If you set back the track 19mm, the track is 26mm wide, then the centre of the door will be 19 + 13 = 32mm from the front of the frame. The door is 35mm thick, so when closed it will be set back from the edge of the frame by 32 - 17.5 = 14.5mm. I don't get it! You don't mean the centre of the track (screw holes) do you?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
How do you close the doors from the inside ?
Doorknob goes on both sides
Carefully and shout out to someone if you are trapped.
@@tomasmchugh2612 You can't do that as the two outside faces come together. Any other suggestions?
@@davejones3240 I've used a flush mounted pull ring
If you set back the track 19mm, the track is 26mm wide, then the centre of the door will be 19 + 13 = 32mm from the front of the frame. The door is 35mm thick, so when closed it will be set back from the edge of the frame by 32 - 17.5 = 14.5mm. I don't get it! You don't mean the centre of the track (screw holes) do you?
😊
This video was about as helpful as the written instructions that came with the door.