The Bubbles are a little bit to confuse. Lookin' at the Bubbles is Not so relaxing and the Pump is to loud . The Aquaforte V10 is a little bit more expensive but very very quiet and powerful ... Greatings
I know this was made 5 years ago, so hopefully you're still monitoring your comments... But I have a question, please... Why are the bubnles only to the right side? When watching the video, it appears you made holes all the way along the length of the tube... so how come only one half of it appears to bubble? Is it supposed to do that? Thank you for your time, and for this video! I want to make this for my Mom ❤
What happened to the partitions at 3:15? The bubble wall at the end did not have any partitions. Maybe screwed up the first one, so he made a 2nd wall without partitions, or used someone else's video at the end.
Hi, Thanks for your video. Just wondering why not use "Double Wall" acrylic for this... Pl. share your opinion/view. Water-tightness can be ensured thru sealant and top & bottom lighting will compensate the acrylic clarity... Appreciate if you could respond.
That is simple bro... i made that for this video... i did not included that in this video... if i add that, video length will increase, so i removed 🙏🙏🙏
Hola amigo hablo solo castellano, lo que uno nunca sabe es que bomba de aire usar, ya que no es lo mismo un muro de 1 metro por 1 metro a uno de 50 centímetros por 20 centímetros de ancho, un abrazo desde argentina
Excuse me please could inform me what the purpose of using glue gun in The middle of the glass And While using is it necessary to touch in both glass or only in single glass
Hi love the idea ! I'm going to do it with a picture of a bass fish jumping out of the water..I'm planning for it next year on a hood scoop on my truck...Yes I found a electric door hinge so it will go up right ..Boy it will be some thing ! Check my truck now , extreame fishing truck on you tube : main pic. is a eagle almost on a bass on my seat cover...earlier it was 2nd on youtube... then I found your video.
Why is every video of these things being made include silicone all haphazardly put on and then it looks like shit because it's all exposed through the see-through material.... like where is the frame or making it more straight-edged at least!?!?
Dear Friends...Please Support Our Channel and SUBSCRIBE
ua-cam.com/channels/5c_0oLmjQfC5AzVHbxaiIQ.html
Nice to meet you. Simple aguarium .is good
Thank you.. 🤝👍🏻😍
wonderful love it xo💖👏👏👏👏👏👏👏👏👏👏👏👏
😍😍😍
GOD BLESS, BEAUTIFUL WORK, THANK YOU.
Thank you so much dea...🤝🤝👍😍
Awesome thank you for sharing
Always welcome 😊 thank you 🤝😍
This is brilliant! Thank you for sharing all this.
Welcome dea... Thank you so much for your support 🤝🤝👍👍
Ijin nyimak bosq❤❤❤❤❤👍👍👍👍👍
🤝👍😍😊
Sry sir I late to watch your video... but thanks for the video and I wll trl and pray for me Teacher 🙏
It's ok, we will pray 🤲..... Thank you so much.... 🤝👍👍
Beautiful guess...👍👍👍👍😍😍
Thank you dear..... 😍😍🤝👍👍
GREAT IDEAS 💝
Thank You... 🤝👍😍
Lovely, what pump shud v use ?
Dc aquarium motors...
That is so amazing and the sound is relaxing
Thank you....🤝👍
Хорошая штука. Автор молодец.
Amazing sir.... Thank's from algeria
Thank you so much for your support... Thank you🤝🤝👍👍😍
Super bravo funtastic
Thank you.. 🤝👍👍👍😍
Nice job👍 keep going 🔥🔥
Thank you so much... 🤝👍
Excelente proyecto. Para dos muros de 2 Mt x 0,50mt,la bomba de burbujas de cuantos wts debería ser?
usa un motor pequeño y potente que este ... Gracias
Bhai dono sheeshon k darmiyan mein jo ap ne pipe k sath seedhi 5 layer silicon ki lagayi wo kis maqsad k liye thi aur wo ghayab kesy ho gayin?
The Bubbles are a little bit to confuse. Lookin' at the Bubbles is Not so relaxing and the Pump is to loud . The Aquaforte V10 is a little bit more expensive but very very quiet and powerful ... Greatings
I know someny faults bcz i made this my own ideas without anyone help 🙏🙏 anyway thank you for your opinion 🤝👍
@@CraftVillage subscribed you because you have good ideas
Thank you... 🤝👍😍
Kakka adhiltte led light female adapter use cheydh work cheyyan patto
പറ്റും എന്നാണ് തോന്നുന്നത്
At 2.49 strips of silicone were put on, but they arent there at finish. Plz explain
If you are making same as like this, please don't apply that Glue... 🤝👍
So grace full pleas explain with voice
I will try... 🤝🤝👍 thank you
Nice. Pl inform regarding air pump, whether 2 nos reqd. single nozzle, 2way! Pl may inform.
2way is better...🤝🤝👍
amazing bro
Thank you... 😍😍😍
I know this was made 5 years ago, so hopefully you're still monitoring your comments... But I have a question, please...
Why are the bubnles only to the right side?
When watching the video, it appears you made holes all the way along the length of the tube... so how come only one half of it appears to bubble?
Is it supposed to do that?
Thank you for your time, and for this video!
I want to make this for my Mom ❤
I think the motor power is low, bcz of that.... Anyway thank you... 🥰
Good to know, thank you!
And thanks so much for the quick answer!
I really like your content, so I subscribed to you as well.
Take care 😊
❤️❤️❤️
What happened to the partitions at 3:15? The bubble wall at the end did not have any partitions. Maybe screwed up the first one, so he made a 2nd wall without partitions, or used someone else's video at the end.
Watch ful video 👍🏻
At ceter u used gum where is it
If you are making same as like this, don't apply that Glue in center 🤝👍
Except that sound it looks cool.
Mmm... anyway thank you for your opinion 🤝🤝👍
The noise is one of the best parts for me.
Hi, Thanks for your video. Just wondering why not use "Double Wall" acrylic for this... Pl. share your opinion/view. Water-tightness can be ensured thru sealant and top & bottom lighting will compensate the acrylic clarity... Appreciate if you could respond.
i think better is glass, bcz all time glass getting good lighting efficiancy, also thanks your comments.
А куда делись полоски селикона по средине? И зачем поджигать свечу , если можно от зажигалки заплатить трубочку?
Watch ful video
Ссылка не открывается.
Is partitions necessary inside the glasses...??? Can't we left the full glass as it is
Not necessary inside partition.... 👍👍🤝🤝😍😍
Did you place hole side of local glue(air pump) towards inside or outside? Does it's alignment affect the working
no it;s not affected ...
@@CraftVillage so are the holes facing upwards
I ❤️❤️❤️ IT!
Thank you.... 🤝👍
What happened to the glue lines which you made.
If you are trying to make same as like this, please don't apply tht glue lines... ok thank you🤝🤝👍
Verry good ideas . How to meck ❤️❤️❤️❤️❤️
Thank you dear... 🤝👍😍😍
What's the silver kind of thing at the bottom of the stand?
I'm not talking about the strip lights.
That is a aluminum sheet... thank you 🤝🤝👍😍
What's the aluminum sheet for
And what the lines on the glass for
Can I use hot glue in place of silicon
Not work... use silicon 🤝🤝👍
Ganhou mais um inscrito .
Obrigado... 🤝👍😊
Centre glue was hidden bro ... it's my doubt only other wise owsem....
If you are making same as like this... Don't apply that Glue in center... Ok thank you... 🤝👍
What is the purpose of the lines of glue in the center?
at last removed that glue bcz when glue apply in center the bobble wall not working smoothly. if you making same as this you dont use that center glue
@@CraftVillage yeah but still..why?
How many watts did you use for the air pump?
Hey can u help me out how to make stand ? If u dnt mind
What stand bro...?
This video one water fountain base stand
That is simple bro... i made that for this video... i did not included that in this video... if i add that, video length will increase, so i removed 🙏🙏🙏
Okay
How to clean it ?
Use small form.... or stick
I want make this with toughened glass is it possible
Yea, please try to make one... 🤝👍
How much this one
Total cost under 300rs
Bhi ager apne har chijo ka Nam batate to hum log ko samajne mea or asni hoti
हाँ, हम वीडियो विवरण बॉक्स को संपादित करने का प्रयास करेंगे
How to clean ?
Easy to clean, use a small type painting brush... 🤝👍
I would suggest using plexiglass instead of regular glass as regular glass will break usually within about a month and plexiglass wont
better use acrylic glass...
@@CraftVillage plexi glass is also knows as acrylic glass m8 :)
Hola amigo hablo solo castellano, lo que uno nunca sabe es que bomba de aire usar, ya que no es lo mismo un muro de 1 metro por 1 metro a uno de 50 centímetros por 20 centímetros de ancho, un abrazo desde argentina
🤔🤔😊
@@CraftVillage amigo debes usar el traductor de idiomas para responder I SAID FRIEND YOU SHOULD USE THE LANGUAGE TRANSLATOR TO RESPOND
❤️
Excuse me please could inform me what the purpose of using glue gun in The middle of the glass
And While using is it necessary to touch in both glass or only in single glass
Important question 🤝🤝👍 that is not necessary dear... if you make this make without apply that glue middle of glass
@@CraftVillage So why did you put glue in the middle?
@@deegee4264 🙏🙏🙏
@@CraftVillage ??
Galti sy bana di bhai ny. Maafi dedo😂
Nice Work... Can u make one for me... Tell me wht would b da Price...
This is simple method.. please try to make same one... thank you 🤝🤝😍👍
@@CraftVillage thank u sir
Does the water pump make any noise?
no dear...working smoothly
@@CraftVillage Thank you. If you make a nice wood frame you can hide corner silicones. Than it could get clean and more expensive look.
One is silicon glue and another one is?
Nd other one is local glue gun
Can you build a larger version of this like a 75'' tall 60'' wide?
yaa...
@@CraftVillage Yea you start your online company atleast and sell custom versions. I would want to buy one from you.
@@shiningforce9033 i think this is one of the best product... let me try :)
What is the purpose of the lines of glue down the center?
@Kathy Kandel, If I am not wrong they are just for a systematic bubble effect, see for a programmed Water Bubble Acrylic Wall...
What is the Glass thickness ??? Glue name please.
5mm glass, and you can apply any cylicon Glue... 🤝👍
@@CraftVillage can we able to use Hot gun glue ?
No, that not secure...
@@CraftVillage thanks
@@CraftVillage thankq sir
Super
Thank you...🤝🤝👍
What kind of water is that?
Normal water i used.... 🤝🤝👍👍👍
@@CraftVillage sir aapne glass ke bich me glue lagaya h uska b koi thickness hai kya .mota ya ptla
@@Rsblooming if you are making same as this please dont add that glue
Bubble speed should be very slow for better effect.
Yea🤝🤝👍😊 thank you for your opinion..🤝👍
Beautiful project. How can i clean the glass? I mean inside, and how often should I change the water?
The upper side not closed, u can clean from there.... thank you 🤝🤝👍👍
Better add bleach to the water so it stay clear all year round, no need for cleaning,the bleach will do the water for you
Wt material uses where write that also
Sure i will try to edit description.... thank you🤝🤝👍
Muttey ne oru sambhavama
😍😍🙏
Village craft... How much cost it is for 40"horizontal to 5" vertical???
around 1500rs only
@@CraftVillage thanks.. I will contact you soon
How to build a 7 feet by 4 feet
@@ramboreco95 follow this method and use 4mm glass for more safety...
Sir ap kaha se ho hm b bnwana chahte h full wall pr ye
منظر جميل أنشأت مثله الا اني واجهت عودة الماء عبر القناة البلاستيكية.هل حصل معكم نفس الشيء
Please try to ask in English 😊😊😊
It would be lovelier if it was silent. Just poetry in motion
😊😊😊
The noise is one of the best parts for me.
Can i use acrylic ?
ohh sure...use above 4mm
@@CraftVillage
Why use above 4 mm acrylic ? I have .093 mm will it work ?
@@CraftVillage but will silicone sealant will work in acrylic ? Will it bounds perfectly ?
@@akshaymurteli4473 yea dont worry..
Beautiful but too loud
😊😊😊 thank you
03.00 you maked some line from glu e gun in the middle. but after finish the project i didn,t see
If you are making same as like this, you don't do that glue line... k thank you🤝🤝👍
@@CraftVillage Thank you sir
C'est quel genre de moteur aviez vous utilisez pour le buble wal
I want this aquarium water bubble
This is simple method.. please try to make same as this... 🤝🤝👍😍
WHAT TYPE OF GLASH SOULD I USE FOR IT?
normal type class
Acrylic sheet is good for this(unbreakable)
Is awesome but a little bit noisy
I shooted this using ma mobile so that dirty noise 🙏🙏🙏 this is supper one. Anyway thank for your opinion 🤝🤝👍👍😍
Price
Under 500rs.... thank you
Thanks 😊
Always welcome 😊
Nice
Thank you...🤝🤝😍
Y LAS LÍNEAS DE SILICON A LO LARGO... DONDE QUEDARON?... 😤
NO TE SALIO EL INVENTO...
Si esta haciendo lo mismo que esto, haga sin esas lineas de silicona🤝🤝👍
Thank u so much
Welcome dea...
Thank you
Welcome dear...🤝🤝👍
Hi love the idea ! I'm going to do it with a picture of a bass fish jumping out of the water..I'm planning for it next year on a hood scoop on my truck...Yes I found a electric door hinge so it will go up right ..Boy it will be some thing ! Check my truck now , extreame fishing truck on you tube : main pic. is a eagle almost on a bass on my seat cover...earlier it was 2nd on youtube... then I found your video.
thank you so much....good luck brother.
I want bigger then this.
K, make Same as like this... All the best..🤝👍😍
@@CraftVillage OK. I will try. Thanks 🙏
😍
Hello cv plz can u make for me it's request I really like this for my living room plz bro send ur g pay plz don't mind . Superb art
Plz brother
I'm sorry bro... It's not for sale... 🙏🙏 thank you
exelente
Thank you dear.... ❤️
Why is every video of these things being made include silicone all haphazardly put on and then it looks like shit because it's all exposed through the see-through material.... like where is the frame or making it more straight-edged at least!?!?
Better for protect water leeks, so all they using silicon...
Perfectly said ! Mr Scott
👍🇹🇷
Thank you... 🤝👍
👍🌹🌹
Thank you... 🤝🤝👍👍❤️❤️
Yg besar bang
😍😍😍
The noise of it has put me off
😥😥😥😭😭😭
It sounds like most indoor fountains.
@@RuinedTemple yea may be...
welcome to graffiti 😊
Thank you...🤝🤝👍😍
This is not that wat u shown first
🤔🤔
Not good
It's k, anyway you wrote your opinion 👍👍 thank you 🤝🤝😊
no good
Its k, any way thank you..!
Not perfect. . 👍
It's k... thank you. 🤝🤝👍
Water will flow from bottom ?
No. Never 🤝🤝👍 thank you
Super
Thank you....🤝👍