Lowered Yukon 26 wheels 5/7 drop
Вставка
- Опубліковано 20 жов 2024
- In this video my Yukon has a 5/7 drop sitting on 26” Ltz Replicas. With 295/30r26 tires in front and 305/30r26 tires on the rear. Using 3” drop djm upper and lower control arms with 2” drop mcgaughys spindles for the front, and 6” Norcall Ss drop springs in the rear without rubber isolators and cut rear bump stop brackets for clearance. Pacesetter long tube headers with a blackbear tune. For the system dual xs power battery’s and dual alternators dc power 370 amp and Mechman 250 amp with all 0 gauge wiring. The subwoofers are 4 15” Kicker cvx ported with 4cubic ft each at 30hz using a sundown audio 4K mono amp. The radio is a pioneer Deh-80prs and door speakers are skar audio as well as the 4ch 1000k.
Channel shirts #ad amzn.to/47aNiVR
Premium T-shirts #ad amzn.to/43SFpS1
Pullover Hoodies #ad amzn.to/3OhbqO8
Front drop parts
Djm front 3” lowering control arms left and right sold separately
Djm Driver side lower control arm 3”
djmsuspension....
Djm Passenger side lower control arm 3”
djmsuspension....
Djm upper control arms for camber correction
djmsuspension....
Michigan metal works bump steer kit ******careful with this company I bought some upper control arms from them and they were the wrong length so I sent them for exchange or repair and they never sent them back to me. They cost me over $700 and I have nothing back. Try calling them, I call and they never answer or my emails******* or consider buying from Ekstensive Metal works a more reliable option I will list below as well
michiganmetalwo...
Ekstensive Metal works Front bump steer kit
store.ekstensi...
Djm front shocks each sold separately
djmsuspension....
Mcgaughys 2” drop spindles need 17” wheels or larger #ad amzn.to/3PF1kFD
Rear drop
Norcal SS custom 6”rear drop springs, you may have to call him or email him to sell you the springs separate since I don’t see them listed alone anymore on his site, or buy his rear kit which has all the parts needed together. These are the best rear lowering springs for our trucks with the most drop available, they ride low and smooth not bumpy at all
store.tbssowne...
Djm rear shocks each sold separately
djmsuspension....
Rear Sway bar end links so your springs don’t pop out of place
2000-2006 Avalanche, Tahoe and Suburban Rear Lowering Hardware Kit - DJM Suspension
Cut rear bump stop bracket, free travel mod
• Free Travel Mod (Ultim...
Rear shock extenders #ad amzn.to/3PtJhms
Spohn Performance adjustable panhard bar
To center your axle
Panhard bar Red color #ad amzn.to/3cx72uV
Panhard bar black color #ad amzn.to/3zmyuVd
Spohn Performance adjustable rear lower control arms to center your wheels in the wheel well
www.spohn.net/...
Disclaimer: The information provided in this UA-cam channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised.
Man, that thing looks clean I have a '03 that I just put on. 26s I had to take out that reservoir too. The lump in the fender wall was rubbing on mine. Super bad not no more though. Looks clean. My boy Dad lowering kit made it look so good
Nice, yeah they look good lowered and Thanks!
Clean ass yukon bro.. nice to see other people put work in there suv!
Thanks 💯
Dope video bro. Keep the Yukon videos coming love hearing the system and showcasing it. I have a 1999 chevy tahoe and am in the process of getting my system aswell. Seeing videos like this is dope bro keep them coming💯
Thanks! Will do!💯💯💯
That looks nice I really like the combo for the lowering kit u used.
Thanks!!🥶 Appreciate it
Dope af never seen the led in the vent caps before
Thanks!⚡️ I’ve never seen them on the street but I have seen a few people do videos on some but the videos are not that good in my opinion lol I will try to make one soon on how to wire them up and an upgrade to them🥶
Hell yeah thanks bro
@@josephscisson5253 no Problem⚡️
Man i love this build ,hate he wrecked it
🫶🏼🥲
Dammmm!!! looks awesome ...from phx az
Thanks! Appreciate it💯
Its so clean! 👍
Thanks
Nice yukon.
I have an 03 yukon denali.
I'm running airbags in the front and back.
Nice I want to add some on mines one day too, and thanks
Man this looks nice. I wanna drop my tahoe this low but i tow with mine. Probably going to go 2/4 on these 26s my dad got laying around. Have been looking into doing the air shocks with helper bags in rear to be able to drop it when parked
Thanks!💯 yeah you should add helper bags if you drop it for when u tow. If you drop it it 5” in the rear I would recommend the Djm Blue springs they are very stiff so they should be good for towing
@@MiGo713 definitely going to do them at least. And maybe add the air shocks later so I can raise and drop the rear
@@djmurria yeah I’m sure they will all help out with your towing⚡️ Good luck on your build💯
Clean Yukon 🔥
Can you consider doing a tutorial on the voice module for the alarm. I got a viper alarm.
Thanks, yeah sure i will do it. Just give me a bit of time, make sure your suscribed so you get notified when I drop the video👍🏼
@@MiGo713 thanks bro really appreciate it.
@@andresgarcia1806 no problem
Looks good 👍
Thanks!🥶
Very clean Tahoe brother!! I have a 2000 Suburban that I'm working on and I want to know how you did the lights behind the Escalade vents (hopefully you have a video on it). I have the Escalade vents already just waiting to paint and install.
Oh Thanks💯. I have my Yukon at a shop right now and I don’t have a video yet on the lights, but I will try to get one done as soon as I can 👍🏼 I bet your Suburban will look good with those vents⚡️
@@MiGo713 I would appreciate that brother!! I'm just trying to get mine to look somewhere near as good as yours brother!! Absolutely beautiful truck!
@@jameswebb3932 no problem and thanks🥶 I want to make her nicer one day lol
Did those doors already come like that? Usually they have side molding trim in black or chrome
No, I just removed all the mouldings👍🏼
That's clean
Thanks!!⚡️
How did you keep the tires from hitting the upper trailing arm bracket on the frame
In the front or rear?
@@MiGo713 in the rear. Adjustable trailing arms?
@@jasonprater9221 Here I explain all the parts I used 👍🏼 ua-cam.com/video/F3OVzQO1oxo/v-deo.html
🔥🔥🔥🔥
💯💯💯
Love your truck ...I have a 2004 GMC Denali I did a 4/6 drop 7 years ago I still have the truck to this day... My question to you is the bushings on my upper control arms are gone, I need to replace them but it's hard for me to find parts that fit a Denali what would you recommend for replacing upper control arms!!!!!!
Thank you!! 💯💯💯Denalis are nice, I bet it looks great with the 4/6. I’ve used DJM control arms and they’re great, but if you need something more custom you could try out Michigan Metal Works I have those currently on my Yukon even though I crashed it. They are more expensive but more customizable. My Yukon is a 2wd not sure if yours is 4wd?
Thanks I'll look them up .........
@@Mack-f6l no problem 👍🏼
Because all the ones I'm finding on Amazon or eBay say they're from 62 to 94 trying to find one that will fit the '03 Yukon
I think now there’s a company that makes them I don’t remember the name
Clean looking truck where did you get your hood?
Thanks! It was custom made
Clean Yukon G 💯🔥 My 4 15s Make My Tahoe Sit Just Right Too lol I Just Want To Lower My Front A Bit More Might Drop The Keys A Bit More
If You Dont Mind, On A Flat Ground... Whats Your Measurements From Ground To Your Fender On Front & Rear? (Center Of Wheel)
Thanks💯yeah I actually do have my keys cranked down a bit so my front is a bit lower than the rear, so that will work just remember it changes your alignment you will get more -camber
@@SleepyBoiii yeah I can get the measurements for you later I’ll post them for you⚡️
@@MiGo713 yeah bro cuz i got the belltech drop shocks & spindles , the alignment said i do have some camber but its a good camber, not bad at all. Its just half inch i want to drop, But i appreciate it bro 💯 keep up the good work
@@SleepyBoiii yeah I feel you, and thanks👍🏼 the rear of my Yukon has 305/30r26 tires and from center to the fender measures 16” and fender to floor 32”. On the front I have 295/30r26 tires and from the center to the fender measures 15.5” and from the fender to the floor is 31.5” hope that helps out⚡️
Looks clean man, how does the cold air intake perform though?
Thanks! The air intake performs good just like normal, I just moved the stock plug to the middle no cutting or extensions. And now I have lots of room in my engine bay to add other things or clearance in case I decide to do wheel tubs later💯
I know it’s years later but was the Denali bumper swap straight forward and easy? When I look online all I find is bumper covers and I don’t want to order the wrong shit man😂😂
It’s a bolt on but you will also need the bumper part behind and for the cover to hold on, and will need the denali grill, parking lights. It might be a good idea to get it together at a salvage yard or market place
U gain that last inch by removing the spring isolator on the rear?
With weight of my audio system and I also removed my spring isolators👍🏼
Wassup bro! I just dropped my tahoe 4/6 drop, but dam my truck bouces alot it's a rough ride, how does your truck ride with the drop ?
Hey What’s up! That’s a nice drop💯 my truck drives smooth it’s probably your springs if thi got cut they will be bouncy, I would recommend the Tony Norcall ss springs they will get you the lowest and smoothest ride 00-06 Yukon 5/7 drop parts
ua-cam.com/video/F3OVzQO1oxo/v-deo.html you can check out the parts I used here👍🏼
Where did you get your taillights bro I have a Tahoe with the same barn doors and I can’t find twilights for it
Cool! And here amzn.to/3iK19y2 I also have the video on my channel showing more led taillights for the barn doors💯
I have a question in the part of 3:45 the top of your tail light doesn’t blink or turn on?
Right now I have them connected as my parking lights and also as my brake lights. I could wire them as turn signal but I didn’t really care for that. I will be changing them up soon when I get a chance I will make a video on it⚡️
@@MiGo713 if you can bro make a video how to wire them probably plz imma order them and see how they look Ik imma fuck up wiring them 😂
@@MiGo713 or if u can just send me direct message showing me how bro
@@dereckhernandez5945 For sure lol sometimes the wiring gets confusing for a lot of but it’s not too bad. I’ve been trying to make the video but my schedule’s been busy mostly cause of work🥵 but I will get it done😎⚡️
@@dereckhernandez5945 I will get the video done pretty soon, since it will be easier to explain like that💯
im tryna run the same wheel/tire set up on my 00 sierra w a ihc 4/6 you think they’ll fit?
Nice, yeah they should it’s the same front end
How did you add the lights in the rear Escalade pillars?? 🤯🤯
I’m about to make a video on it soon💯 I’m Just waiting to get my Yukon back from the shop it’s getting some work done from the accident I had
Did the front tires run in the back of the wheel well
Yes they use to rub before I trimmed and adjusted it, because I use to have 28” rims on it
Right on looks really good.
@@jonjackson374 Thanks!⚡️
Where can I find a badge like that
I bought a separate Lsx badge and took the Hoe letters of a factory Tahoe badge to join them together in my truck👍🏼
What size tires u running. Looks good
Thanks! They are 295/30r26 in front and 305/30r26 in the rear
Sumbotch🔥🔥🔥🔥
Hey bro where'd you get the billet shifter from?
I purchased it a long time ago on eBay or Amazon, it was a universal shifter so I had to shave it and make it work
Do you have a video on how you dropped it?
I don’t have a video when I dropped since it was a while back and I just started being more active on my channel, I can make new videos on going over specific things I have now or anything new I’m adding
@@MiGo713 yeah that would be cool. Thank you.
@@superior3384 cool no problem
That's the hardest Tahoe in the country
Wow Thanks, I still want to make her better later on
I have the same setup, but mine is a O2 Tahoe with a HD front end on some 24-inch infamous
@@andraedwards417 nice, Tahoe’s look good fixed up
So are you in Houston
@@andraedwards417 yeah in Houston
Hey bro please tell me how you did them pillar break lights .
Sure here is the link on my video how I did it💯 ua-cam.com/video/Vb8NlR8kxFE/v-deo.html
Need help changing my steering on my Tahoe can you help
Sure I have a video here on what I used to change it ua-cam.com/video/NeBsmOtcRUo/v-deo.html 👍🏼
Please. Where did you get that column shifter knob. And how did you do the steering wheel. and if you have other upgrades please let us know. Looks nice
Thanks, I got it a while back from billet I believe if I can find the link I’ll post it for you. And yeah I can post more upgrades when I do more
@@MiGo713 yes please
@@superior3384 Ok cool
Your truck is 🔥🔥 where can I get the hood
Thanks!! It was custom made with a cowl and Hd welded together
I’m interested in the custom pillars and want the same setup as u have
I can make and sell the Led Pillar kit now you can send a message on my Instagram @migo713
@@MiGo713 I don’t see ur instagram
@@michaelmcwhirt4690 yeah it’s there MIGO713
Where did you find the shifter
It was long time ago online but it I had to modify it, when I find another one I’ll make a video on it💯
@@MiGo713 thanks
@@markanthony5748 No problem!💯
Why do u have two alternators and what is the purpose of having 2 just curious to know thanks
I have 2 alternators to handle all of my aftermarket equipment like the amplifiers and subwoofers, that way I have no issues when I have everything on. The stock alternator is about 100-130 amps which is for all the factory equipment, just my subwoofer amp pulls at least 400 amps at full power⚡️⚡️⚡️ lol So this helps everything to work properly
@@MiGo713 alright that's cool I did not know you could do that is there anything hard about connecting the second alternator is there a special bracket or extra connections and wiring that has to be done in order to have 2 alternators?
@@georgegomez5654 no Problem, a lot of people don’t know as well 👍🏼. And they do sell the brackets with wiring with the 2nd alternator as a set available. I got mines from Dc Power as a kit💯 www.dcpowerinc.com/pages/product-result
I have a 2002 gmc yukon denali xL do you think putting a rebuilt transmission in my denali that has 219,000 miles is a good idea just asking
@@georgegomez5654 If your transmission is giving you problems yes I Would recommend getting your transmission rebuilt especially if your thinking of keeping the truck longer, I have the transmission on my Yukon and Silverado rebuilt💯👍🏼 The 4l60 transmission that came with these trucks are common to go out as early as 130k to 200k so people usually get them rebuilt. It all depends on how you treat it also taking care of them will last longer
What wheels are those
They are 2019 Ltz Replicas 26x10
Why don’t you list links of parts that you used for the drop !
I will be making a new video next time I get a chance going over the parts and linking them sorry for now lol
What amps you running
They are sundown audio 💯
Will this work on a 04 yukon xl?
Which part? Most likely yes there may be a few differences
Damn she look nice ad clean.. ad was it hard to do the steering wheel
Thanks, it wasn’t hard pretty simple to swap steering wheels. You do loose the airbag when you swap it and need to use a 2ohm resistor to remove the airbag light in the dash unless you don’t care.
badd ass wheels
@@marksantana505 thanks
Aye my boi where you get the hood 🔥?
Some guy had it for sale and I bought it from him awhile back
What's the color code on it?
Wa382e Pewter Metallic
What year?
2000
@@MiGo713 is it a sle or slt? Or denali
@@Yu_truck a slt I just put the Denali front Grill and Bumper
@@MiGo713 I got a question. I have a 2002 yukon sle, so can i install a denali bumper?
@@Yu_truck Yes you can💯
Too clean js
Bad Ass
Thanks!!