hello I just saw your video of the operation of the paddle shifter PCS I bought the same one but I have a problem with the electrical connection can you help me thank you
That looks like the zero gravity paddle shift kit. Have you looked into leveraging the TUTD pinout on the T87 transmission controller? From what I have seen it's a a few resistors in line and then buttons to indicate up/down. I would think in line wiring would be better than bluetooth to a can bus module.
What are the dimensions Mitch? Width mainly but also the thickness please. Can it be used with the Digital Dakota RTX gauge info center and remove the red LED box on the paddle shifter frame?
Do you have any problems with it losing "connection" not allowing you to shift? I have one and sometimes it will lose itself and I will be stuck in a gear. Or I will be driving and it will be in 5th and all of a sudden the display goes blank and then pops back on
Had alot of issues with this system, constantly getting stuck in a gear. Display would say wifi error. Took it out because it got so bad. Waiting for another company to make it.
Need one for my C10 LT4 with 10L90 swap. Keeping it a column shifter so this would be awesome. Does it work with 10 speed? Everywhere I read about these only says 4 5 & 6 speed.
4l80e will require an aftermarket transmission controller. Pretty sure this paddle shifter assembly comes from powertrain control solutions which should sell the controller included in a kit... for an extra fee of course. If not they have it somewhere on their site anyway. 6l80 and 8l90 have computers built in. If anyone has more info I could benefit as well
Watching my own video before I install another one of these on my other truck! 3 years goes by quick
Are u stilling the paddles shift kit
This is incredible!
PCS is a high quality product and I'd recommend it to anyone doing a swap!
hi mate, did you programme the 6L80E TCM for this..Thanks
Looks great! Looks like Powertrain Control Solutions paddlers 🤔
AWESOME good work i was talking about this in my recent video where i removed a 6L90 transmission from an express van.
Have the same transmission and pcs system constantly wouldnt shift with this tansmission
You think this would be available on a 2014 Silverado? I use the +- buttons already so having paddles would be so much nicer
I put a L86 with a 8 speed in my jk would love that any way to convert that to a jk steering wheel ?
Nice to see finally,but compared to the zl1 10 speed,night and day Seems like alot of lag between shifts
hello I just saw your video of the operation of the paddle shifter PCS
I bought the same one but I have a problem with the electrical connection can you help me thank you
Will this work for a 2019 GMC Sierra Denali with a 10 speed transmission??
That looks like the zero gravity paddle shift kit. Have you looked into leveraging the TUTD pinout on the T87 transmission controller? From what I have seen it's a a few resistors in line and then buttons to indicate up/down. I would think in line wiring would be better than bluetooth to a can bus module.
Does it work without the need for a floor shifter?
Yes
What are the dimensions Mitch? Width mainly but also the thickness please. Can it be used with the Digital Dakota RTX gauge info center and remove the red LED box on the paddle shifter frame?
I installed this unit in my car, but I can’t find anybody to program my 6l80 to work with it. It won’t go into manual mode
Is it just me of does it seem it shifts very slowly? I have had a Porsche and an Audi with paddle shifters that was an instantaneous shift.
Ya I noticed that. My vw gti shifts instantly. But it has a dsg tranny with a clutch. Its reasonable that a slush box will have a delay.
6l80 are not DSG they shift slow that’s the way they are :(
I just got my paddles installed on my 10l90 but can’t get them to work what did you have to do in the tcm to get them to work ?
You cant have any codes in the tcm so make sure it is looking good dtc wise
will that work with the 8L90 using the T87A TCU
If youre ever in the mood to do an LTG harness I have one
I do the ltg as well. Email me at swaptimeusa@gmail.com
i dont see these on your web sight ? where do i get these paddles ?
Is this tci if so do u need the base trans controller
Will Work So Fluidly E36 L67 and THAT'S SPOT ON BULLSEYE
Do you have any problems with it losing "connection" not allowing you to shift? I have one and sometimes it will lose itself and I will be stuck in a gear. Or I will be driving and it will be in 5th and all of a sudden the display goes blank and then pops back on
Had alot of issues with this system, constantly getting stuck in a gear. Display would say wifi error. Took it out because it got so bad. Waiting for another company to make it.
@@jrmiller3368 wifi. connection? No thanks
What brand of paddles are those and what other parts did you use for the swap ?
Where did u get from
Need one for my C10 LT4 with 10L90 swap. Keeping it a column shifter so this would be awesome.
Does it work with 10 speed? Everywhere I read about these only says 4 5 & 6 speed.
Did you ever get paddles? I’m wanting to do the same, how are they working out?
can i order it still?
SNAPPING NECKS
Im interested
What about the 4l80E? What is the length paddle end to end?
4l80e will require an aftermarket transmission controller. Pretty sure this paddle shifter assembly comes from powertrain control solutions which should sell the controller included in a kit... for an extra fee of course. If not they have it somewhere on their site anyway. 6l80 and 8l90 have computers built in. If anyone has more info I could benefit as well
@@jeremym8748 I don't see anything for the 4l80 on their site.
What's your instagram?