China universal lcd/led tv board installation total tutorial
Вставка
- Опубліковано 7 лют 2025
- Popular Universal LCD / Led Motherboard installation guide.watch & learn .universal LCD TV controller board is a VGA/HDMI/av/TV/USB interface.you can almost every type of LCD (7 inch to 60 inch) can run with this Motherboard .Resolution: support 1920*1080 (max) Voltage of screen: 3.3V/5V/12V DC Power Supply.
I just bought a 8503 lcd controller board, the product readily come with free program driver board so it says no need firmware, but when I power on the screen, only white light and nothing happens, do you have any idea why? how do I check if the board really has a software installed in it?
I have laptop display of 40 pins and bought today universal controller board which is having 30 pins shouls i return it or it will work ? I am searching for LVDS connector but cannot find it
A question: In a Lg lcd tv ADJ is paired with A-DIM or P-DIM
I have a big Sharp Aquos lcd Display. Which Converter Should i use ?
Great choice of music. Helps with focusing on the vid actually.
do you use the inverters from the laptop
Hello I got B141EW04 V3 is this LCD is suitable for this controller board????
Can I use in 50" led monitor?
hi! what if the LCD panel has a thin flex cable for back light power input not a single 2 pin wire?
Hi. in the video you say that you will make a video on how to find the LVDS cable correctly. do you have a good link?
Yes ....don't worry as soon as possible I will upload some detail videos about it ,hope so next week. Good luck.
Hello, could you please advise me, I have an LG display, LC550UE SEF3, I bought a T.V 56.03 board, I can connect it. Thank you
Ok , your panel is full HD 1920×1080 resolution. So first you should need the right Lvds cable what your panel match. Connect the Lvds cable lcd to tv board ,set the panel voltage jumper 12 v. Enable panel backlight on . If your panel backlight not working please use a additional universel backlight board . update your board with 1900×1080 bin file throw USB .
I will try it tomorrow morning, Where can I find and download the bin file. Thank you very much for your answer.
Thank you very much for your help, it works thank you very much.👍👍👍👍👍👍
@@jiriandrle7473 most welcome......
im sorry, what if my display is LVDS (2 ch, 6-bit) , 30 pins Connector? will any board work?
I opened 4 monitor, the first 3 was not even compatible by LVDS cable, now I have a monitor which is compatible, but it has 4x 2pin CCFL, so 4 Lamp, but I have a 1 lamp inventer only, how to solve that? can I connect multiple lamps to one CCFL driver?
Hi, I have an old laptop screen (LP156WH4-TLA1). Can you suggest, from where to buy controller board for it?
Where are you wanting to buy from. If you leave in Bangladesh I can suggest you.try to find your local elections market or online shop.
@@rajibartstechnologymd.mahf9807 No...I live in India
Hi, could you help me? I have T.SK106A.03 and 1280x800 15.6 inch LTN154X3-L06. I cant find right firmware, on bangood or anywheare else, the only one i managed to find is for some suspicious 14.1 inch dispay, please help I really would like it to work and I dont want to lose this board by flashing wrong firmware
Is it possible to control kodi with the included remote control?
Can we connect it to laptops screen ??
what the IC (smd 8 position U1) dc-dc step down is at the power input 12v at slot 12v input from adapter (220v-12v)?what the his number-type& (thanks m-r)
Help me my inverter got a ccfl but my monitor has a 10 pin led wire.what should i do
What is that vertical line at the center of screen
Mera ek screen hai HT140wxb-601.. laptop on karne se backlight nahi aata h.. par picture ATA h. Should I proceed to make a TV with this screen??
How to enable HDMI-CEC feature in combo motherboards (ru 10.c816a)?
Can i use other tv board
all the displays needs inverter? or only lcd without led backlight?
I have board. I wanna install the firmware. I did it exactly the way you did but nothing happen. And there was no blinking? Can you please help me?
Is there one controller board for all screens for example phone tablets and tv
You should used a lvds converter board for that type of LCD ,than you can use this board.
My lcd has 3.3v input,what to do,do i have to use a 3.3v adapter for v56 panel?
Set the lvds jumper at 3.3v, watch the video I had already shown how to change lvds jumper setting on the board.
Can a universal board will be done back to its factory setting after flashing firmware but it happened the monitor was broken so that i could re use it to another good lcd tv
Bro, Ami je koto khushi hoyechi bole bujhate parbo na. Onek din dhore emon ekta tutorial khujchilam. Thanks a lot .
Md. Abdur Rahman Wahid ,thanks for watching.....
Can you make the monitor wireless ? Without the raspberry pi or any computer.. just with the screen and all the board
i have an universal lcd/led tv board v 53.03 and screen of 19" resolution 1366*768 can you send me a link where i can download the required firmware
You got it? I'm looking for it too.
Salam bhai 40 pin lvds cable laptop led screen ki universal board kah liye kahan say miljaygi
This lesson is so interesting to me. Good tutorial. thanks. I have a LCD TV. It has good pictures but the sound is not clear. It is giving terrible noice but nothing is clear. Do you think that this universal board will help me to solve the sound problem? Or is there a better way to solve this sound problem? I checked all adjustments on the TV but could not solve the sound problem. But my TV has no USB port but only the HDMI. Pls help me. Thank you
You can upgrade you sound with external speaker ,like sound bar .
@@rajibartstechnologymd.mahf9807 Thanks. Do you advise me to take the sound out to an external speaker and try it out?
@@rajibartstechnologymd.mahf9807 Do you think that this is a problem with the mother board? Pls advise.
Sir i need software of HDV56U-AS V2.1 I have searched on the internet but can't find it. Please help as soon as possible
Hi Mr.Rajib, is USB for connection as USB monitor or only USB Media player/viewer ? Thank you in advance. Nice video.
tv de lcd 32 aoc qual placa se usa e o chicote?
Sorry,I can't understand.
Please ask in english.
good morning I have a tv56 card. how can I watch digital channels on it? Iam from México
Great tutorial, thank you! How did you modificate the speaker cable? In my case I have a 8 pin set of 4 speakers and as yours the speaker port of the control board only has 4 pins and I don't know if I can do any modification and use this set of speakers in my project
Thanks for watching,
You can use 4 speaker ,2 speakers in series.
@@rajibartstechnologymd.mahf9807 Thank you very much! I'll search info for that operation, do you know any video or tutorial about how to connect 2 speakers in series?
Hi, my display's model is LTN150XD-L02, Panel Type: a-Si TFT-LCD , LCM, Lamp Type CCFL, I don't get the voltage info and will the board you mentioned work? and what type of cable and back-light board will I attach?
Can you use monitor lcd? not laptop monitor?
Hi, I have this type of TV, when i turn it on, it shows blue screen for couple of seconds and disappears. audio works but screen black out. after many tries, if it starts to work, then there is no issue. do u have an idea for that, thanks.
Check the LVDS cable & screen voltage.
Can that be use in a 7 inch 26 pin screen?
Sir in my monitor power supply have no adj it have only b-low,5v gnd ,switch but usme adj nai hai board me yahi 2pin lagni hai blow and adj please help me
Can I Use Laptop Charger In V56 Board For Power Supply...???
No, only 12v if you used more than 12v your board will damage soon.
thanks
hello, do you have the link for firmware? thanks
What if my TV56 is just switching on/off is it possible that it is damaged or the power supply? My nephew burned it by using 12v2A without noticing it is 12V41
Amar hp laptop(dv 9000) er 17 inch display ase oita ki tv banano jabe koto cost porbe .
About 2000 to 2800 BDT
Would you plz tell me that from where can I find these backlight and other boards or can I have to make it by my own what I do bcz im also in final process.help please
Where you from ?
@@rajibartstechnologymd.mahf9807 dear im from pakistan
I have a lcd screen. Model no. LP156WH3 (TL) (S2). Can you help me for selecting need full things for make a Tv.
6. Volt cable or 12 volt cable
Sir kya ye Mobo LG Philips Model No. LP154W01-TL A2 screen ke saath kaam karega.Pls Confirm.Thanks in advance.
Your screen Resolution is 1680 x 1050 so you can use v29,v56 board.if you found this resolution firmware than you can use it, there are just 2 type resolution hd (1366*720) & full hd (1920*1080) firmware available.
You can try 1366*720 firmware but you can't get full screen preview.
LTN156AT30-T01 e sob thik vabe lagiyechi but screen black ase...., but remote tiple led blink kore....onekkhon standby thakle off hoye jay....ekhon firmware install hoyeche kina bujhtechina..., please help me...2 ta board kinlam v56 model er.. duitay e same...
LCD backlight run ? If your back light ok then check the lvds cable & software .
Where can I get those circuit boards .. and wt is price for that
Mr. Please Help me, how to download the firmware software. the link you gave to video, it can't be downloaded again
why there is a state line it is lcdpanel fault ????
it's superb..! very clear, simple and easily understand
where can I find bin file v59 for lcd monitor LTM220M1-L01, please?
Hello, I have a query, my lcd model number is N154i2-l02 according to data sheet I have to use 1ch 6bit 30pin lvds cable, can I use 2 channels 6 bit lvds cable. Also what is the specifications of power supply to be used?
Thanks this is a very helpful video. Does this Universal Motherboard connect into the TCON board on a Sony Bravia KD55X8005C? The TCON Board connects to two boards on the LCD screen so the universal motherboard can not connect directly to the LCD screen.
You need one to two lvds output converter board.you can find on online shop.
So does this Universal Motherboard replace the main board and the TCON board? Thanks for your help Sir.
@@vpnrouter ,you just need lvds converter board .tcon board must used what your panel recommend.
una consulta, en el datasheet de la controladora V56 veo que dice Single/dual LVDS. Pero he visto una controladora LCD mas reciente el modelo mnt68676.2a donde tambien dice que es single/dual LVDS pero este agrega un dato extra que dice (8Bits). Mi consulta es: es lo mismo ? pues en la controladora V56 no menciona ese detalle.
Bro please explain in English.....sorry I can't understand your coments.
a query, in the datasheet of the V56 controller I see that it says Single / dual LVDS. But I have seen a more recent LCD controller model mnt68676.2a where it also says it is single / dual LVDS but this adds an extra data that says (8Bits). My query is: is it the same? because in the V56 controller does not mention that detail.
David saldaña if your screen has 2 lvds input ,you should use a converter card one in & 2 out lvds .but all screen are not supported. Old v56 card are not able to do it.new card are different...see the data sheet in online.
Do these boards come with the firmware .bin files on CD?
What is the voltage for 42inch screen?Help me
Most of 32 -42 inch screen are 12v used .see the data sheet on wed side.
I flashed dome firmware and they "worked good", but than I installed a wrong firmware and nothing work and I cannot flash anything else, could you help me?
Zazzo E Zozzo ,you got brick your flash memory.if you re firmware your 8 pin flash ic it will ok.for this process little bit tricky.you need to desolder the 8 pin memory ic & brun firmware with right chipset.you need to firmware Brunner also.
hola muy buen tutorial.tengo una placa tv 56031 y necesito hacerla funcionar con un panel t200w02 de 21 pulgadas y 6 lamparas.las lamparas encienden pero no se muestra imagen.de donde puedo sacar firmwares para probar?gracias
Neatly explained. Very helpful for learners.nag.
Anathar, btw, you removed the plastic that is not supposed to be removed, maybe that's why the first one didn't work
My LCD uses 20 pin LVDS. Can I use v56 universal control board to power my LCD. My lcd model no. Is LT121DKX7V00. I cannot seem to find the control board for this LCD.
You can use.Try this 20 pin lvds cable.
m.alibaba.com/product/60114657143/2P-to-colorful-20-pin-lvds.html?s=p&spm=a2706.amp_showroom
salaam, I've just encountered ur channel..
MashaAllah.. it's superb..! very clear, simple and easily understand tutorial..
I'm a noob to electronics.. but I always have the desire of learning it as hobby..!
Great video.. I've subscribed to ur channel.. you earned it brother.. salaam
Is it compulsory to do all the connections before flashing the firmware or I could flash firmware at any time by just connecting the pen drive and power?
Bipin Baglung ,yes you can.
NIce tutorial , can i message you i need some help to connect lvds cable , theres something ddc power, ddc clock and ddc data , where should i connect this on T.V56.03 ?
Hello Sir!
Please help me in a problem that i have encountered. I bought a v29 board on ebay for 10$. I found a bin file for my resolution online and put it on a usb stick. After i inserted the stick the led started to flash and it kept flashing. After 5 or 6 minutes i unplugged the power supply and now nothing works. I cannot reflash it with other bin file. I tried another bin file and the led does not flash. It doesn't want to reprogram. Please help me with my problem. Thank you!
I think you brick your main board.need to flash your 8 pin eeprom Ic.Never power cut when you update processes is running your tv board.if you that your tv board brick.
does this work with plasma t.v's
hey know of any other projects within the spheres of assemblies that I can run with to make good margins as well as a bridge into parts/products manufacturing (looking for exposure; Iron sharpens Iron)?
Mwango K ,good thinking....I will try to make different & solid state diy project next.......
@@rajibartstechnologymd.mahf9807bro i need your hand no my smart tv all channel are suddenly mute!!
@@sahabuddinmahmud1754 ,your sound are muted or there is no sound from your tv speakers ?
can you share with me lcd panel resolution?
What can you do with TPDV1240??plz help!!!
Is it possible to convert mobile lcd screen as TV? If yes, Then How??
(I want to make a digital peephole device). Any suggestion pls.
Dr. Mamunul Abedin ,possible but you need your phone tft display to lvds converter circuit board.
Rajib Arts & Technology Md.Mahfuzur Rahman @ অসংখ্য ধন্যবাদ। ট্রাই করে দেখি
The video will be helpful to repair the LCD LED TV.
how to install universal board U11.2 on my laptop screen which is LP141WX3(TL)(N1)?
Same process,try to find out its resolution on the google ,that's data & your board you got all the information.
"LVDS pin 1,2,3 should give voltage set by jumper." Can this voltage be measured in multimeter before flashing the firmware?
আমার কাছে একটা ল্যাপটপের ডিসপ্লে আছে। কোথায় আসলে আপনি আমাকে এটা করে দিতে পারবেন? আর কত খরচ পরবে আপনার সার্ভিস সহ? জানালে খুশি হতাম। অনেক ধন্যবাদ।
Thanks for watching, sorry brother I am not able to do physically that work but trying to help you with comments. I can also provide you all the components if you wants.
Hello, Nice video, when you buy v56 universal controller board, you need to buy Inverter board also, which come separately ? how much the Inverter board cost ? can you please reconfirm .......thanks !
Silas Paine thanks for your components.you should know what kind of LCD you have.there are many types of LCD backlight.if you have fluorescent tube than you need inverter ( high voltage) card. If you have led backlight then you need led driver board . Some led needs 12v dc some needs more, depends on your size of screen. If you asked me only for laptop or pc monitor
(10 -22) inch LCD ,the inverter or led driver board cost about 2- 5 us dollar.( in Bangladesh its cost 120-350 taka only).
Hi, Thanks for your reply. Inverter with output connector : High voltage - 680Vrms and Low voltage 0-18 Vrms , will it be compatible with my LCD screen with part no. LP154WX4 (TL) (C1)
Thanks
Silas Paine ,you need single channel inverter board, its very common. So don't worry just search on the net you can find all the board like same. You can use your laptop inverter board but it will not brighter at 12volt.
thanks. can this inverter also work ? www.ebay.com/itm/Universal-1pc-4-Lamp-Backlight-LCD-Laptop-CCFL-Inverter-10-30V-For-15-22-Screen/263014692288?epid=508111960&hash=item3d3ce5b5c0:g:c-AAAOSw8HBZMBHC , any issue to the lcd panel ?... thanks again
Silas Paine , first you should understand to the math, its really easy .just count how much bulb cable come out from your screen.if your laptop screen has one then should use only one bulb inverter.if 2 then 2,if 4 then 4 .hope you understand now.you can't open any port your inverter board. example - you have 2 bulb but can't use 4 port .cuz 2 port open & high voltage leakage risk. Or 1 build can't run with multiple port inverter board.bcuz those port using series in pair.
can you help in finding firmware for T.VST59.031 to useon M240HW01 V0 lcd panel resolution is 1920x1080. all i get when i hook it up is the orange light and thats it will not do anything. help...
Donald Henke ,please send your mail address. If I managed I will send you.
well explained video sir 👍
i have display model - N156BGE-EA2
should i use ccfl inverter or not ??
i need some help i have murphy tv 101cm model no 40s82f , it runs on 4.4.2 how to enter recovery mode and update to new software
Some tv company aren't want to modify their software.so some function you can't use.so reset the data from your settings & get fresh factory reset os.most of China android tv are not get update easily.so if your are not good at android os let it on default mode .if your any wrong steps brick your tv main board permanently. Ok best of luck.
Hair sir.. Ada firmware chimei panel M215HGE-L21
Where to buy?
Hi and congratulations on your videos. It could help me. I have a Thes 3251 btp TV and I would like to put the main board universal because the main one breaks continuously. My LCD panel has the number v315b1-L08 rev.c2. Could you please tell me if there is a compatible universal main board? And where to buy it? Thank you so much and sorry for the trouble.
From where to get this board?
bro can this use for lenevo thinkpad lap top display
Yes.....
Very good Video. Bhai IPS LED DISPLAY Pannel ki use korte parbo?
Romon Sarkar ,thanks for watching.if your panel resolution is 1920*1080 or below you can.
Sir in my LCD panel have RX0- RX0+ ,RX1- RX1+, RX2- RX2+, RXCLK- RXCLK+, RX3- RX3+ so sir where I connect in v56 LVDS pin odd and even I m confused in even and odd. Please help me about this. And sir universal board have clock in even pin no. 15,16 and 27,28 there is no odd clock pin please correct me if I am wrong.
Samsung LTN154AT01 Panel
টা আমি Universal LCD TV Controller Driver Board Use করতে চাই।
But,
Samsung LTN154AT01 Panel এ Net এ কোনো Datasheet পাচ্ছি'না।
আপনি কি আমাকে কোনো ভাবে Help করতে, পারেন??
Vro amar akta (Samsung S19F350HNW 18.5 Inch LED Monitor)Monitor ase ar jonno kun China universal lcd/led tv board nibo ?
Lvds pin config nahe ki apny..??
Sir can i use this on my compaq laptop lcd and also tell me where can i buy this product and what is the price
How can we know some what more from some chinese panels? Lots of them are simply so short as nothing on what informations concerns.
Carlos Almeida ,all Chinese panel tcon card,or LCD driver board has some code,find in google ,you must get information.
I want to connect my laptop motherboard lvds cable to monitor, is there any adaptor or convertor available for that? or can i solder the lvds cable to vga male throught 15 pin diagram and then the vga cable to monitor?
jayam nadar ,you need to know your laptop lvds pinout datasheet & your monitor lvds also, you can do your self.its little tuff .but as far I know there is no converter.
Rajib Arts & Technology Md.Mahfuzur Rahman
Thank you connecting directly the wires of lvds wires to vga male port! would it work? or we need a circuit for that as monitor already h power. I have have the vga cable pinout sheet.
jayam nadar ,no just lvds to lvds. Not VGA. If you want to connect with VGA than laptop main board VGA to monitor VGA.
Rajib Arts & Technology Md.Mahfuzur Rahman
yeah!! got you but my laptop would not boot directly to my external monitor. so im struggling to build this idea. though ive found it wont work.
you are subscribed......... you are excellent as your video......
Thanks you .
كيف بنوجد سفتويرالكرت عن رقم البنل وين الموقع يلي فينا نسحب منه بدون عراقيل
is this the same procedure on L.A.MV56U.A lcd controller board?
+Reynard Permejo ,chipset different but work principal same.