Really fun platform! Comment if you got any questions. The UMP45 can also take the UMP9 magazines and vice versa. As a commenter has pointed out, ump magazines can actually take 30 rounds instead of 25 rounds.
Will you plan on making the video on the step by step process of making the fire rate realistic? I did see a comment about it but since I'm new to making changes like that, it would be nice to actually see it all
@@chickennugget1011 I did make a video for the step by step guide on modding it to get full travel. But youtube changed many of their guidelines recently, so I have taken it down it just to be safe. In short, I don’t think I can because UA-cam might give me a strike.
@@Airsoft_Chay me too but i was doing some shooting drills on burst and i got off 15 trigger pulls before the bolt locked so then i counted while painfully reloading one by one and its indeed 30 Think if u just mention it in the description of pinned comment should be okay folks will see it
Hi! JC from SEA, again. Been binge watching your videos, every single one is just well made and fun to watch! I have a thing for HK guns and this seems to be the next one on my list next to the HK416A5. I wanna ask, how does this differ from the 'DX' version? Which is the one currently available in the PH. There's also a V3 Version? And the V1 with bolt and cooldown issues? It's all very confusing, please help me. I just want to make sure I get the version that I want, thank you!
@@JC360XL Hey JC! Thanks man, that means a lot! The DX version is basically the “deluxe”, which comes with the rails for the hand guard out of the box. But funny enough, I’m pretty sure they all do at this point, so it doesn’t matter anymore more. It’s very hard to find a V1 UMP at this point, unless you find one used. You are right, the older V1s are plagued with cooldown due to the super heavy bolt they had. Iirc, the “V3” UMP is the UMP9, which doesn’t have any updates from the previous V2 UMP45. They are all the same on all aspects.
bro you've got a really sick collection!! all your gbbrs are maxxed out with full gear. really nice seriously. im proud of my aeg collection but seeing your guns makes realize i need to start my gbbr journey! to hell with my krytac's. what gbbr would you suggest for someone who's got some high end aeg's but it would be 1st gbbr. i dont want to have to upgrade a bunch of stuff, been there done that but also dont need a high end gun. i justwant some that will last and be a good platform as i get more familiar with gas rifles. if you get a minute let me know what you think. im an m4 lover but love my avalon mp5 . thanks my friend. i love seeing your killer gbbr's. cheers
Thanks man! your compliments means a lot! I'm glad I can persuade you to join the better side of airsoft, haha jk lol. For your first gbbr, I'd recommend any of the newer VFC's or TM's. You mentioned liking M4s, VFC's Gen 3 ARs are wonderful out of the box and so is the Tokyo Marui's MWS, both are great choices. Any VFC that is gen 2 or 3 will be great out of the box if you want any other platform like the MP5. I hope I helped! If you have any more questions, I'm always happy to help!
I’ll give you steps by steps, you will need to buy a real steel buffer for the way I did it. 1st: remove the original short stroke buffer. It is a flathead screw on the recoil rod. 2nd: Add material to the hole in the back plate where the real steel buffer will go in. It can be anything, it just needs to be a flat surface for the buffer to sit on. 3rd: Sand down the hammer until it is flush with the roller. Now you have a realistic fire rate!
@@jackychowYT put the speed loader right onto the feed lips of the magazine, then cover the front and back with your fingers and find the angle for the bbs to easily go in. There is a pin in the back to disassemble, you just need to pull it out.
I've had to use a ramrod style loader for my 2 mags. It broke my speedloader and even an Odin isn't strong enough to load them. I've left them fully loader for weeks lol and they're still incredibly hard to reload
@@IAMStormyNautilus unfortunately, I already sold the gun but I use the 500 round speed loader and I feed it in at the top with my fingers covering the back and front on the feed lips of the magazine. It worked pretty well, despite me never being able to reach full magazine capacity.
The V1 has a stiffer recoil spring and a zinc bolt. The stiffer spring and heavier bolt causes the v1 efficiency’s to be horrible. V2 has a lighter recoil spring and an aluminum bolt.
@@elijahindoraptor9249 I have also heard it from the HRC discord server so it looks like that will come after a lot of usage. Shouldn’t be a problem though, I haven’t heard anyone complain.
Just out of curiosity, do you have dimensions for the factory Muzzle Device? I’m wanting to 3d print an adapter but haven’t received mine yet. Hoping to get some information before mine arrives!
The pin holding your bolt release walked out. Test to see which spring fits into the little hole perfectly and put the bolt release on it to see if it has enough tension. Then just put the bolt release pin back in! Let me know if you need any more help, I dealt with the same problem haha.
Really fun platform! Comment if you got any questions.
The UMP45 can also take the UMP9 magazines and vice versa.
As a commenter has pointed out, ump magazines can actually take 30 rounds instead of 25 rounds.
Could you make a video about how to mod the new gen 3s for realistic rof??
@@davidahn460 i don’t think there is a newer gen 3? I already have a video up for doing the mod!
@@Airsoft_Chayoh I believe that airsoft extreme sells them. SKU is 2262044
@@Airsoft_ChayI believe airsoft extreme sells them. Elite Force H&K UMP 45 Elite GEN3 GBB by VFC
? I saw one of vfc’s gen 3 ump45s in AirsoftExtreme
I’m really thinking about picking one of these up
We've just had the same itch hahaha
@@USAirsoft You should!
Just bought one earlier today, cant wait for it to show up for my first gas blowback replica!
Great first choice!
Will you plan on making the video on the step by step process of making the fire rate realistic?
I did see a comment about it but since I'm new to making changes like that, it would be nice to actually see it all
@@chickennugget1011 I did make a video for the step by step guide on modding it to get full travel. But youtube changed many of their guidelines recently, so I have taken it down it just to be safe. In short, I don’t think I can because UA-cam might give me a strike.
Great review!
What is the best VFC replica in terms of recoil?
Thanks man! Any V3 AR that comes with a steel bolt has the most recoil in my opinion.
May be worth mentioning the UMP9 mags fit this as well and idk if its something of the newer later batches but the 45 mags now hold 30 rounds
Looks like i forgot a detail haha. Cool, I thought they always held the 20 rounds
@@Airsoft_Chay me too but i was doing some shooting drills on burst and i got off 15 trigger pulls before the bolt locked so then i counted while painfully reloading one by one and its indeed 30
Think if u just mention it in the description of pinned comment should be okay folks will see it
@@lofighost8811 great idea, i was thinking about adding information to the pinned comments but kept forgeting.
The 45 mags fits in the UMP9?
@@paulovitor9388 no, the UMP9 cant take UMP45 mags but the UMP45 can take UMP9 mags
Hi! JC from SEA, again.
Been binge watching your videos, every single one is just well made and fun to watch!
I have a thing for HK guns and this seems to be the next one on my list next to the HK416A5.
I wanna ask, how does this differ from the 'DX' version? Which is the one currently available in the PH. There's also a V3 Version? And the V1 with bolt and cooldown issues? It's all very confusing, please help me. I just want to make sure I get the version that I want, thank you!
@@JC360XL Hey JC!
Thanks man, that means a lot!
The DX version is basically the “deluxe”, which comes with the rails for the hand guard out of the box. But funny enough, I’m pretty sure they all do at this point, so it doesn’t matter anymore more. It’s very hard to find a V1 UMP at this point, unless you find one used. You are right, the older V1s are plagued with cooldown due to the super heavy bolt they had. Iirc, the “V3” UMP is the UMP9, which doesn’t have any updates from the previous V2 UMP45. They are all the same on all aspects.
@@Airsoft_Chay Thanks man, you've been great help on my airsoft thingamajigs! God bless!
I gotta ask: how durable is the charging handle. Also love your videos :)
It’s pretty durable, never broke on me when I was hard in it. If it does break real steel ones are a drop in!
bro you've got a really sick collection!! all your gbbrs are maxxed out with full gear. really nice seriously. im proud of my aeg collection but seeing your guns makes realize i need to start my gbbr journey! to hell with my krytac's. what gbbr would you suggest for someone who's got some high end aeg's but it would be 1st gbbr. i dont want to have to upgrade a bunch of stuff, been there done that but also dont need a high end gun. i justwant some that will last and be a good platform as i get more familiar with gas rifles. if you get a minute let me know what you think. im an m4 lover but love my avalon mp5 . thanks my friend. i love seeing your killer gbbr's. cheers
Thanks man! your compliments means a lot! I'm glad I can persuade you to join the better side of airsoft, haha jk lol. For your first gbbr, I'd recommend any of the newer VFC's or TM's. You mentioned liking M4s, VFC's Gen 3 ARs are wonderful out of the box and so is the Tokyo Marui's MWS, both are great choices. Any VFC that is gen 2 or 3 will be great out of the box if you want any other platform like the MP5. I hope I helped! If you have any more questions, I'm always happy to help!
you mentioned „another video“ for increasing the recoil massively! Any hint how to do that?
I’ll give you steps by steps, you will need to buy a real steel buffer for the way I did it.
1st: remove the original short stroke buffer. It is a flathead screw on the recoil rod.
2nd: Add material to the hole in the back plate where the real steel buffer will go in. It can be anything, it just needs to be a flat surface for the buffer to sit on.
3rd: Sand down the hammer until it is flush with the roller.
Now you have a realistic fire rate!
Is there any difference between Gen 1 and Gen 2?
Yes, gen 1 are horrible. Gen 2 are great!
How do you like put the bbs in? Its so tough help?
Do you have a speed loader? Typically these magazines are pretty tight but I just guide the speed loader with my hand and bbs goes in pretty easily.
Yeah but I don't know how to put it in and btw how do you disassemble it?
@@jackychowYT put the speed loader right onto the feed lips of the magazine, then cover the front and back with your fingers and find the angle for the bbs to easily go in. There is a pin in the back to disassemble, you just need to pull it out.
I've had to use a ramrod style loader for my 2 mags. It broke my speedloader and even an Odin isn't strong enough to load them. I've left them fully loader for weeks lol and they're still incredibly hard to reload
@@IAMStormyNautilus unfortunately, I already sold the gun but I use the 500 round speed loader and I feed it in at the top with my fingers covering the back and front on the feed lips of the magazine. It worked pretty well, despite me never being able to reach full magazine capacity.
I really like the idea of the ump
But the Scorpion Evo 3 is a very similar animal
Someone make a gbb scorpion evo please!
Do you know what'sthe different between v1&v2?
The V1 has a stiffer recoil spring and a zinc bolt. The stiffer spring and heavier bolt causes the v1 efficiency’s to be horrible. V2 has a lighter recoil spring and an aluminum bolt.
Ive heard the bolt catch chews up the polymer receiver, is that true for the V2/V3 guns?
Just checked mine, I don’t see any marks or signs of the bolt catch wearing out the polymer receiver.
@@Airsoft_Chay Huh, heard that, but it was probably from V1 owners
@@elijahindoraptor9249 maybe over a long period of usage, I haven’t had mine for long. However I did plinked with it a lot.
@@Airsoft_Chay Ok, but I have only heard info on Reddits from 3-ish years ago
@@elijahindoraptor9249 I have also heard it from the HRC discord server so it looks like that will come after a lot of usage. Shouldn’t be a problem though, I haven’t heard anyone complain.
❤️👍👍👍👍😉謝謝你的分享。
No problem!
Just out of curiosity, do you have dimensions for the factory Muzzle Device? I’m wanting to 3d print an adapter but haven’t received mine yet. Hoping to get some information before mine arrives!
Unfortunately, I don’t have the replica anymore so I cannot measure it. Sorry!
@@Airsoft_Chay not a problem! Mind if I ask why? Did you end up selling it or did it have a parts breakage or otherwise?
Thanks for all your help’
@@guyandagun I sold it because I usually sell off replicas after a while to fund new ones. Nothing was broken, it was actually one of my favorites!
@@Airsoft_Chay fantastic. I know how that goes. Out with the old and in with the new! Thanks again for the help!
@@guyandagun glad I can help!
What scope is that at 0:54?
Aimpoint Comp M2
My bolt catch fell out and i dont jnow how to put it back together theres 2 springs one tiny one and long
The pin holding your bolt release walked out. Test to see which spring fits into the little hole perfectly and put the bolt release on it to see if it has enough tension. Then just put the bolt release pin back in! Let me know if you need any more help, I dealt with the same problem haha.
@@Airsoft_Chay problem is that there was an extra tiny spring fell out and I don't know what to do with it
@@playstation4hkaccount47 i’m not quite sure where the tiny spring goes, I never saw it in the bolt release. But does everything works?
@@Airsoft_Chay yep after I screw the big one back to where the bolt lock was
@@playstation4hkaccount47 as long as everything is working perfectly then I’ll say it’s fine lol.