Although I have maintained my left switch already the same way like you I want to thank you for your usefull and interesting K75-videos! I learned a lot of them. :)
Concept Symetry Guitars will do , thank you , just had mine pass it's M O T , took it for a spin and my speedo failed as if the throttle and wheels didn't correspond to each other , I tapped the speedo and it come back to life , although I must say I'd cleaned the sensor at the rear wheel , so I'm guessing the ( intermittent fault might be at the speedo end ) , Well see just have to fiddle about , Thanks for your advice appropriate it .
@@carlarthur4442 Most likely the plastic connectors in the back of the speedo have worked loose. I put a sprung plate in mine. See this video at 4:48. ua-cam.com/video/YDjyU6ndNMQ/v-deo.html
Although I have maintained my left switch already the same way like you I want to thank you for your usefull and interesting K75-videos! I learned a lot of them. :)
Thanks very much. It is good to know they are useful.
Really, really helpfull. Thanks for sharing ☝️☝️
I have the constant on headlight with no on and off switch would like to add an on and off switch if possible. Any thoughts on that?
I didn't know they did them on this bike. The easiest way would to be to buy a secondhand standard switch assembly.
Did it cure the problem?
Yes. But you can only do it so many times. It is better to buy a newer switch or fit a relay to prevent the burn out.
This happened on my bike , I just sent for another switch from Motorworks, but kept the faulty one ☝️, Thanks
Also make sure the connections in the loom under the tank are clean and tight. I wasted money buying a new switch when the old was fine.
Concept Symetry Guitars will do , thank you , just had mine pass it's M O T , took it for a spin and my speedo failed as if the throttle and wheels didn't correspond to each other , I tapped the speedo and it come back to life , although I must say I'd cleaned the sensor at the rear wheel , so I'm guessing the ( intermittent fault might be at the speedo end ) , Well see just have to fiddle about , Thanks for your advice appropriate it .
@@carlarthur4442 Most likely the plastic connectors in the back of the speedo have worked loose. I put a sprung plate in mine. See this video at 4:48. ua-cam.com/video/YDjyU6ndNMQ/v-deo.html