirty but not terrible.. thinking maybe throttle sensor or fuel pump. This happened right after I got gas
No check engine light is on.
My truck started doing this after I installed a cold air intake idk wats going on.
It's getting too much air not much fuel tuning the ECU might get rid of it
Thanks man. That’s wat I’m doing.
i need help too . i changed my oil my oil level is perfect, did everything right but the day after, my gas pedal is hard and acceleration is fine but it makes a roaring when im trying to speed up 😟
qnd its a hybrid so its mostly quiet but it sounds wnd feels like its struggling
or rough
Thank you bro
O2 sensor sometimes will
do it
Facts
Fax
ECU problem data from sensor goes correct but not reading correct in engine ECU. Blocked injectors dirt into injectors high mileage
Can this happen if i only have that and no motor?
I am experiencing an issue with my car (Quasqai 2007, petrol, manual). I am unable to accelerate beyond 60-70, and when I attempt to do so, the RPM remains constant, not reaching 70. Despite recently changing the clutch kit as advised by the mechanic, the problem persists. What steps can I take to address and resolve this issue? Pleases
Change air dlow sensor
Air flow sensor needs changing
I love you teacher.
Thanks!
Thank you very helpfull idea
Having the same but my obd not connecting
hi,,ANYONE 2012 NISSAN QUEST & past 2 mnths began with a sputer one morning like was not getting fuel,,so i tuned engine off and restarted several times and drove fine for 3 days then it STARTED spuerting again at red lights & i would pull over ,,shutoff & restart & then runs good another 2 days ,,,then RANDOMLY did it for 2 weeks,,NOW idles & stomp gas pedal all good ,,BUUUUUT drive for 40 seconds & sputters like not getting fuel & noww cant go 1 block without having to pullover & restart to go another block,,,ANYONE ELSE hear of this,,thanks!!!! new air filter & see no air leaks anywhere
Change your spark plugs
i have lack of power and my check engine light is a p1607 could that cause the problem? I also have a tcs light on.
Doesn’t sound like fuel pump, google that code
My bmw will start but when putting my foot on the gas it dies I have no power at all my rpm want go up at all what is it
But why does my gas pedal work fine when I shut off my Nissan rogue then I start it up then it works fine
My problem is I press the gas and it won’t go over 3000 rpm and it will slowly go up to speed and it will randomly die
I am also having the same issue but 2,000rpm
Any luck?
Anything I’m under my car rn 😮💨
Mines does/ did the same. I just deleted my cat and it’s better but there somn in the engine that’s the culprit
I have a Nissan cube 2010 I have no check engine light but my car cranks up with ease it will let me rev up my car but after like 2 mins I can step on my gas pedal and my car won’t rev up even when I push it to the floor I changed out the pedal sensor throttle body sensor I need help
This is apparently a very common Nissan issue. Did you figure anything out?
Yo BudgetMechnanic, i got a Volkswagen and 10 minutes its running good. After them 10 minutes the rpm starts to go down quick. Took off the high pressure fuel pump and the cam follower got broken, i replaced it and it still doing the same problem. changed the fuel pump too but still🤣🤣🤣...anyone can help?
I don’t have a air filter box in my g35 is that a problem ? 😂
Will you do a vido on barkes ihad brakes,rotors,and calipers replaced on front brakes now that didn't fix it now my back tire and still front tires are getting hot and smoking and i don't understand why because my back wheels were fine no problem until I had the frount brakes, rotors, and calipers fixed .Do you know what may have caused this problem can't drive because all 4 wheels get hot and smoke
Help me out for when you drive the Toyota sienna 2011 go on the road the noise to loud in front?
Check out our video on noises and see if anything matches
Hi Josh. I need help. 2019 Camaro 6 Cylinder 1Lt. It will crank up fine but won’t drive at all. Recent transmission flush about 2 months ago. Can you help point me in the right direction?
I was on interstate driving about 60 in the overdrive light came on I stopped now the truck is in lamp mode
OD light coming on points to a transmission problem. Check trans fluid level immediately