NP300 Ironman Bullbar + PPD Intercooler DIY Install
Вставка
- Опубліковано 7 жов 2024
- Beefing up Sams 2020 NP300 Navara with an Ironman Steel Bullbar colour matched in powder coat and a PPD front mount intercooler. The intercooler took the longest to install as the instructions were poor. The bullbar was very straight forward apart from some difficulty due to the wrong bolts being supplied.
If you are having difficulty installing a PPD intercooler here are some instructions from Plazmaman.
plazmaman.com/...
The Plazmaman install is very similar and the instructions are significantly better. I wish I had found these instructions before our install. This is why you will see we did things a little differently on our install.
So far the only issues we have had is Intercooler hoses slipping of due to weak hose clamps, I would recommend using the stronger T-bolt style hose clamps if possible.
Thanks for watching, leave any questions in the comments below.
How you found the ppd intercooler mate? Especially intake temp wise.
Just orded one for my triton and noticed was very few fins inside the actully core to disperse heat so curious to know how yours performed
That and mine came with pipes all messed up so debating whether to tell them to take the entire kit back and refund me if it actually doesn't work very good
Cheers 7:09 7:33
Quite a few pipes were rubbing in various places. As for the temp drop I can’t say as I didn’t have gauges
Can you buy the bullbar coloured like that from Ironman?
I believe you can get it optioned in this colour
Nice rig, what size tyres you running.
thanks mate, they're 33s in this video I think they're 285/75/16 but are now on 305/70/16
Did you guys have to drill any holes for the chassis brackets? Cheers
From memory no we didn’t I think they all went into factory holes
hey mate, i know it’s an old video but how did you mount the grille support of the intercooler is in the way? cheers
From memory we used zip ties to secure it in place