My Tahoe’s Transformation!🤯Simple DIY Upgrades🔥🔥🔥
Вставка
- Опубліковано 2 жов 2024
- Parts I used on my truck in this video🥶 I had them color matched and like the way it came out!
Channel shirts #ad amzn.to/47aNiVR
Premium T-shirts #ad amzn.to/43SFpS1
Pullover Hoodies #ad amzn.to/3OhbqO8
Mesh Grille #ad amzn.to/3pFjOyr
#ad amzn.to/3rUoBNn
SS bumper cover #ad amzn.to/422pBNj
Bottom lip I cut to fit on the SS bumper #ad amzn.to/3pE7RZS
Eraser kit for removing old adhesive tapes #ad amzn.to/43bVj9S
Spyder headlights #ad amzn.to/3D1aQPi
Clear parking lights amber reflector #ad amzn.to/3PJsQoJ
Small tiny ratchet #ad amzn.to/3NDdBv1
Milwaukee cutting tool #ad amzn.to/3JKb1lY
Milwaukee 18v battery #ad amzn.to/3K7w7Lh
Goo gone #ad amzn.to/3O0Pjwk
Rust reformer #ad amzn.to/43kFiic
Flat black spray paint #ad amzn.to/3NCvbzq
1” self Tapping screws #ad amzn.to/3NHqN24
Updated 3157 purple led drl #ad amzn.to/3r7SxoM
Disclaimer: The information provided in this UA-cam channel is intended for educational and entertainment purposes only. The techniques, modifications, and suggestions demonstrated are based on personal experiences and should be performed by individuals with appropriate skills and knowledge. It is essential to prioritize safety, follow manufacturer guidelines, and comply with local laws when modifying or operating any vehicle. The creator of this channel shall not be held liable for any accidents, injuries, or damages resulting from the use or misuse of the content provided. Viewer discretion and responsibility are advised. - Авто та транспорт
Check out My shirts if you would like to support the channel!💯 #ad amzn.to/47aNiVR
You pay so much attention to small details and thats what I like. Keep it up!
Thanks! For sure💯
Another great video, always being so detailed on things… and your wiring skills phenomenal
Appreciate it!!💯 I actually have to move my grill led power source wires from my side marker to the parking light wire in the middle lol I got exited and connected too quickly😂 but it’s simple to move over👍🏼
You should put some 8th inch thick rubber washers under the screws on the roof so you have no leaks
Yeah that may work, but I’ve always done them like this without any leaks so it’s good for now👍🏽
Ooowwwee 💪🏿💪🏿💪🏿im loving it
Appreciate it!!💯💯💪🏽💪🏽
@MiGo713 I been ready to do that just need extra help. My bowtie would be fire in the background of that grill too
@@trillville482 Yeah I feel you bro, and would look fire!👌🏼
That's dope bro
@@robertdavis7484 Thanks!!💯
Grill lookin clean 1 of 1 for sure
Appreciate it!
Really really great work, major updates and the front end amazing ‼️👀🏆
Thank you!😁 Yes it helped out so much👌🏼
It looks so good bro 😎
Appreciate it bro!💯
Clean !
Appreciate you!!
Nice video good ideas i have a 02 silverado 1500 truck i think i wanna do that SS bumper cover it look nice on your truck
Oh nice, and yeah will make it look nicer for sure💯 and Appreciate it!
Excellent clip! Filming is remarkably executed! Outstanding job!!
I’m glad you enjoyed it!! Thanks!
nice work, nice video. greetings from another Tahoe driver from germany 🙂
Germany 🇩🇪 on nice! And Thanks!!💯
I waited the whole video to hear you say foo. Disappointed but the Tahoe is🔥
Thanks!!
@@MiGo713 One thing I saw someone else do with the roof bolts was wrap them with Teflon tape to ensure no leaks. Have you had any problems without it?
@jankybobax8540 I’ve always done it this way and it hasn’t leaked, on my Yukon the same way but the teflon is a good idea if you want extra piece of mind👍🏽
did painting behind the grill cause any problems ?
No it’s just like normal, I do it to all of my trucks when they need it
😮 looks really good🔥🔥🔥 Can’t wait to see it dropped. The 2014 Cadillac 3rd brake lights look really nice on these, check them out
Appreciate it! 😁And yes she need drop soon or something lol I like those third brake lights but I believe it will not fit my Barndoors so I’ll have to figure it later on🤔
hi like your tahoe mod. but the SS bumper cover link is not working. can you update?
Thanks! I just updated it it may be out now but it’s made by street scene
I just bought a Yukon.. ain’t even drive it yet but I’m already loving the potential. This Handel is everything I need.. good work
Oh Cool bro congrats 👍🏼 and Yes there’s lots of potential on these trucks, and Thanks!💯
Gotta put some time lapses in here big boss. Great video though.
Appreciate it👍🏽
Cowl hood
That would be cool later for sure
Wish I could get the steps from you I need some! I like the steps!
I feel you bro, they are pretty heavy to ship lol but I have them in Houston. It does make it look lower with the steps👍🏼
where you get the Denali moldings from
I got them at a salvage yard, sometimes you can find them there or on marketplace as well
Bad ahhh thanks sharing 🔥
For sure No problem!!💯💯💯
Can you post link for the rear wheel fender guards. You've inspired me to make several changes to my Tahoe and I really appreciate your videos!
I haven’t seen any new ones I purchased mines used, they are from a 00-06 GMC Yukon Denali rear quarter panel moulding. I hope that helps and glad the videos inspire and Thanks!!💯💯💯
Thank you, I appreciate your response. We have a nice auto yard near by I can rummage through. 😁
@@scottmoore765 No problem! And nice you’ll probably be able to find some nice stuff there!🥶
Those are dents caused by you pulling on the molding
No I’ve done all my trucks like this and they don’t have dents
Can’t find NorCal springs, are there any other options similar?
I’m not sure if any other ones that are that low besides cutting them which I don’t think would ride good, I believe he is selling all his items through Instagram now.
Running boards will make it look lower, if thats the look you're going for
Yeah I want to lower it later on but don’t like the look of the sidesteps so I just took them off
@@MiGo713 where did you order the ss front bumper? Do they mount right up?
Nice truck but does it run fast or it’s all looks?
Thanks, It’s a work in progress
About the third brake lite, by law it has to be there.
👍🏽
Aren't you going to lower the suspension?
The truck is not complete I’m still on the process
What year and make is the bumper from
The front or rear bumper?
Stop saying "you know" good content
👍🏽
dope truck bro 👍🏾🔥
Appreciate it!!💯💯💯
whats the link to the parts you added to the rear bumper ?
Not sure which parts? The Escalade pillars and rear bumper are from a 01-06 Escalade. The lights for the pillars and license plate I make and sell on my Instagram @migo713
@@MiGo713 appreciate it
I see you bro!!! super clean 😎👌
Glad you like it! Thanks!!💯💯💯
Bro I still don’t get how you put on the ss bumper
You just slide it on top of the factory bumper, all you have to do is remove the bottom plastic valance and fog lights on the factory bumper
@@MiGo713 where did you order it ?
@@j6shy_987 I got mines used but this is the same SS bumper #ad amzn.to/3JWYCLv they come primered so you just need it color matched and it slides right on top, I just added 2 Tapping screws on the sides to make sure it wouldn’t come off👍🏼
You right it looks better without the running board
I believe it gives it a cleaner look👍🏼
What drop would you do?
I want something low maybe like my Yukon 5/7 or similar
You sell the gmc cowl hood?
No
get rid of the orange go blue or red
That be nice but you get pulled over in a second
Can this aftermarket grille work for a 2006 gmc yukon ? (Also I’m a fan of your content on this channel) 👍🏾🤗
It will not fit the Yukon sorry, but if you have the Yukon the Denali Grill looks good color matched also, and the leds can be added the same way to make it stand out. And Thank you!! I’m glad your enjoying the the channel!!😃👍🏼💯💯💯
aye bro js you don’t have to do it but wit that grill i would get a set if them projector lights have them say “tahoe “ and hind in in the grill so it shows on the black condenser you painted if you would want that js
Yeah later on would be good for sure, If though about that before but may on the transmission cooler I need to put one later on, and appreciate it should look nice👍🏼
Clean
Thanks!
We’re did you get the led for the grill?
They are the custom Led I use to make the led Pillar kits👍🏼
@@MiGo713 so if I get the Pilar kit would it be possible to do that grill mod ?
@@anthonygamez9905 yes
Looks nice but if you were going to do all that should of just got a Escalade
Thanks! No I didn’t want a Escalade only small parts of it
Led lights in the grill look fantastic, send the link please
Appreciate it, I don’t have a link for them I customized them into the grill
Looks good bro do you have a link to the ss bumper?
Thanks!! Yes it’s #ad amzn.to/45P39YH
You should do the brake ducts in blk to break up some the gold
Yeah I’ve thought about it sometimes👍🏼 maybe if I get find me a black set of pillars I can try out for sure
I got the SS Street scene bumper cover on my 2002 tahoe.. I also have the ss rea bumper cover if you need it...Nice work
Nice Bro! And Thanks!💯 I appreciate it, it think it’s ok with the Escalade bumper but Thank You!
Will it fit on a suburban?
@@AdanReal-vm7dv sure
Love the build bro and love your film style
Nice to hear that! And Thanks!!💯💯💯
Is the grille for sale?
Yes they are here #ad amzn.to/3rjc6dZ I took mines to get color matched and I added the extra leds also👍🏼
Damn that’s clean
Appreciate it💯
Do you know what brand those purple leds are or where you got them from? I don’t see a website link.💡🟣
It was a while back I believe they updated them, but yes #ad amzn.to/3r7SxoM