*This is my second WEN tool and they are both great **MyBest.Tools** I needed to do some trim work around the house and needed a scroll saw for the intricate work. No complaints so far.*
I just bought my first "scroll saw" its actually the Dremel Moto saw. I make name signs just like yours but have always used vinyl and hand paint a design below. This video and your work is AWESOME!! Was reading through all of the comments and I just need to say its cool you respond to everyone even if its the same question multiple times. You should make more videos, great job!!!
Really appreciate it 🙏 I try my best to help others out If you wanna see all my projects look up nvwoodco on instagram, and dm me if you have any questions 😁
You make it look so easy! I really want to purchase a scroll saw to make these signs for my girls. Currently have a cricut and just want to do different things
Thank you! The circle is 3/4 birch plywood from home depot And for the paint I just used rustoleum spray paint followed with a flat clear coat over the entire piece. 👌
How do you keep the plywood from chipping? Maybe i need finer blades? My blades have a pin on each end is it better to have a saw without pinned blades? Great work!! Definitely subscribed
Definitely get some finer tooth blades it should help with your issue. I use pinless blades since pinned can't be made as thin. I also always run my speed full blast! Feel free to message me on instagram if you're still having trouble and thanks alot, really appreciated it!
No problem! I did that same technique for a while too, You get a decent router bit and a drill bit also with the kit, its worth the money and the convenience
Is that a spiral blade you are using? Ive had a hard time finding any locally. I really want to work on more intricate projects like this! If you could share the details on the blade that would be awesome. Thanks! And great work btw! 👍
Thanks! I use Olsen PGT blades and I order them off Amazon. The double skip reverse tooth blades are my favorite so far. I dont use spirals often. They leave a rough cut and its hard to cut a straight line.
hello! what is the tool guide you use to measure the circle before you use the milescraft circle guide. if you are using a jig saw for the letter what blade do you recommend? Thanks
Hey, that tool guide was just a big compass. Basically a dowel rod with a nail through it, and a pencil on the other end. It would be tough with a jigsaw but doable, I'd recommend the diablo reverse tooth blades though. Any blade with alot of fine teeth so it will cut clean as possible.
@@nvwoodco I haven’t been going full speed yet I’ve tried the one that came with it I have the Ryobi and I bought a variety pack by Ryobi one was 7 TPI and the other was 18.5
@@nvwoodco even if it’s about an inch thick?? My father in law brought me some scraps from his job to practice on I believe it’s pine wood I’m still trying to figure the blades out too I thought the more teeth the better the cut just slower but I also read if it’s thicker your teeth need to be wider apart
1 inch thick will bounce more then anything else. Try some 1/2 birch plywood or 1/2 mdf. Also go to my instagram page. Nvwoodco and see all that can be made. Feel free to message me on there and I'll help you out.
*This is my second WEN tool and they are both great **MyBest.Tools** I needed to do some trim work around the house and needed a scroll saw for the intricate work. No complaints so far.*
Happy to hear that!
I just bought my first "scroll saw" its actually the Dremel Moto saw. I make name signs just like yours but have always used vinyl and hand paint a design below. This video and your work is AWESOME!! Was reading through all of the comments and I just need to say its cool you respond to everyone even if its the same question multiple times. You should make more videos, great job!!!
Really appreciate it 🙏
I try my best to help others out
If you wanna see all my projects look up nvwoodco on instagram, and dm me if you have any questions 😁
so pretty! I love the colors!
Thanks! 🤙
You make it look so easy! I really want to purchase a scroll saw to make these signs for my girls. Currently have a cricut and just want to do different things
Thats a great compliment! Just lots of practice, anyone can do it if you have the drive
You can see everything I've made and currently making on my instagram too btw. 😁
Thanks for the video! Learned a lot!
Thank you!
Great job!!
Thanks!
Good job
I am new woodwork scroll saw
Thanks
just amazing work. just a few questions. how do you paint the letters? What wood did you use for the circle? This has been very helpful:)
Thank you!
The circle is 3/4 birch plywood from home depot
And for the paint I just used rustoleum spray paint followed with a flat clear coat over the entire piece. 👌
That's awesome sign man. Question. What kind of glue were you using to put on the letters.
Thanks my man 🤙
Loctite super glue 👌
🤩🤩🤩🤩🤩Very nice 🤩🤩🤩🤩🤩
Really appreciate that!
Beautiful. What font do you use for Noel?
Thank you! I believe it's called ravelin, it's been a while
Thanks for the video. What spray did you put on at the end - what does it achieve? :)
Just a final clear coat, I use a matte finish so its all the same sheen. 👍
How do you keep the plywood from chipping? Maybe i need finer blades? My blades have a pin on each end is it better to have a saw without pinned blades? Great work!! Definitely subscribed
Definitely get some finer tooth blades it should help with your issue.
I use pinless blades since pinned can't be made as thin.
I also always run my speed full blast!
Feel free to message me on instagram if you're still having trouble and thanks alot, really appreciated it!
Hi there! I am trying to start selling these. I love your video! This is exactly what I need to do. What items do you use to cut your circles out?
I use a router but you can use a jigsaw or bandsaw as well
Find me on instagram NVwoodCo
Feel me to message me on there im happy to help
@@nvwoodco I will be messaging you shortly thanks so much!!
This was helpful! What is the guide called that you used with your jigsaw for the circle?
👍 milescraft circle jig
You can find it at lowes
NVwood Co thank you! We were going to make a homemade protractor out of a 1x3 and a router but this looks so much easier!
No problem! I did that same technique for a while too,
You get a decent router bit and a drill bit also with the kit, its worth the money and the convenience
Is that a spiral blade you are using? Ive had a hard time finding any locally. I really want to work on more intricate projects like this! If you could share the details on the blade that would be awesome. Thanks! And great work btw! 👍
Thanks!
I use Olsen PGT blades and I order them off Amazon.
The double skip reverse tooth blades are my favorite so far.
I dont use spirals often. They leave a rough cut and its hard to cut a straight line.
@@nvwoodco Thank you for replying. Got mine ordered and will be here tomorrow!
Good deal!
nice work, how was the stencil attached to the wood, as it peeled off so easily?
Thanks my man, when im not being lazy ill stick some clear contact paper on the wood first before the stencil.
So nice !! what material did you use for the small letters ?
Thanks,
I used 1/2 inch MDF for 'Noel'
1/4 inch birch plywood for the letters and 3/4 birch for the circle
Why not use MDF or ply for all of it? Why use two different kinds of timber products?
hello! what is the tool guide you use to measure the circle before you use the milescraft circle guide. if you are using a jig saw for the letter what blade do you recommend? Thanks
Hey, that tool guide was just a big compass. Basically a dowel rod with a nail through it, and a pencil on the other end.
It would be tough with a jigsaw but doable, I'd recommend the diablo reverse tooth blades though. Any blade with alot of fine teeth so it will cut clean as possible.
😎 Which software you use for print your wood design ?
Inkscape
What type of wood do you use for the letters? Love your work!
Thanks!
Birch plywood and mdf is my go to's
@@nvwoodco love how you explain the cuts on the video, what is the thickness of the wood? What does mdf mean? :)
I use 1/2 or 3/4 inch thick alot.
Mdf is medium density fiberboard.
I either use that or birch plywood for my materials
@@nvwoodco thank you so much,
You're welcome
Hit me up on instagram for any questions
Nvwoodco
What type of glue do you use for the letters? Have you ever had an issue with them coming off? Thanks for the video!
Thanks alot!
I use gorilla glue super glue gel
I've made so many signs by now and I've never had an issue!
What brand of paint do you use to paint your letters?
I have the best results with rustoleum painter's touch, followed by rustoleum flat clear coat 👌
nice video..what name the tool connect to router for make round cut?
Milescraft circle jig! 🤙
What kind of glue are you using ?
Loctite super glue 👌
What type of paint do you use on the lettering.
I have good look with rustoleum painter's touch spray paint.
@@nvwoodco what about something that needed more detail
@@mr.smalldoesmath1237 light dusty coats will get into most grooves, also ive used a qtip for those small nooks and crannies before. But same paint...
I just bought a scroll saw how do I keep my wood from bouncing so much I feel like I have to hold it soooo tight am I using the wrong blade??
What blades are you using? I also cut with my blade speed all the way up.
@@nvwoodco I haven’t been going full speed yet I’ve tried the one that came with it I have the Ryobi and I bought a variety pack by Ryobi one was 7 TPI and the other was 18.5
The higher the tpi usually the better, what material are you cutting?
@@nvwoodco even if it’s about an inch thick?? My father in law brought me some scraps from his job to practice on I believe it’s pine wood I’m still trying to figure the blades out too I thought the more teeth the better the cut just slower but I also read if it’s thicker your teeth need to be wider apart
1 inch thick will bounce more then anything else. Try some 1/2 birch plywood or 1/2 mdf.
Also go to my instagram page. Nvwoodco and see all that can be made. Feel free to message me on there and I'll help you out.
how do you print out the big letters
Smaller ones, like this, I use a desktop printer and a program called Paint.NET
what the number your blade u use ?
I use Olsen reverse cut blades
This is not a class you are just watching someone make a sign
Cool Mrs G.... noone ever stated it was a class
Awkward. Words would be helpful
Its not a tutorial video, just content, but as you can see in the comments, I still do answer questions and give tips 😉
@@nvwoodco your comments have been the most useful thing I've found on youtube In months. thank you!
Awesome to hear!
I try to help out with any and everything question 👍😎
Hit me up on instagram if you need any other tips, glad to help out