Side Show Bob Strikes Again
Вставка
- Опубліковано 5 жов 2024
- walk in freezer down on a sunday afternoon, lets see what side show has done.
if you would like to buy me a cup of coffee www.paypal.me/...
My pocket knife amzn.to/3VWsnmc
Knee pads amzn.to/3xAecJw
#hvac
#refrigeration
#repair
#gopro
#shoptherealdeal
Join this channel to get access to perks:
/ @norcal-refrigeration
You should make sideshow bob stickers and stick them next to all the hackery on the equipment
Yeah bc a customer would love thay
Awesome technician. Huge respect from Australia
We do know that the txv issues separate refrigerant the the system it is connected to. Theres side show bobs everywhere lol thanks for sharing
I have a sideshow Bob in my area. Used to work with him and did not like it. He would do things just like that with wrong refrigerants, when there was two conduits going to a condensing unit on a roof just punch a hole in the side and run the wires through the hole with no bushing or conduit connector, even would go out to his coil change out jobs and find some of them with the solenoid installed backward. Kept telling the boss to get rid of him or keep him away from refrigeration jobs, well I got canned and now work for his competitor and he has lost all but one major account. Talk about sticking it to the man.
Punching a hole in the side of a conduit to add a wire. I never even thought of doing that. How creative!
Samething here I was referred by a actual combi oven manufacturer to the company I work for now and next month I will be taking all of my old customers back sucks to be them I handled all of the service in my area during the Pandemic and afterwards they hired a branch manager that has no prior service experience he only had management training multiple customers complained about him but when I refused to do something dangerous and I reported him to HR he fired me so I had to wait for a year before I can take my customers back.😂😂😂😂😂😂😂
im just gonna start telling people i melt ice for a living. great video bro
Haha the worst part about the job 😂😂
And work on junk
Looks like you should be sending a thank you card huh? Wouldn't of had a call without him aye? 😊😊
I usually change bracket and blade and throw in a 9721 style motor
The original 9721
Those 2 speed motors are EXPENSIVE! You ever think about replacing with just a single speed and pulling the other wire off of the relay?
Do that all the time. Make callbacks later, less likely
he is not side show bob,he will spend the 548.00.
Damn sideshow Bob, must've been trying to braze with Propane😭😭😭‼️
😂😂😂🔥
working ~ 10 years with propane. any problem with it?
Dave keep up the good work you make us good guys that do it right shine
We got Chuck in a truck here in Indiana. 🤣🤣🤣
You could leave a couple of rakes around the unit, should sort out your sideshow problem 🤣
Alco and Danfoss txvs are a pain, I really like the sporlan cause of all the interchangeable parts they got
I have seen a chuck in a truck put r22 in a 410a unit
The joyful works of SIDE SHOW BOB 😂
Enjoying laughing with you and Coffee and Thank you to Side Show for allowing us to laugh at his expense and customers 😜😀🤑🤑🤑💯
I got the plug for that motor. It's called a regular $50 packard PSC 🤣🤣🤣🤣🤣🤣🤣
That’s what I’m talking about 🤘⚡️🤘
That Feildpiece vac pump could suck start a Harley
The US motors EC5409E works for those, only $145 instead of the $500 Russel motors. I've been seeing them in Russell condensing units too.
05:11 I don't think that constitutes a violation of EPAs prohibition on venting.08:28 Apple has a hard time focusing on anything...Good job, a little entertainment for a slow Sunday morning. Thank You...
Great work! Hopefully you can get out on the bike today!
👍👍👍
🤘⛽️🤘⛽️🤘✨✨✨
8:33 ah the old McMillan and Wife motor
I did that that was me 🤗🫢🤷🏻♂️
I knew it.
@@NorCal-refrigeration😅🤷🏻♂️
We need Side Show Bobs in order to recognize the Super Techs. 🤣🤣🤣🤣
EC5412E I had the same problem finding that motor
Thank God he Labelled it. made your job easier. But Yea , He must be very old & almost blind to not see the 448 tag & the crappy weld. definitely a very old & almost Blind guy. would have liked to see more on side show bobs welds , bubble test & start up. but i guess all went well. thanks for showing the hackery. crazy. unit can't be that old being 448a too. wow.
I replace with the Russel psc motor mount and shaft fan blade. Last forever and cheap af to replace.
I noticed the Manitowoc water level sensor when you grabbed the mapp gas. Do you changed those a lot? For the price I was thinking of keeping some in stock. But Ive been lucky that they have just needed to be cleaned. Great video. You should see the crappy refrigeration in Florida. 90% have the X wire pulled.
disconnected X is not helped by consistently faulty bohn fan delay/termination switches. the solution of course is to replace the damn switch not bypass it, but try beating that into everyone elses heads...
It’s the same here X is gone
I interchange all the 404 and 448 freons.
Never an issue with expansion valve. Look at the PT chart and you’ll see the two freons are very interchangeable…
Heres what rsd says By following equipment manufacturers' recommendations and Honeywell's guidelines outlined in this publication, service technicians can readily retrofit many existing R-404A and R-507A medium- and low-temperature direct expansion refrigeration systems to R-448A.
If your mixing gas types your the sideshowbob lol😂
early on they said retrofit 448A into 404A systems, but there was trouble with the txv's not working well enough, so they went to saying use R-22 txv's!
now of course they have TXV's directly listed for each (go figure), more pipe-dream bull-snot driven by the green thumpers. we should see how green they are when they have all rotten foods. 🤣
@@andykuehner2772 not mixing gas. I’ve used several expansion valves that are 404 and 448 and never had an issue. The PT chart of those two freons are very very similar.
@@andykuehner2772 I guess my comment wasnt that clear
😂😂😂😂 damn side show Bob. Good job Dave. What In the world made that guy think it was 404? Does he not know how to read or what?? Atleast he was kind enough to label everything for you 😂😂😂😂. You just gave me a good laugh on this Sunday. 🤘🏻⚡️🤘🏻⚡️🤘🏻⚡️.
Probably doesn’t stock 448a.
Yea and his boss made him change it instead of buying the correct refrigerant or he ordered him to do it.
He wrote a note there, said unable to properly braze
At least kind enough to write it down That's rare these days 🎉
Good stuff Dave
Sometimes. Over. Night 😂 tech
Lotta dudes out there will tell you 404a runs the same but I’ve tried it and that shit never runs right. You’re right homie if it says 448 put 448 in in mfer haha
Hey! that was some of my best work!
I knew it 😂😂😂😂👌
Those motors are also $$ and trash. I just pull the red wire and run the fans high speed 24/7 w/ fasco 9721
Were I live sideshow bob installs residential ac units for walkin box’s don’t feel so bad cause you can always feel worse 😂
Do you live in Eastern NC? That what we have here in some places
@@dimitritrotsiuk3897 I live in Florida moved here 8 years ago from Maryland shocked at the things I see adds a whole another aspect to the trade as if it wasn’t enough having to justify and explain things lol
Jump the gun,would have been nice a before and after,refrigerant wise.both low temp.ice up could have been the evap motor.thanks for sharing.
🇺🇸💪❄️👍
You are asking side show bob,what motor to use so it would be cheaper,LOL.
No asked who has the plug for oem motor which I overnight in. 😂🤘😂
No dude that is chuck in a truck.
🤣😂🙃getting getting my 109 back hahaha
Gas ⛽️ is going to hit the roof this summer 5.49 a gallon already here in CA.
Side show Bob needs to go to school again.
I hate when people do stuff like this. Pisses me off because they are the ones that tell you that it doesnt matter or you are too picky 😒.
I call side show bob the "lazy expert"
What’s your thoughts on supco sc88 oil additive to unstick the TXV it’s got me out of a few jams. What’s your thoughts?
Love ❤️ it. Use it alot
Damm so wrong man 🤣😂
404a, 448a its all refrigerant, right?😅
Hillbillies had their hands on that unit.they must of used a bik lighter to braze that connection lol dave 😂
Supertech move dave
SOME PEOPLE ARE NOT BELONG TO THIS TRADE 🤬 LIKE SIDE SHOW BOB
Dave to the rescue
I hate those motors they go out all the time must of our subways have them
Wow what a hack, Imagine if he actually does that for a living, he could make you rich going behind him
Maybe Bob just lost his glasses? Omg
Sideshow Bob may have a service manager that is a bean counter and because he did not have a jug of 448a and his service manager ordered him to recover the charge and weigh in the 404a refrigerant because he was going to authorize a new jug of 448a for this call. I speak from experience I had a service manager that wanted me to mix refrigerants and when I refused he ordered me to so I went to his boss and when he found out he cussed me out and accused me of snitching so when I reported him to HR he fired me. He had no service or mechanical experience but he was a service/branch manager that was only worried about the dollars not the safety of the customer or my safety.
Great comment 🤘🤘
183 thumbs uP
Over 20 deferent refrigerants are used now and freezers are always emergency job. I don,t blame Bob to not respect codes by the book. The leak is how ever un forgivable to deny. Wrong refrigerants of the same pressure group will cause HUNTING or un stable supper heat, but does the job. You are how ever a gold pot for customers who are lucky to know you man.
On a Sunday 😂 BS!
The fact he/she actually writes what they’ve done just shows incompetence.
Now his brazing skills have a lot to be desired so Im not defending everything SideShow Bob did.
😂😂🤘😂
You should be pissed. Some idiot out the wrong refrigerant in the system and now you have to fix. Had it been done correctly, you wouldn’t be there. LIKE A FELLOW UA-camR Says” HACKS BRING YOU STACKS!!!
Hacks don’t come out on Saturdays or Sundays either
Be nice. Sideshow bob might not understand English. Or refrigeration.
👍
Here's some context to why this likely happened. 448A is the CA replacement for 404A. Per title 24 all major work to a 404A system needs to be converted to 448A. The problem is 448A uses a R22/407A TXV. So you can't just drop in 448A into an old 404A system or vise versa.
I know this. He probably doesn’t stock 448a however it’s way cheaper by 100$ a jug.
@@NorCal-refrigeration Since he wrote down is mistake with pride he probably doesn't really understand the PT chart or powerheads. If he did he could have dropped in 407A with no issues. I don't carry 448A myself. Just 404, 407A, and 134A.
If i read it right he put in 404A in 2020. So it worked perfectly fine for 4 years
@@B1gA1 Thats generally how it goes. A system will run with the wrong flavor or a hard start instead of OEM start componants for awhile. But eventually it kills the compressor.
@@B1gA1 I'm sure he checked that the evap fans were working,before talking smack.