How to Install: PumpSpy's Dual Pump Install Kit
Вставка
- Опубліковано 28 сер 2022
- Installing a second sump pump has never been easier. The PumpSpy Dual Pump Install Kit has everything you need to connect 2 sump pumps to a single discharge line. There’s no need to purchase PVC pipe, elbows, couplings and cement. No cutting or messy glue. Simply screw the check valves into both pumps, drop the Y-connector into the check valve boots, attach the rubber boot to the top of the Y-connector and then to your existing discharge line. Tighten all the stainless steel clamps with a screwdriver and you’re done. Install your pumps in a fraction of the time, since there’s no cutting or gluing required. PumpSpy’s Dual Pump Install Kit includes: Y-Connector, 2 1-1/2 in. Threaded Silent Check Valves, Stainless Steel Clamps and Buna-N Rubber Couplings. This kit is compatible with all pumps that have a standard 1-1/2 in. NPT pump discharge/output.
Where do you drill the weep hole to prevent air bounding?
Most likely there’s a weep hole already in the check valve. That’s how mine is.
It's like this guy never used a screwdriver before.
instead of hiring an actor to be your contractor, hire a contractor to be your actor.
;-)
I always use a nut driver for those anyway as the slotted screwdriver can be fiddly.