I need to build one!! Do you guys have a parts list on any of your videos? I'm new to this and not sure what I would need besides frame and 212 motor lol
@@thehoperanchchannel4950 Yes I started building one here in the Bahamas a couple of years ago. But got tied up in politics. If I were to send you a new mini quad this spring how much would you charge me to swap the engine for the same 224cc you placed in yours?
"Build it to hurt yourself" is an understatement, that Wipeout after the jump was epic. Great video, great Build. Very entertaining and learned a few things
Hi I'm building a 224, I'm just wondering if the parts I got for it wont blow it up, what I already have on it is a governor delete, oil censor delete, cast aluminum fly wheel rated for 10k rpm, billet rod, 18lb valve springs and a mikuni clone round slide. I ordered a .01 head gasket, 22lb valve springs, and a 265 hot cam. ill do the necessary clearancing, but I'm just wondering if I need anything else for my setup to run reliably.
@@thehoperanchchannel4950 I do have it jetted, and now that you mention it I should get a fuel pump, but everything else is good? I'm new to this and don't want it to blow up on me, thank you though
Just remember anything ungoverned has a possibility to blow up, just don't hold it wide open too long. And jet size will change with different parts and weather
6" wheels and tires. Don't know the brand of any of them. The blue one was pretty modified, we cut the uprights down about 3" and flattened the top frame rails to fit the flat seat she wanted and stretched the swing arm 3"
First predator build I’ve seen that actually has power 💯
It’s not about the engine it’s all about the cluch
Yup. Just what every full growed up man needs. 😮
We think so.
@@thehoperanchchannel4950 I think so too
Wow the way you just took off I’m jealous
Fantastic!!! I am inspired at how you built everything from swing arms to the front suspension. Thank you for sharing
Thanks for watching !!
Hell yeah man! Looks like a ripper. I love my built 224, things mean. Good stuff
Thanks man ! It is a ripper !!
Great job!
Cool show y'all, I big fan of putting side shaft motors on mini quads .,an three wheelers
Thanks for watching !! Subscribe for more builds !!
You need to stretch that frame back about 8 inches. Will help with not floping on yer back. Sweet build though, snappy as heck!
We stretched our ghost build a little. It definitely helps !
Dude badass keep up the great work😊
Thanks for watching !
😂😂 Buck Potter UA-cam channel love 224
Nice 👍
I need to build one!! Do you guys have a parts list on any of your videos? I'm new to this and not sure what I would need besides frame and 212 motor lol
No, but that's not a bad idea. I go a little more in depth on the newest one we built. Last upload on the channel. Thanks for watching !
Get a rear thumb brake to catch those run away wheelies
Building and selling? Or just building for personal use?
Build to hurt ourselves, why you want one?
@@thehoperanchchannel4950 Yes I started building one here in the Bahamas a couple of years ago. But got tied up in politics. If I were to send you a new mini quad this spring how much would you charge me to swap the engine for the same 224cc you placed in yours?
"Build it to hurt yourself" is an understatement, that Wipeout after the jump was epic. Great video, great Build. Very entertaining and learned a few things
I'm looking for me one now but imma change hubs to racing gokart hubs and wheels and tires to ride on my track
fuck yeah
I have this exact same frame with a stock 196cc engine on it and it’s super sketchy.
Super sketchy is an understatement haha
i got the cvt set up got a 420 chain its like it doesnt fit the rear sprocket how did u get it to work?
We use a #40 or #41 chain.
Ok what about chain length how long was that chain I'm gonna order a 140 link chain that should be enough right ? 😂
@@jesseholland1851 we buy the 10' box from the hardware store and it will do 2 quads and have a little left over
Hi I'm building a 224, I'm just wondering if the parts I got for it wont blow it up, what I already have on it is a governor delete, oil censor delete, cast aluminum fly wheel rated for 10k rpm, billet rod, 18lb valve springs and a mikuni clone round slide. I ordered a .01 head gasket, 22lb valve springs, and a 265 hot cam. ill do the necessary clearancing, but I'm just wondering if I need anything else for my setup to run reliably.
Get the right jets, and I would suggest a fuel pump. It'll want more fuel now. Then send it !
@@thehoperanchchannel4950 I do have it jetted, and now that you mention it I should get a fuel pump, but everything else is good? I'm new to this and don't want it to blow up on me, thank you though
Just remember anything ungoverned has a possibility to blow up, just don't hold it wide open too long. And jet size will change with different parts and weather
Even if it does blow, you have a stack of good parts for the next one that you won't have to buy again.
@@thehoperanchchannel4950 can i get an electronic governor like the ghost has but limit it higher?
What kind of mini frame did you use
How did you mount the seat
New factory seat from Amazon. Just searched "mini quad seat" 19.99
Yessssirrrrrrrr
did you remove anything inside the engine?
@@johncarltenedor3158 like what
What size rims and wheels do you have and do you know the name of the blue quads frame
6" wheels and tires. Don't know the brand of any of them. The blue one was pretty modified, we cut the uprights down about 3" and flattened the top frame rails to fit the flat seat she wanted and stretched the swing arm 3"
That shit ripsssss
which carb is that?
On this one it was a knock off 22mm mikuni. With a 120 jet
OMG that thing is wild but it’s gonna kill someone
What plate amount did u use?
20 dollar amazon plate
You didn't need the pulse pump.... It's called... GRAVITY FED!
@@whoxMarkxJones I would recommend a pulse pump with what we do