How to use the stampers foam in your Tim Holtz platform for perfect results every time
Вставка
- Опубліковано 11 вер 2024
- A great tip to use foam or your stampers secret weapon in your Tonic Tim Holtz Stamp Platform, supply list below :-) Enjoy!
--- S U P P L I E S ---
• Tonic Studios - Tim Holtz - Stamp Platform
--- ldli.co/e/61nyd [ ScrapBook.com ]
--- ldli.co/e/gxnzy [ SimonSaysStamp ]
• Foam Sheet 9"X12" 2mm-Black 10 per pack
--- ldli.co/e/03045 [ Amazon US ]
• Honey Bee ZEN OCEAN Clear Stamp Set HBST66
--- ldli.co/e/4loyn [ SimonSaysStamp ]
• My Favorite Things BLACK LICORICE Hybrid Ink Pad MFT
--- ldli.co/e/25g3x [ SimonSaysStamp ]
• Neenah Classic Crest 80 LB REAM Smooth Solar White Paper Pack 250 Sheets
--- ldli.co/e/5xp40 [ SimonSaysStamp ]
• Neenah Classic Crest 80 LB SMOOTH SOLAR WHITE Paper Pack 40 Sheets NH80LB40
--- ldli.co/e/3543d [ SimonSaysStamp ]
• Ranger Ink - Inkssentials - Reusable Non Stick Craft Sheet - 15 inch by 18 inch
--- ldli.co/e/m7g3o [ ScrapBook.com ]
--- ldli.co/e/emne5 [ SimonSaysStamp ]
I refused to buy the Misti because of the price. I bought the stamp platform instead and love it. I've never needed to use foam but see how it can be helpful with intricate stamps. Great tip.
Thanks for this quick how to. I had watched videos in the past, but one crucial step was missing and that was to turn the platform to the Rubber side. I tested it and now finally my stamps are crisp, after 1 stamping, 2 at the most. Thanks so much. I was regretting my purchase, but now I am really happy.
I got my THSP a few months ago and I'm really loving it. I haven't needed any extras so far but these tips you shared are great! Especially the duct tape and magnets since mine seem to be in love with each other!
Lol, too funny 😂
Thank you for this tip. I had tried adding foam but didn't turn the lid from clear to other side, nor did I use the TH stamp mat. I have now adjusted my attempt and have flipped the lid as shown, used foam with sticky back and have adhered an inexpensive teflon oven mat ( instead of the TH mat) to it. Now there is no slipping and sliding! Works great!
Thank you so much for this tip. I was ready to get rid of my TH platform. Great idea!!!
Thanks so much - I'm having so much trouble with my 5 year old Tim Holtz platform. I can't get a good impression. Areas are skipped, even though I'm thoroughly inked the stamp. I think this just might solve my problem. Last night I went back to the old fashioned Fisker stamp press with the 4 foam feet to finally get a good impression. You just have to stamp it perfectly the first time - no second stamps with the simple little system. However, it did the trick when I couldn't get good results from either my Misti or Tim Holtz platforms. And I think I'll change the foam in my Misti, too. Maybe I've used it so much, it's lost its oomph! Thanks again.
I’ve always loved the idea of customizing tools.. The tools don’t need it to work but it sure is nice on my arthritic hands and every advantage lets me stamp longer. As a legally blind stamper certain colored backgrounds make it easier for me to see paper for alignment. Now I can swap out the foam to higher contrast against my colored papers TFS. I’ve subbed and look forward to catching up on your past videos. 🌼
Great idea. You could stick the foam down with a sticky grid. I will definitely try this.
I tried the foam trick with my clear stamps but it won't pick them up. Looks like I need thicker foam. I'm using the rubber stamp side with the 2mm foam. Sometimes I need foam with the clear stamp side as some of my stamps seem exceptionally thin. However, I do wonder if the stamping platform is slightly misaligned as it doesn't quite close.
Neither the Misti nor the TH platform promises to make a perfect impression every time. Their purpose is to be able to stamp in the same exact place until you are happy with your results. Also like TH showed in one of the videos you can add more ink to certain areas looking like shading. The reason for the foam in either one is whether you use a platform or not your image always comes out better if using store bought precise stamp foam or fun foam which is exactly why the Misti included it with their machine. Also if you ask me the manufacturer of the Misti was just scared because if TH product hit the market even though it was different in a coupe ways like not having to cut your paper down to fit, and allowing more crafters the opportunity to purchase a nice platform without charging 60.00 and 100.00. They were afraid some people might buy the TH one and that would mean a loss in enormous profit each time someone bought a T H one. They were just selfish and wanted to monopolize the market with their enormous prices. They weren't too worried about the other ones on the market until the TH one came around.
Thank you for sharing it looks great with the foam addition.
Hi there i have just tried my platform for the first time it missed bits off all my stamps. i found your channel and the foam helped lots as it didnt come with the foam i used the padded packing that came with the platform this did the trick thanks for your help
Thank you for the video, I just got my TH platform and look forward to a day with happy stamping! And I will certainly try your foam tip for the clear stamps! Your videos are so nice and cheerful, so glad to have found you on UA-cam ( and also happy to have found another hedgehog fan, that sweet little animal is the totem for my husband and me;-)!)
Thanks so much, welcome to the Hollow!
Thank you very much for your tutorial today.
You're so welcome
Marvelous tip! Thanks for sharing!
I noticed that I have a "dead spot" in my THP that is particularly noticeable if I am using a large stamp. I found if I take a strip of cardstock about 1.5" wide by 6 -8" long, I can slide the strip under the edge of my paper so it is under the "dead" spot where the impression is light. I can usually re-press without reinking and it fixes it. This "raises up" a part of the paper to make better contact. I even have used a "chuckie" tool to press all over. I think my cover is slightly warped. I live with it because I don't want to spend money for a Misti. Every tool that comes to market eventually gets improved upon by someone else. Its hard to justify repurchasing supplies I already have. Do you find that your magnets work through the foam and the teflon sheet? I do notice that it is harder to place the paper in the corner due to the thickness of the foam.
Wonderful idea with the cardstock shim. I too have certain stamps (the Visible image hummingbird for example) which wouldn't stamp clearly. I've also ordered 2mm foam. I've had my Tonic platform for more than 4 years. Couldn't imagine stamping without it.
Thank you so much 😊 that’s so helpful and useful.
Thanks for this. I just got my Tim holtz platform and was like geez this is a piece of shit. The photopolymer stamps don’t completely touch the paper. Complete disappointment.
Thanks for sharing your tips. I don't make a lot of cards but the tips are great for making other projects too!
Absolutely, whatever your project you can use these tips
Hello!! My Tim Holtz Stamping Platform just shipped and is on the way!!! I'm planning to get a piece of foam for my platform and I was wondering if I would need to use the rubber side...now I know!!! Thank you so much!!! 🦋
Whoop whoop, you will love it!
Do the magnets still work with the foam in place
I am enjoying your video's. I am only been following you about a week or so but I learned and enjoyed your video's ! Thanks :)
Thanks so much and welcome!
I love the magnets! :) A great tip!
Thanks so much for stopping by
Thank you. My platform arrives today! I had no idea about the lawsuits. Interesting. I LOVE your tips.
Awesome, you will love it
So glad this is finally released! Can't wait to get one for the holidays! Glad I never succumbed to the over-priced misti.
Yes its amazing!
I will certainly try the foam idea thank you
you're so welcome
It’s a great idea for very intricate stamps, just saves keeping Re inking or turning the lid i guess, and keeps the platform clean! I haven’t seen the stamp shammy before, apart from on videos, I’m in the Uk any idea where I could get one? I’ve just subbed to you, so off to watch some more x Ann x
How thick is the foam? Definitely going to try it. Thanks for sharing🙂
2mm foam is perfect
Not sure why this video turned in a war between different stamp platform users....
Hi there...Pls tell us what size sheet & thickness of foam you use. Is it called Fun Foam?. Also did you have to cut foam to certain size? What to what in size? Thanks-I'm new to this. Appreciate the help.
It is all in the SB linked video but I cut it to 8.5 square; its 2mm which is linked under the video too :-)
oh...I'm so sorry :( Thanks so much! Can't wait to do this...I have two of TH's platforms. Fun!
Do you think we could use this to stamp into a book or journal, or would that be too thick and break the hinges?
I dont think that would work you would need to use acrylic blocks
May I ask, what type of foam is this? Is it similar to the fun foam you can buy at craft stores for kids projects?? Thanks for these videos I am learning so much! I just got the We R Memory Keepers stamp press, but your videos make me want this one!!
Yes exactly, I linked it below the video, I buy packs of ten and use it on my card to raise up whole panels, much cheaper than foam tape for large areas and sturdy in the mail
Thanks!!
Susan Humphreys has
Susan Humphreys I started with the WRMK press and switched to the Tim holtz sry I didn't do it sooner.
I actually have been very frustrated on the quality of my stamping with the THSP. I own a mini misti but don’t want to make the investment of the larger one as this is a hobby for me and not a business. I will try the foam for sure and see if that helps. Thank you so much! 💁❤️
Hi Terri, Can you let me know your frustrations and we will try to help x
Hedgehog Hollow thank you! Well I just have a difficult time getting a good print. I’ve actually just re-watched your video on priming your stamps, so I will try that today and maybe see if it helps as well. I may go out today and get the Stampers Secret also. I love my platform so it may be “operator error” so will try your helpful hints and then get back to you. 🤦♀️. Thank you again! Talk to you soon with hopefully, good news!! 🤗💞
No problem, we are here to help. I think the foam would make a big difference for you
Hedgehog Hollow I really appreciate that! Thank you !!!
Hedgehog Hollow I did get the Stampers Secret but it was too thick, so I peeled the foam off and found its still a bit too thick, so...... I’ve ordered foam from Amazon. Hoping that helps! Ha! Such a dilemma! 🙈😊
Thank you! I am having a problem with mine not stamping the whole image so i am going to try this! I am assuming that you remove the foam when you stamp with rubber stamps - is that correct? Love your videos and tips. Thank you for sharing with all of us
Yes exactly! Thanks for stopping by
I also had a problem with my thin clear stamps... End result not the whole image stamped
What is stamper foam please
Where did you get your Zen Ocean Poly Stamp? Where's the best place to buy the Tim Holtz platform? Happy Crafting!
It's all linked under the video for you, I would buy from Simon Says Stamp (Tim447 for 10% off) or scrapbook.com check our exclusive links below the video
I can't get a good impression of Tim Holtz Glorious Gatherings stamps for anything. They are rubber stamps so I don't know how this technique would work for them. The Glorious Gathering stamps have much finer detail than the one you are showing. Help!
Hi Susan, the glorious gatherings stamp is designed to be used in part rather than as a whole I used it in the alcohol lift ink video but it does work best with the block rather than the platform, is there a particular part of the stamp that is causing you an issue?
Different parts at different tries. I pressed down really hard I thought. I've tried it on the block and the platform. It was expensive enough too.
Alexandra thank you for another video on this stamp platform. I was curious do you think if I say sticky taped two pieces of wax paper, I could create a stamp mat to put over the foam? I try to come up with ideas for somethings that I can make at home instead of purchasing. I really enjoy your videos Alexandra and I appreciate the fact that I can look forward to a video that has great tips, demonstrations etc from you. Thank you so much for sharing your creativity and talents.
Be careful with wax paper and heat, it will melt onto your platform, wax paper will not behave the same as a teflon mat, for something that isn't heat resistant I would try a laminated piece of plain or grid paper
Thank you for the info, Alexandra. I think your idea for a laminated grid etc. are right on. I was just thinking that I could put a piece of wax paper over the piece of foam when I was stamping only. I think you're right. I need to purchase something that will have multiple uses. Thank you so much for taking the time to graciously answer my questions. I really appreciate you. Thank you so much.
the foam sheets literally cost a dollar or less, Kathleen.
I am having trouvble with my stamps not clinging. 9have cleaned them) was thinking of adding some stix2 non slip grip film to the lid. Woulld be rateful for any advice.from anyone. Thank you. Trish x
Hi Trish, I wouldn't add anything to your lid, typically cleaning the lid with isoproyl alcohol will remove anything there and we do have a video on the channel on stamp cleaning and some tips if your stamps arent sticking, if you are still having issues email support@thehedgehoghollow.com and we can try to help further
Hedgehog Hollow thank you.. I'll check that out x
cairdeas4 d
Cool, I got my one today
I know you will love it, check out the videos linked along the way for some top tips too :-)
Hedgehog Hollow I ordert the misti edges today
Awesome
This seems wrong to have to add foam and craft sheet to a product that is supposed to work without it? It makes me wonder what was wrong with just using our acrylic blocks to stamp with?
As I mentioned at the beginning of the video the press works fine without foam, however, some people prefer it, similar to the Misti; if the tis your personal preference I have a few tips on being successful adding it, its not a necessity but a preference
Deborah A
Please can you tell me how I attach unmounted rubber stamps to my stamping platform, should I use something like 'Stamp Eze'? I have tried just using a little glue stick but this isn't very successful. thank you for your videos I love to watch them as I am still learning and find them so useful.
Hi Barbara, you will need some ezmount foam, amzn.to/2M1lNUh you can trim around the stamp and foam and them use the rubber side of the platform, you will get a nice image and the stamp is reusable again and again
Thank you so much for your prompt helpful reply, I will give this a try. I am not sure though will I still require the extra foam underneath?
The magnet holds through the added foam and mat?
Yes absolutely
If the TH platform works fine without the foam , why have a preference to use it?
Rather than bringing it over twice I find detailed impressions get done first time, as always tools are all about personal preference
Thank you
Just got a ca!l from little mom & lol brick and mortar store that my platform is in. I'll get it next week. I see the foam linked but I don't know about the Teflon craft mat. Can you provide a link to ig? Thank you. Love your videos. YOU are so much fun!
That's linked to 'ranger craft mat' --- ldli.co/e/m7g3o [ ScrapBook.com ]
--- ldli.co/e/emne5 [ SimonSaysStamp ]
The teflon craft mat can be found at a fraction of the price in the baking section at some box stores... in Canada it's Canadian Tire. It's the same thing and twice the size which makes it easy to cut smaller pieces for crafting!
I use these too but some are not water proof and the ranger one does have a special coating for certain ink techniques :-)
Thank you. I didn't know this. I will have to check it out.
How thick is the foam?
Mine is 2mm
where do you get the teflon sheet??
• Ranger Ink - Inkssentials - Reusable Non Stick Craft Sheet - 15 inch by 18 inch
--- ldli.co/e/m7g3o [ ScrapBook.com ]
Thank you so much.
I’m not happy with it for this reason.
I have to have the foam or it doesn’t work right.
So many extraneous comments that it is very hard to follow what your goal is. What are you trying to do? The best broadcasters find that using fewer words add clarity, not less.
I thought the whole idea of the THSP was that it would give perfect results all the time without doing anything more to it! No criticism of Hedgehog Hollow implied but if the tool needs that intervention I'd not be happy with it.
I agree. Might as well stick with the MISTI...
It doesnt need that intervention at all. However, some peeps do not like stamping on a hard surface and, therefore, prefer something softer. Also there is less changing of the lid for different stamp thicknesses. By all means stick with your Misi, perfect results will always be achieved using the THSP with or without the foam. It is just a preference. :)
I own a MISTI and it works perfectly fine, so don't see a reason to buy a new one just because it is from Tim Holtz ;) And besides, I like having the grid and the foam :)
Absolutely, I prefaced this in the video that it is personal preference and I wanted to show you how to use the foam if that is what you like, I mix it up and yes it is convenient no changing around too
If you have a misti I understand, I have 4! However for a new purchase Id o think the THSP is much better value, the foam is personal preference and the grid is also so easy to get with some math paper or laminate a piece of SU or SSS work paper
Absolutely no need to add anything, it works perfectly without.
As I said in the intro its personal preference whether you add it or not, but if you do then I found some things worked and some didn't!
Please get rid of the screen typing it is messing up the lesson. Thanks
Gloria Bennett I can't see what typing you mean. Is it subtitles? If so you need to turn off closed caption at your end
I think i missed the part that you used the RUBBER side of the stamp platform. I will try that later today and hope this works. You will be the first to know...lol
The closed caption? I didn't do that but you are probably right. So, thank you for your continuing support. Love your clear and no wasted time videos.
How thick is the foam?
Its 2mm
Thanks - I need the foam!