Very nice! Yes, a plan set would be good or a link to dimensions. Quite a bit of work, but what a fantastic result. Thoroughly enjoyed watching the video. Well done!
Did you know, sir, that I watched this video more than 20 times and felt just pleasure and suspense. Thank you so much you are creative and inspiring. Thank you for your generosity, because you shared the plan
Great job! Amazing in its simplicity. As a beginner in the woodworking trade (as a hobby), I look forward to turning the making of this bandsaw into one of my first projects. What is the thickness of the plywood you used, ⅝", ¾" (16 mm, 19 mm)?
yep, no problem. all holes in gluing parts are cutting for largest engine size. there can be difficult with screwing nuts back... but I think it mustn't be problems with engine soon
right blade, lower rpm would do. instead of mounting the motor directly you can use a pulley system, which would allow you to use the saw for both wood and metal.
Amazing, can yo u provide the sketchup file, some diameter on pdf not apeare on it, Kike a diameter to adjust the upper wheel, i have a cuttin pieces but not finish for that
Лучше по чертежам посчитать, чтоб не ошибиться. А лучше всего после постройки померить фактический размер. Я так на на 5 мм длины ленты не угадал. Теперь не очень удобно менять полотна.
Good idea ..but a bit ironic! Cheap tool built with assistance of so many expensive tools !! If you can buy so many saws...why bother build a cheap band saw? USD 300 band saw is decent enough for light tasks.
zurdok I would also like to know this. That is one of my main challenges in starting this project, or similar bandsaw, myself. I've seen people in other videos use old washing machine or clothes dryer motors, motors off other tools in their shop, and even hand drills for smaller ones. As a matter of fact, I actually thought the motor in this video was a repurposed handheld router untill about halfway through. To buy a motor seems expensive, at least for me, and I don't know what I need when it comes to power, rpm, or quality. Also, some people use a belt and pully drive as opposed to a straight drive; is the purpose in doing this simply to change the rpm or does it serve some other purpose? These are the questions that haunt me. I really love your video, especially the music. This is actually one of, if not "THE" best bandsaw build I've seen yet. It seems to be great quality and sturdily made with simpler design than a lot of others out there. I want to try this my soon. Bravo to you Sir! And have fun with your new toy/tool. PS: We never grow out of toys, they just get more expensive and dangerous.
Muy bueno el aporte, te saludo desde Lima - Perú, y te agradezco a nombre de los que hemos visto tu trabajo y no han podido agradecértelo, solo faltaría el detalle de los planos, si pudieras enviármelos a mi correo personal herminio2016romero@gmail.com o el de mi centro de labores hromero@jjcagricolas.com te lo agradecería infinitamente, suerte y sigue para adelante, Saludos!!!!!!!
Well done, excellent video, calm and precise easy to follow.
Very nice! Yes, a plan set would be good or a link to dimensions. Quite a bit of work, but what a fantastic result. Thoroughly enjoyed watching the video. Well done!
With the easy Tools you are using you are very precise. Awesome job!
Have you ever enjoyed good food? That's what I felt when I watched you build the machine so beautiful!
Thank you!
Very nice project, but please consider installing some blade and wheels guard. You ask for trouble.
From Vietnam: you really did it well! Liked and followed
Its great to see that not everybody is building a "Matthias Wandel" bandsaw... :)
Did you know, sir, that I watched this video more than 20 times and felt just pleasure and suspense. Thank you so much you are creative and inspiring. Thank you for your generosity, because you shared the plan
B
حسام صوفي Kim Iola
Nice job, looks like it works pretty well.
Excellent job! Now that I know it can be done, I'll buy a factory unit.
This works better than my branded bandsaw
Very nice job. Just a question, is the band saw blande 1900mm lengh?
carlos de argentina hermoso trabajo te felicito
I like your work !
Facilmente executável, simples e funcional. Parabéns!
WTF - i'll be watching you. great job!
GREAT JOB MAN LOVE IT
Very good job, congratulations
wonderful!now you wont have to cut circles with your saber saw!
Looks awesome but didn't you trap the motor in at the bottom when you glued the frame? You'd have to destroy the whole thing if the motor broke no?
Looks like an interesting project - unfortunately the music was just too annoying and nerve wreck to watch more than a few minutes.
Mute the sound, uh dur
awesome! great work!
you done a very good job can you tell me how long is the blade thank you
Hi, can u tell me size of blade saw? 8" or 14" or... thanks
Hi, check out description, there is draft with measurements
Приветствую!!!Koss,подскажите,лента долго работает или рвётся?
Great job! Amazing in its simplicity. As a beginner in the woodworking trade (as a hobby), I look forward to turning the making of this bandsaw into one of my first projects. What is the thickness of the plywood you used, ⅝", ¾" (16 mm, 19 mm)?
great project...can you tell what is the depth of cut for this bandsaw?
It's about 120mm
That floating pair of arms tho
Фрезер из дремеля впечатлил, да и вся работа тоже.
very talented
Very good job ! Congratulations from France .
nice work.
but can u change the engine after gluing?
yep, no problem. all holes in gluing parts are cutting for largest engine size. there can be difficult with screwing nuts back... but I think it mustn't be problems with engine soon
hello. good work. I'm making the same bandsaw. can u tell me your sizes for the wooden part?
Hi. Check the description, I added some drafts there.
Bellissimo lavoro, potresti inserire il progetto completo di tutti i pezzi. Grazie
Браво брат....България!
Brilliant and simple build, like it:-), thank you my friend
This is a nice job. Thank you.
Very nice!
Very good! There are drawings of the bandsaw?
Well I have some autocad side plans
Question that I have, is the draft in cm, mm, or inches?
all measurements are in mm
Thanks for the rapid response. You have an awesome channel.
good work thanks
0:52 rip in peace lil pencil
Boa tarde. Excelente trabalho. Qual a potência deste motor?
Hi, very nice work. This bandsaw is suitable for cutting carbon steel for knife making? or something should be modified? Greetings from Argentina!
For cutting steel you should use blade for metal. And low speed motor.
Подскажите пожалуйста толщину используемой фанеры? А 1500 оборотов не многовато?
15mm
very good like it ...
good job
hey there wow looks great out of interest sakes, could you cut metal with it?
right blade, lower rpm would do. instead of mounting the motor directly you can use a pulley system, which would allow you to use the saw for both wood and metal.
muy bueno.. las medidas porfavor
Many thanks :-)
Muy gran trabajo pero falta como siempre las medidas del cajón.
nice sound !
nice work man
bonjour ou on peut se procurer les plan merci
what is the length of the blade?
Amazing, can yo u provide the sketchup file, some diameter on pdf not apeare on it, Kike a diameter to adjust the upper wheel, i have a cuttin pieces but not finish for that
Большое спасибо за чертеж, не подскажите какая длина ленты?
Лучше по чертежам посчитать, чтоб не ошибиться. А лучше всего после постройки померить фактический размер. Я так на на 5 мм длины ленты не угадал. Теперь не очень удобно менять полотна.
hola ..muy buen proyecto ya tengo las medidas solo me falta el espesor del contrachapado gracias
приветствую, скажи, пожалуйста, как верхнее колесо запустил,чтобы обточить его болгарином? нижнее, на моторе вращается, а верхнее?
верхнее вращается от трения болгарки
Koss т.е. ты ему торец шлифуешь, оно от этого вращается? как же оно тогда выравнивается?
нижнее я обтачивал также, не включая двигатель. по моим наблюдениям так даже лучше
Koss хорошо, спасибо, буду иметь ввиду
What is the song that sounds like strqnger in a strange land
awesome build... one question how thick are the layers of the body?
Perry como
Good idea ..but a bit ironic!
Cheap tool built with assistance of so many expensive tools !!
If you can buy so many saws...why bother build a cheap band saw? USD 300 band saw is decent enough for light tasks.
it's a diy project Bro, perhaps for fun
If all body is glued.How can you access to take of the motor? Thanks
You see the circ saw guide move about 1-2mm at 0:10... ooft
hello. i from brazil
Hamilton C hallo I'm from Syria
igual o tamanho desta chapinha que VC coloca porá nivelar a roda
thank you for my next project
Really Amazing - How did you got the upper wheel rotated to sand it down?
That's what I want to know too.
I think it's starting spinning by itself due the rotation of the angle grinder
Jörg Müller
what engine is used for this tool ?
zurdok I would also like to know this. That is one of my main challenges in starting this project, or similar bandsaw, myself. I've seen people in other videos use old washing machine or clothes dryer motors, motors off other tools in their shop, and even hand drills for smaller ones. As a matter of fact, I actually thought the motor in this video was a repurposed handheld router untill about halfway through. To buy a motor seems expensive, at least for me, and I don't know what I need when it comes to power, rpm, or quality. Also, some people use a belt and pully drive as opposed to a straight drive; is the purpose in doing this simply to change the rpm or does it serve some other purpose? These are the questions that haunt me. I really love your video, especially the music. This is actually one of, if not "THE" best bandsaw build I've seen yet. It seems to be great quality and sturdily made with simpler design than a lot of others out there. I want to try this my soon. Bravo to you Sir! And have fun with your new toy/tool. PS: We never grow out of toys, they just get more expensive and dangerous.
BRAVO !!!!
Good job - Well done mate - Bravo ! *thumbs up*
Qual o nome da primeira musica?
E
Parabens pelo Trabalho!!!
What grade plywood and what is its thickness?
can we get a link for motor or a manufacturer name plz?
What size is the base and tray? Not shown on the draft.
да работа супер..... а за чертёж-------нет слов...супер
very beautiful and good job
What do you think about my band saw? On my chanel.
@@user-nv7gh8id5j where is the channel link
ola amigo vou tentar fazer uma igual a sua o compensado gue você usor e de 15 ou de 10 milímetros obrigado pelo o apoio
perfect
Привіт, а які розміри полотна? Дякую.
Как толстой фанеры?
I'm still waiting for the cheap part?
Show ficou muito bom perfeito
gracias por la respuesta yor the best we w. more video
Awesome Job
можете ли вы сказать мне, motor skolko oborot i skolko wat nado ?
1500rpm 370 watt electric motor
Great video, thanks. Terrible music....
Como fazer uma tico tico de bancada com serra fita
good job!
Hi! How you tune the angle of top wheel? :)
А К that’s the point of the saw...😕
Good effort. I remain confused, though.
Where to buy the elktrec moter??
O musica chata ta loco e som rsta horrivel Mais o serviço esta joia
Что за трек с 10 мин?
Cheap DIY bandsaw, *(if you have a all that machines and workshop)
wat the motor capacity and Rpm please
500W 1500rpm
Привет, сэр, можете ли вы сказать мне, что в единицах измерения указаны эти номера, goo.gl/Ok035C?
Благодаря!!
in millimeters
que bacan
I would rather buy a band saw
would be good vid without the crap music
Muy bueno el aporte, te saludo desde Lima - Perú, y te agradezco a nombre de los que hemos visto tu trabajo y no han podido agradecértelo, solo faltaría el detalle de los planos, si pudieras enviármelos a mi correo personal herminio2016romero@gmail.com o el de mi centro de labores hromero@jjcagricolas.com te lo agradecería infinitamente, suerte y sigue para adelante, Saludos!!!!!!!