Here are the #ad links to some of the tools & parts which might be required to perform this repair: 1. amzn.to/3w7f7wm | Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger 2. amzn.to/3jYdb4w | Crescent 3/8" Drive 72 Tooth Quick Release Flex Head Teardrop Ratchet 11-1/4" - CRW10 3. amzn.to/3mMxeEV | Engine Splash Shield for HYUNDAI SANTA FE 2004-2006 Under Cover RH 2.7L Eng 4. www.amazon.com/s?k=B000CAVE08&crid=17527F8636065&sprefix=b000cave08%2Caps%2C67&ref=nb_sb_noss | Bando USA 6PK1700 OEM Quality Serpentine Belt 5. amzn.to/3CE6T0Z | DURATECH 3-Piece Ratchet Set, 1/4", 3/8", 1/2" Drive Ratchet Handle, 90-Tooth, Quick-release Reversible, CR-V, with EVA Organizer
Good video for the Hyundai's that have one serpentine belt, I have a 2004 Hyundai Santa Fe and there are 2 belts, one goes to the alternator and around the ac compressor then back to the crank and the other goes from the crank back to the power steering and around a tensioner. The belt that goes around the alternator has an adjustable tensioner pulley and you need to loosen the 14mm bolt in the center of the pulley and then under the pulley there is another 14mm bolt that you tighten to make the belt tighter and loosen to make it looser. Once you get the correct tension you tighten the bolt in the center of the pulley and you should be good.
You did a great job I have a 2001 Hyundai Santa Fe that I have to go through the same thing I need to change my belt. Great job great video very pleased. Thank you so much.😊
Im about to do mine now. Im hearing a noise that sounds like a bearing so I need to take off my belt to see if one of the pulleys is going out. Wish me luck..
Most likely that noise could be the AC compressor pulley or the alternator pulley or the alternator itself. Might also be the water pump inside but that's a huge job. Good luck...
@@EyeOnAiman the water pump and timing belt were done two years ago. Which im glad because thsts not a fun thing to do.. I changed the idler tensioner today it was rubbing through the timing belt cover..thanks for the heads up.. Much appreciated
Here are the #ad links to some of the tools & parts which might be required to perform this repair:
1. amzn.to/3w7f7wm | Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger
2. amzn.to/3jYdb4w | Crescent 3/8" Drive 72 Tooth Quick Release Flex Head Teardrop Ratchet 11-1/4" - CRW10
3. amzn.to/3mMxeEV | Engine Splash Shield for HYUNDAI SANTA FE 2004-2006 Under Cover RH 2.7L Eng
4. www.amazon.com/s?k=B000CAVE08&crid=17527F8636065&sprefix=b000cave08%2Caps%2C67&ref=nb_sb_noss | Bando USA 6PK1700 OEM Quality Serpentine Belt
5. amzn.to/3CE6T0Z | DURATECH 3-Piece Ratchet Set, 1/4", 3/8", 1/2" Drive Ratchet Handle, 90-Tooth, Quick-release Reversible, CR-V, with EVA Organizer
You shoulve loosened the two bolts that hold the tensioner ! It woulve made it easier to remove the belt.
I like your video where is the other one how to install it
Good video for the Hyundai's that have one serpentine belt, I have a 2004 Hyundai Santa Fe and there are 2 belts, one goes to the alternator and around the ac compressor then back to the crank and the other goes from the crank back to the power steering and around a tensioner. The belt that goes around the alternator has an adjustable tensioner pulley and you need to loosen the 14mm bolt in the center of the pulley and then under the pulley there is another 14mm bolt that you tighten to make the belt tighter and loosen to make it looser. Once you get the correct tension you tighten the bolt in the center of the pulley and you should be good.
You did a great job I have a 2001 Hyundai Santa Fe that I have to go through the same thing I need to change my belt. Great job great video very pleased. Thank you so much.😊
Maybe you can change the position of the tensioner when you get the belt out from behind it?
A safegard you can add is the tire wheel that was removed. Especialy on road side spare intall
You can loosen the tensioner bolt to get clearance for belt.
Really good informative video.
How to remove, cut it. LOL. Thanks for the video. It helped me to learn how to install.
Im about to do mine now. Im hearing a noise that sounds like a bearing so I need to take off my belt to see if one of the pulleys is going out. Wish me luck..
Most likely that noise could be the AC compressor pulley or the alternator pulley or the alternator itself. Might also be the water pump inside but that's a huge job. Good luck...
@@EyeOnAiman the water pump and timing belt were done two years ago. Which im glad because thsts not a fun thing to do.. I changed the idler tensioner today it was rubbing through the timing belt cover..thanks for the heads up.. Much appreciated
Hai, can I know, what number part the serpentine belt Hyundai Santa Fe 2,4 L 2003. Thanks
Thank you for your video
ممكن مساعده أريد فيوز شحن داينمو ماأعرف وأين مكانه سنتافيه موديل 2001 2006 كله نفس الموديل
That's a wrong way, because we can cut the new serpentine belt and have bad problems after.
Can you elaborate on what is the right way ? please
❤❤❤❤
Hi
벨트끼는게 무슨큰 기술이 필요하다고
개나 소나 다들 유투부 에 올리나
돈벌이가 되는가.