Hello , at 5:54 you showed you have to cut this for fitting Swift 1st gen steering . Do I need to cut that even for Swift 2nd gen/ celerio steering also ?
Hi buddy. Thanks for tuning in ✌ Yes I believe so. All the newer gen steering wheels have a comparatively larger dia of the mounting hub. Hope this helps. Drive safe 😀👍
I am regularly following you videos since I am also alto lover I have 2006 model lx alto ,and I feel your very talented and give very brief information about any modifications please keep it up 👍👍👍
The vehicle is bro alto 2011 model, can it be a 2017 model alto steering wheel, is there any problem with it, does the indicator not cut off when fitting the steering wheel, does the bottom have to be cut?
Hi Favas. Thanks for tuning in✌️ It's very much possible to install 2017 alto lxi or vxi steering wheel (non-airbag type) in 2011 model. Not to worry, the indicator auto cut-off would function normally since the mounting hub design is similar. Most likely the hub diameter would be same, so it might not be required to cut the bottom trim at all. Wish you the best for steering wheel swap DIY 😀👍
Hi Sachin. Thanks for tuning in ✌ Unfortunately no, it's not compatible. The column mounting spline isn't a match. Anyhow, the 3rd gen steering wheel gets airbag as standard, right from the base model.
Ever so seemingly difficult, the steering swap can yet be done. That is if you're up for some intricate modification. To say the least, it'd involve replacing the column shaft. Check out this nicely upgraded example ua-cam.com/video/DqMpRhjg3ws/v-deo.html. Get in touch with them if you can.
Hi Afonso. Thanks for tuning in✌ Bet that mod is a dream of all Alto lovers, including myself. However, unfortunately, it isn't doable. Firstly bcoz the column mount splines don't match. Secondly, the Swift steering has standard airbag. So it's near impossible to install and use in a non-airbag car like old Alto.
Hi Sandeep. Nayi Alto K10 ab heartect platform par upgrade ho chuki hai. Isliye mujhe lagta hai ki uska steering mount spline Alto se match nahi karega.
Hi Ragnar. Alto mein swift wala steering fit karne ke liye column cover trim ko thoda kaat kar uska diameter badhana zaroori hai. Isliye suggest karunga ki aap koi local garage se fitting karwa lijiye.
Hi Faiz. Thanks for tuning in✌ Unfortunately a direct steering swap is not possible since the mounting spline is different for the K10 and new Swift. However as is the case with all things, if you're really serious about the mod, then you could make it work. Check out this amazing video of a Zen with new swift steering -> ua-cam.com/video/vLTuWJcr2YA/v-deo.html The owner has provided the insta contact for the workshop in the description. Good luck and drive safe 😀👍
Hi Harsh. Haan change kar sakte ho. Yeh TBHP thread dekho shayad madad kare www.team-bhp.com/forum/diy-do-yourself/228196-diy-steering-mounted-audio-bluetooth-controls-1st-gen-ertiga.html
Hi buddy. Thanks for tuning in✌ You could install any steering which you like from and upto the 2nd generation models (pre-heartect). In all of those, the spline mount design is common. Though the dimensions of the hub in new steering could be different and some customization might be required when time comes to make it fit. Let me know if you need anything else 😀👍
Hi Swayam. Thanks for tuning in✌️ Waise toh direct installation possible nahi hai. Magar really chahiye toh fitting ho jayega lekin kaafi saare parts badalne padenge. Yeh channel ko contact karo, steering upgrade mein expert hain. youtube.com/@ircardecorzbangalore5261
Hi Deepak. Thanks for tuning in ✌️ Unfortunately no. It is not possible to directly swap and install the new swift's steering wheel in Eeco 2010 model. Drive safe 😀👍
after watching ur video my search is stopped because I also wanted to upgrade my alto lxi steering wheel which is 2010 model but I have one question.? my question is it possible to upgrade with zxi model ( steering mounted audio control ) because my first choice is zxi model.
Glad the video was helpful. Regarding your question, such an upgrade has multiple challenges and would be a big ordeal. 1. ZXi steering wheel has a different frame that won't take an ordinary horn pad. 2. Audio controls require a clock spring for electrical continuity. Adding that to Alto would mean hardcore modification. To allow for the clock spring, guessing the combination switch must also change. Refer this thread about adding audio controls in Ertiga bit.ly/3jcgLHA.
thanks alot for this link really helpful for me and I want to upgrade my combination swtch because of fog lamp switch is not available in this switch like k 10
Brooo......i have a doubt.....is it possible to replace ritz steering wheel with top model swift steering wheel ? Because i like the flat bottom steering wheel and i need the audio controls too...pls help me out...if it os possible, then can i do it myself..?
HI Subhash. This is a wish of many including myself. Unfortunately, the flat bottom wheel has different mounting spline. Still wouldn't say swap is not possible. Check out these nicely done examples bit.ly/37kjNXa, bit.ly/38whqRU. To install, guess you'll need to replace steering rod and also consider other parts (contact coil, combination switch, airbag module etc.)
Hi Joy. The steering should fit normally as the mounting spline is same. Additionally, the contact coil (clockspring) has to be upgraded. And for this compatibility needs to be checked and verified. Fyr check this out ua-cam.com/video/1VN45DfVyB0/v-deo.html. Seems to be expert in steering upgrade. Contact them for support if possible.
@@Autophile well that was super awesome 👍🏼much appreciated, but I think that dude upgraded the 2020 steering with Airbags but mine is non-Airbag model which would be useless. Rather buy a steering with controls that offers just plain plastic horn pad without the airbag built-in
Really great videos explained everything in details I'm planning to change my alto 2008 steering into Swift dizre D cut steering wheel basic one without any control on it I've a doubt whether it will fit or not ? Pls replay whether it ll fit ? Will I face any issues ?
Hi RVKRN. Thanks for tuning in✌. Am really glad you find the videos helpful😀. About the Swift's d-cut steering wheel, unfortunately it can't be installed in Alto. Basically, it won't fit on the steering column because the mounting spline is different.
I had a Maruti CIAZ and SWIFT earlier and currently I own a S-Presso. All these cars exhibit a common steering issue. After taking a turn to the left or right, the steering wheel does not return to the original position and each time I have to retract it myself to get the steering back to the original position. I also have a Vento where this issue never happens, after taking a turn the steering wheel returns to the original position perfectly. I have had multiple visits to both several authorised as well as outside service centres and nobody has a solution for rectifying this issue. Can this be addressed in any way, at all?!
3 parts required for EPS. Not sure about exact part code. Approx. price in new condition. 1. EPS Steering Column Assy. ~Rs.25k 2. EPS Controller ~Rs.8k 3. Wiring Harness ~Rs.4k Have it installed at Maruti service centre or local garage.
Hi Abuzar. Steering from previous 1&2 gen Wagonr can be installed. In current 3rd gen model, the steering has different mounting spline. So it will not fit in Alto.
Hi Mohammed. Yes, absolutely you can install Dzire 2G steering in Alto. Just be careful to get the non-airbag type. MGP genuine part nos. 1. Steering wheel 48110M74L01-5PK 2. Horn pad 48120M74L00-C48
Actually it's quite simple to do by self. First disconnect the battery negative. Pull out the horn pad by hand. Now if you don't have socket and wrench, then remove the horn bracket (3 screws) to gain access to the center nut and remove it using 17mm spanner. Take off the steering and install the new one.
Hello Vandalizer. New gen maruti cars on heartect platform, such as Swift, use a 33-teeth spline to mount the steering wheel. While conventional models, including latest Alto 800, continue with 30-teeth spline. So unfortunately a direct steering wheel swap is not possible.
The steering column shaft must be swapped as well, if feasible. Moreover compatibility has to be checked for related parts (combination switch, airbag, contact coil) and customize as required. Here's a reference video bit.ly/3MfpVjy
Hello AVS. Thanks for tuning in😃. The Ignis steering wheel is not directly compatible to Alto K10, primarily since the mounting spline is not common. To make it possible, one must first change the column shaft rod, for which professional help would be required. FYR check out this channel bit.ly/3pDNDMv. Has multiple vids on steering swaps. Contact them for support if possible. Also check out this video bit.ly/3ci9lT2. Hope it is of some help 👍
@@Autophile Hey Thanks a lot. I just finished watching the video and it's quite risky to do that as said by the guy. So I guess it is better to go with the old swift 2nd gen steering wheel.
Hi buddy. Sadly its not possible. Since the mounting spline has changed (supposedly owing to heartect platform), the new gen model steering wheels are incompatible for previous gen cars.
Check out this video though bit.ly/3BPiQ4h. New Swift steering custom installed in Wagonr 2nd gen. Guessing that the steering column spline shaft is replaced too.
I hate tata Indica steering wheel, it's not comfortable position holding, please suggest me any other model vehicle steering wheel for tata indica v2 please
Hi Shridatt. Thanks for tuning in😀👍 It's a bummer that your stock steering wheel isn't comfortable. Is it the four-spoke type or which one? To upgrade the steering, there goes two options: 1. swap the wheel with other tata model or 2. retrofit a new car wheel from other brand. Could not say much about other tata models with almost no knowledge. For other brand, I tried to compare with maruti steering from product pictures on boodmo website. Maruti steering for previous gen models (Alto, wagonr, swift, ciaz etc.) has a 30-teeth spline for column mounting and it appears like it's the same for tata indica v2. Back then maruti and tata might be using common design. In order to find out what steering can fit, you could get in touch with a local mechanic and try out other car wheels. Let's see how it goes and any further help needed, do let me know. ✌️
Hi Gagan. Purane sabhi models mein steering wheel mount standard hai. Magar naye models jinme airbag mandatory ho chuka, unme spline design badal gaya hai. Isliye new swift ka steering, kisi bhi pre-airbag gaadi ke saath compatible nahi hoga.
Hi Aadi. That's dream of us Alto lovers. Wish it was possible though. There is no direct fitting orvm or conversion kit. Yet to find a practical and VFM solution.
Hi Rahul. As per Insta DMs, I understand that your car is Alto 2012 and you have installed new gen Alto steering. While steering swap we may have to do some customization as I had done with column cover. In your case, new steering is mounted deeper and rubbing with column cover. To solve your issue, may I suggest to try & replace the column cover trims as well with this 48400M79G00-P4Z. Probably this cover would be shorter. Just a guess.
Hi Sumanth. Thanks for tuning in✌ Yes, these kind of steering wheels can be fitted in 800 very much directly 😀. However, as explained in the video, the indicator auto-cancel function would not get activated because the wheel hub is flat (does not have the two pins as in 800's original wheel). Probably, you could do try some jugaad to make it work👍
mere pas maruti A star hai 2010 model kya usme ye swift ka steering wheel lg skta hai kya jo apki video k thumbnail me hai no 4 pe dikh rha hai plz bataye wo steering konsi model ki swift ka mtlab kis gen ka
Hi Sahil. Thanks for tuning in ✌ Yes, that steering wheel which is from Swift 2nd gen can be fitted in Astar 2010 model. Refer these MGP part numbers and boodmo buy links Steering wheel : 48110M74LL1-GJL, bit.ly/30mcx9N Horn pad : 48120M74L00-C48, bit.ly/3AHDiSN
Actually boodmo jo hai woh OEM ke model parts catalog ke basis par bta raha hai. Yeh steering jo swift ka hai woh astar ke catalog mein nahi rehta, magar install karna possible hai. Jaisa maine video mein btaya ki steering mount spline sabhi purane models mein common hai.
Superb video brother 👌🏻 You explained each and everything so easily ❤️❤️
Hi buddy. Thanks for tuning in ✌️
Really appreciate that! I'm highly glad you enjoyed the video. Drive safe 😀 👍
Wow Very neat and clear explain.
Please do more videos on alto
Thank you very much😀. Surely there is more coming up 👍
Hello , at 5:54 you showed you have to cut this for fitting Swift 1st gen steering . Do I need to cut that even for Swift 2nd gen/ celerio steering also ?
Hi buddy. Thanks for tuning in ✌
Yes I believe so. All the newer gen steering wheels have a comparatively larger dia of the mounting hub. Hope this helps. Drive safe 😀👍
Awesome knowledge bro. Keep it up.
I am regularly following you videos since I am also alto lover I have 2006 model lx alto ,and I feel your very talented and give very brief information about any modifications please keep it up 👍👍👍
That's awesome. Really appreciate you taking the time to express that👍
Thank you very much for the support 🙏
Ultimate bro.. Thanks for responding for my request
Thank you! Cheers!
Nice 😎
Is it possible to swap eon's steering wheel?
Sorry, cannot say. Don't have any knowledge of the car. Btw what is the reason for swap?
Great bro..... good information
Glad you liked it buddy 😀. Thanks for tuning in👍
Excellent video brother 👍🏻👍🏻
Thanks👍. Glad its helpful to you.
Alto 800 Std model hai usme alto new model ka stearring wheel assemble ho skta hai ky with auto cancel indicator
Hi buddy. What's your car model year? And exactly which steering wheel do you wish to install? Could you please message at insta @autophileyt.
bhai ji 2012model alto me alto k10 ka setring wheel lg jayega kya agar lg jyega to kya indicater auto cancle work krega ya nhi
Hi Rahul. Haan lag jayega. Aur indicator auto cancel bhi work karega 👍
Agar aur doubt hai toh insta par msg karo @autophileyt
The vehicle is bro alto 2011 model, can it be a 2017 model alto steering wheel, is there any problem with it, does the indicator not cut off when fitting the steering wheel, does the bottom have to be cut?
Hi Favas. Thanks for tuning in✌️
It's very much possible to install 2017 alto lxi or vxi steering wheel (non-airbag type) in 2011 model. Not to worry, the indicator auto cut-off would function normally since the mounting hub design is similar. Most likely the hub diameter would be same, so it might not be required to cut the bottom trim at all. Wish you the best for steering wheel swap DIY 😀👍
Sar Bolero 2019 EX seven seater Hai usmein new steering install karvani hai kya fitting ho jayegi
Hi Siya. Thanks for tuning in👍. Suggest you to try with a local mechanic as I'm only a DIY fellow (not business).
Hi buddy can i install 3rd generation base model swift steering into 1st generation swift without airbags and also no steering mounted controls
Hi Sachin. Thanks for tuning in ✌
Unfortunately no, it's not compatible. The column mounting spline isn't a match. Anyhow, the 3rd gen steering wheel gets airbag as standard, right from the base model.
Ever so seemingly difficult, the steering swap can yet be done. That is if you're up for some intricate modification. To say the least, it'd involve replacing the column shaft. Check out this nicely upgraded example ua-cam.com/video/DqMpRhjg3ws/v-deo.html. Get in touch with them if you can.
What about that power window, is it an add-on?.
Hi Santhosh. Thanks for tuning in ✌️
Yes, the power window is a dealership add-on installed at the time of purchase.
Is it possible to swap new swift 2022 steering to. Old alto ,,.?.
Hi Afonso. Thanks for tuning in✌
Bet that mod is a dream of all Alto lovers, including myself. However, unfortunately, it isn't doable. Firstly bcoz the column mount splines don't match. Secondly, the Swift steering has standard airbag. So it's near impossible to install and use in a non-airbag car like old Alto.
Sir kya Alto 800, 2022 model m new Alto K10 top model ka staring lga sakte hai
Hi Sandeep. Nayi Alto K10 ab heartect platform par upgrade ho chuki hai. Isliye mujhe lagta hai ki uska steering mount spline Alto se match nahi karega.
Wow, Very usefull video for me. Thank You
Glad it helped👍. Pleasure is all mine 🙂
service centre wale steering wheel change kar denge kya . I'm planning to install 2nd gen swift steering on my 2011 alto
Hi Ragnar. Alto mein swift wala steering fit karne ke liye column cover trim ko thoda kaat kar uska diameter badhana zaroori hai. Isliye suggest karunga ki aap koi local garage se fitting karwa lijiye.
Hello , can the mounting spline of old Alto be change to install new Swift flat bottom steering
Bhai ciaz disel and petrol ke steering 1 st gen . Koi different hai?
Sab
Bhai new Swift ka flat bottom vala fit ho sakta hai?
Hi Vivek. Alto ke liye pooch rahe ho na. New Swift ka steering mount spline alag hai isliye fit nahi hoga. Shayad 33 teeth hain usme.
Ohk, thank you so much for clearing my doubt.
Sir, can we swap the steering of alto k10 with the new swift 2023...Is it possible.
Hi Faiz. Thanks for tuning in✌
Unfortunately a direct steering swap is not possible since the mounting spline is different for the K10 and new Swift. However as is the case with all things, if you're really serious about the mod, then you could make it work. Check out this amazing video of a Zen with new swift steering -> ua-cam.com/video/vLTuWJcr2YA/v-deo.html
The owner has provided the insta contact for the workshop in the description. Good luck and drive safe 😀👍
Bhai 2011 swift dzire zxi ka steering change kar me 2016 swift LXI laga sakte hai
Hi Harsh. Haan change kar sakte ho. Yeh TBHP thread dekho shayad madad kare
www.team-bhp.com/forum/diy-do-yourself/228196-diy-steering-mounted-audio-bluetooth-controls-1st-gen-ertiga.html
Which steering wheel is fot to baleno 1st generation plz
Hi buddy. Thanks for tuning in✌
You could install any steering which you like from and upto the 2nd generation models (pre-heartect). In all of those, the spline mount design is common. Though the dimensions of the hub in new steering could be different and some customization might be required when time comes to make it fit. Let me know if you need anything else 😀👍
Swift ka flat bottom steering wheel bhi lag sakta hai kya alto me ???
Hi Swayam. Thanks for tuning in✌️
Waise toh direct installation possible nahi hai. Magar really chahiye toh fitting ho jayega lekin kaafi saare parts badalne padenge. Yeh channel ko contact karo, steering upgrade mein expert hain. youtube.com/@ircardecorzbangalore5261
@@Autophile thanks a lot
Sir alto mai Swift 2g top model stearing mounted control vala lg jayega ja nhi
Ecco 2010 me hoga kya Bhai new swift ka string wheel
Hi Deepak. Thanks for tuning in ✌️
Unfortunately no. It is not possible to directly swap and install the new swift's steering wheel in Eeco 2010 model. Drive safe 😀👍
Whether is it possible to fit Swift steering wheel in Ritz?
Hi Suhail. Yes, its possible to install the Swift g2 steering in Ritz but the Swift g3 flat-bottom steering is not compatible.
Eeco 2017 model ka steering update kar sakte hai kya
Hi Om. Haan bilkul kar sakte ho steering update.
Old alto me new swift ka stearing laga sakte hai ky
after watching ur video my search is stopped because I also wanted to upgrade my alto lxi steering wheel which is 2010 model but I have one question.?
my question is it possible to upgrade with zxi model ( steering mounted audio control ) because my first choice is zxi model.
Glad the video was helpful. Regarding your question, such an upgrade has multiple challenges and would be a big ordeal.
1. ZXi steering wheel has a different frame that won't take an ordinary horn pad.
2. Audio controls require a clock spring for electrical continuity. Adding that to Alto would mean hardcore modification. To allow for the clock spring, guessing the combination switch must also change.
Refer this thread about adding audio controls in Ertiga bit.ly/3jcgLHA.
thanks alot for this link really helpful for me and I want to upgrade my combination swtch because of fog lamp switch is not available in this switch like k 10
@@Mr.N.143 did u modified
@@yuva9323 not yet but i plan to modify it
Great job bro 👌👏
Thank you so much bro😀
*bhai jo abhi swift hai top model jiska steering toda sa teda sa hai vo lg jayega es gadi me alto. Me plz reply*
Hi Sonu. Abhi wali swift ka steering wheel alto mein fit nahi hoga. Kyunki column shaft ki mounting spline alag hai.
@@Autophile *bhai aisa he kch design ka or mil jayega esi trh ka aise wala plz reply*
Nahi bhai Alto ke liye compatible aisa flat-bottom design wala koi steering nahi hai.
@@sonuthakur7097 momo ka flat steering wheel laga lo
Maruti 800 main multimedia steering lgany ki video bnana plz
Brooo......i have a doubt.....is it possible to replace ritz steering wheel with top model swift steering wheel ? Because i like the flat bottom steering wheel and i need the audio controls too...pls help me out...if it os possible, then can i do it myself..?
HI Subhash. This is a wish of many including myself. Unfortunately, the flat bottom wheel has different mounting spline. Still wouldn't say swap is not possible. Check out these nicely done examples bit.ly/37kjNXa, bit.ly/38whqRU. To install, guess you'll need to replace steering rod and also consider other parts (contact coil, combination switch, airbag module etc.)
@@Autophile thank you....
Is me swift ka multimedia steering kaise install hoga with working multimedia plz guide me
Hi Waqas. Multimedia steering fit nahi ho payega. Kyunki uske liye combination switch alag hota hai aur contact coil (clock spring) bhi chahiye.
Third generation Swift vala steering wheel install karke video banao... Killer lagegi💥
Hi Deval. Mera mann toh usika hi ta. Lekin uska mounting spline alag hai. Isliye Alto mein fit nahi hoga.
Sir swift 2010 model steering 2020 swift ka install ho sakta hai
Hi buddy. Actually nahi. Woh steering install nahi ho payega kyunki old aur new swift ke column mounting spline mein farak hai.
Bhai pionner stereo ko w/r se steering mounted buttons (volume up down, songs next and previous) buttons ka DIY video banao plz...
Very neat ❤
Can I use Celerio 2017 top model zxi steering on 2006 Swift vxi ?
Hi Joy. The steering should fit normally as the mounting spline is same. Additionally, the contact coil (clockspring) has to be upgraded. And for this compatibility needs to be checked and verified. Fyr check this out ua-cam.com/video/1VN45DfVyB0/v-deo.html. Seems to be expert in steering upgrade. Contact them for support if possible.
@@Autophile well that was super awesome 👍🏼much appreciated, but I think that dude upgraded the 2020 steering with Airbags but mine is non-Airbag model which would be useless. Rather buy a steering with controls that offers just plain plastic horn pad without the airbag built-in
Very informative
Really great videos explained everything in details
I'm planning to change my alto 2008 steering into Swift dizre D cut steering wheel basic one without any control on it
I've a doubt whether it will fit or not ?
Pls replay whether it ll fit ? Will I face any issues ?
Hi RVKRN. Thanks for tuning in✌. Am really glad you find the videos helpful😀.
About the Swift's d-cut steering wheel, unfortunately it can't be installed in Alto. Basically, it won't fit on the steering column because the mounting spline is different.
@@Autophile thank you for your information
I had a Maruti CIAZ and SWIFT earlier and currently I own a S-Presso. All these cars exhibit a common steering issue. After taking a turn to the left or right, the steering wheel does not return to the original position and each time I have to retract it myself to get the steering back to the original position. I also have a Vento where this issue never happens, after taking a turn the steering wheel returns to the original position perfectly. I have had multiple visits to both several authorised as well as outside service centres and nobody has a solution for rectifying this issue. Can this be addressed in any way, at all?!
Btw, the S-Presso is a 2021 AMT VXi Plus top-end Model
Agar alto LX 2008 mein LXI wala power steering lagvana ho toh kya process hai.
3 parts required for EPS. Not sure about exact part code. Approx. price in new condition.
1. EPS Steering Column Assy. ~Rs.25k
2. EPS Controller ~Rs.8k
3. Wiring Harness ~Rs.4k
Have it installed at Maruti service centre or local garage.
Very nice info.. 👍👍
Hi , bro good job 👏 👍
Hi. Thanks 😀, that's very nice of you. Glad the video's helpful👍
Please one video for how to install top model steering wheel (with multimedia controls please) please please please 😢
Great information 👍🔥
Glad its helpful. Cheers👍
great... go ahead eagerly waiting for other modifications..
Please make video on roof cleaning diy ❤️❤️
Can we install wagonr steering in alto 2007????
Hi Abuzar. Steering from previous 1&2 gen Wagonr can be installed. In current 3rd gen model, the steering has different mounting spline. So it will not fit in Alto.
@@Autophile Shukriya sir jaankari dene ke lye!!
Can we use alto k10 without airbeg last jenretion steering wheel also..?
Plse rply..
Guess you mean to ask for Alto. Yes, Alto K10 2nd gen non-airbag steering wheel will be compatible.
@@Autophile yes for alto lxi 2008.. plse can u tell abt part no. Of this one..?
Steering Wheel 48110M59K00-P4Z
Horn Pad 48120M67P10-BDB
Thanku 👍
Alto K10 2018 me change
Please install rear adjustable headrest in alto
Can I install dzire 2nd gen steering in Alto LXI (2006) model
Hi Mohammed. Yes, absolutely you can install Dzire 2G steering in Alto. Just be careful to get the non-airbag type.
MGP genuine part nos.
1. Steering wheel 48110M74L01-5PK
2. Horn pad 48120M74L00-C48
@@Autophile shall I go to machanic to change or can I do it myself?
Actually it's quite simple to do by self. First disconnect the battery negative. Pull out the horn pad by hand. Now if you don't have socket and wrench, then remove the horn bracket (3 screws) to gain access to the center nut and remove it using 17mm spanner. Take off the steering and install the new one.
@@Autophile thankyou ❤️
Put the Alto car power window installation video
Bro can we fit 2021 model Swift Steering wheel in The latest model Alto 800 ?
Hello Vandalizer. New gen maruti cars on heartect platform, such as Swift, use a 33-teeth spline to mount the steering wheel. While conventional models, including latest Alto 800, continue with 30-teeth spline. So unfortunately a direct steering wheel swap is not possible.
@@Autophile Then How can that swap be possible? Can I change the teeth spline setup?
The steering column shaft must be swapped as well, if feasible. Moreover compatibility has to be checked for related parts (combination switch, airbag, contact coil) and customize as required. Here's a reference video bit.ly/3MfpVjy
@@Autophile So it's practical and possible by changing the shafts right?
Would be an experiment and if successful, an example for others 👍
Best video
Bro, can I fit ignis steering wheel on my Alto K10 2017?
Hello AVS. Thanks for tuning in😃.
The Ignis steering wheel is not directly compatible to Alto K10, primarily since the mounting spline is not common. To make it possible, one must first change the column shaft rod, for which professional help would be required.
FYR check out this channel bit.ly/3pDNDMv. Has multiple vids on steering swaps. Contact them for support if possible.
Also check out this video bit.ly/3ci9lT2. Hope it is of some help 👍
@@Autophile Hey Thanks a lot. I just finished watching the video and it's quite risky to do that as said by the guy. So I guess it is better to go with the old swift 2nd gen steering wheel.
Yeah that'd be a good upgrade and pretty straightforward too.
@@Autophile yeah thanks for making these kind of videos. I'd like to know if the front seats of S-Presso would fit in Alto K10?
Is it possible to upgrade wagon r 1st gen steering lever with new gen
Hi buddy. Sadly its not possible. Since the mounting spline has changed (supposedly owing to heartect platform), the new gen model steering wheels are incompatible for previous gen cars.
But can I do the steering upgrade of my gen 1 wagon r
Check out this video though bit.ly/3BPiQ4h.
New Swift steering custom installed in Wagonr 2nd gen.
Guessing that the steering column spline shaft is replaced too.
Yes you can install new steering which is directly compatible.
Bro 2006 model alto lx suitable steering wheel
Any steering wheel (non-airbag) from all models shown in video is suitable. Here are some of best picks ua-cam.com/video/ntvq3ZX9tCM/v-deo.html
I hate tata Indica steering wheel, it's not comfortable position holding, please suggest me any other model vehicle steering wheel for tata indica v2 please
Hi Shridatt. Thanks for tuning in😀👍
It's a bummer that your stock steering wheel isn't comfortable. Is it the four-spoke type or which one? To upgrade the steering, there goes two options: 1. swap the wheel with other tata model or 2. retrofit a new car wheel from other brand. Could not say much about other tata models with almost no knowledge. For other brand, I tried to compare with maruti steering from product pictures on boodmo website. Maruti steering for previous gen models (Alto, wagonr, swift, ciaz etc.) has a 30-teeth spline for column mounting and it appears like it's the same for tata indica v2. Back then maruti and tata might be using common design. In order to find out what steering can fit, you could get in touch with a local mechanic and try out other car wheels. Let's see how it goes and any further help needed, do let me know. ✌️
Bro maruti zen or new swift ka stering wheel panal same nahi han.
Mane apni zen me swift wala stering lgana chaha but nahi lag paya 😔
Hi Gagan. Purane sabhi models mein steering wheel mount standard hai. Magar naye models jinme airbag mandatory ho chuka, unme spline design badal gaya hai. Isliye new swift ka steering, kisi bhi pre-airbag gaadi ke saath compatible nahi hoga.
I want to see modifications about folding orvm with light indicator complete DIY
Hi Aadi. That's dream of us Alto lovers. Wish it was possible though. There is no direct fitting orvm or conversion kit. Yet to find a practical and VFM solution.
But there are led covers available for alto
Will 3rd gen swift steering wheel fit alto ?
Hi Vetrivel. Unfortunately it will not. Mounting spline is different.
@@Autophile ok Bro then what about old baleno steering wheel will it fit
Yes it will fit. However, might need to customize the column cover trims.
WHEEL AUR JO NICHE BASE H USME RAGAD LG RHI H USKA KYA SALUTION KRE
spacer waser lga k kam chl skta h kya
Hi Rahul. As per Insta DMs, I understand that your car is Alto 2012 and you have installed new gen Alto steering. While steering swap we may have to do some customization as I had done with column cover. In your case, new steering is mounted deeper and rubbing with column cover. To solve your issue, may I suggest to try & replace the column cover trims as well with this 48400M79G00-P4Z. Probably this cover would be shorter. Just a guess.
mehnat dikhti hai tumhari
Thanks for support, Tejas bhai🙏
It can be fitted in maruthi 800
Hi Sumanth. Thanks for tuning in✌
Yes, these kind of steering wheels can be fitted in 800 very much directly 😀. However, as explained in the video, the indicator auto-cancel function would not get activated because the wheel hub is flat (does not have the two pins as in 800's original wheel). Probably, you could do try some jugaad to make it work👍
Superb
Thank you! Cheers!
Mere pass 2007 h usmai ho skta h
Hi Akash. Thanks for tuning in ✌
Yes absolutely! This installation is possible in 2007 Maruti Suzuki Alto. Hope this helps. Drive safe 😀👍
Please do more videos in alto
Hi Pravin. Surely vids will keep on coming✌
Nice ❤️❤️❤️
Hi buddy. Glad you liked it😀. Thanks for tuning in👍
One should never fiddle with vital parts of the vehicle in the name of upgrade/modification. It may cost you and your dear ones lives.
Certainly, thanks for emphasizing that. The choice, though, is up to one's own discretion.
@@Autophile But majority of enthusiastic get motivations from such DIY clips.
No ritz steering astar steering 😂😂 you noob
Sir hum kisi bhi car ka steering change kar sakte he
Hello @pushpakgf. Thanks for tuning in👍.
Helloo sir please give me your Instagram id
And make a video on change gear leaver to new swift
I’m waiting for you reply,,,,,,,,,
💞💞🔥🔥🔥🔥
Hi Kuldeep. Insta id is @autophileyt.
Airbag works...????? Tell me
No it will not
mere pas maruti A star hai 2010 model kya usme ye swift ka steering wheel lg skta hai kya jo apki video k thumbnail me hai no 4 pe dikh rha hai plz bataye wo steering konsi model ki swift ka mtlab kis gen ka
Hi Sahil. Thanks for tuning in ✌
Yes, that steering wheel which is from Swift 2nd gen can be fitted in Astar 2010 model. Refer these MGP part numbers and boodmo buy links
Steering wheel : 48110M74LL1-GJL, bit.ly/30mcx9N
Horn pad : 48120M74L00-C48, bit.ly/3AHDiSN
@@Autophile thanx bro but boodmo pe not comptable with your car likh k kyu aata hai?
Actually boodmo jo hai woh OEM ke model parts catalog ke basis par bta raha hai. Yeh steering jo swift ka hai woh astar ke catalog mein nahi rehta, magar install karna possible hai. Jaisa maine video mein btaya ki steering mount spline sabhi purane models mein common hai.
@@Autophile ab smjha bro thank u 😊😊😊👍👍 or nuts to nahi chaiye hoge isko lagne k liye kuch alag
Very nice info.. 👍👍