Hi, Im like you I'm on my 10th print then cut calibration working on this on and off for over 3 days, and nothing is working. Ive been in many communications with Loklik in the middle of them they issued V0010 firmware update. They have also advised me the Calibration values do not have to be at zero. They are now on Chinese New Year holidays until 17th so I doubt I wont get any more information from them until after that. I was hoping I would have updated information for my followers too regarding the Loklik but sadly no. At the moment the Loklik is just my vinyl cutter and my ScanNCut is used for everything else.
I understand & I do remember seeing about the new year as well. At first, I didn't think the values mattered either, but on my last calibration, the cuts oddly enough were precise on "0". This was only after I reset my calibration on calibration #9, when I realized how far the cut was from the values. Try doing a reset on calibration?
@@OttysCreations I’ve had mine at 0000 and it still didn’t work that’s when Loklik told me the values don’t have to be on zero to work I’ve given up for now until they come back to me
@applelover53 I hope it works out for you. I think you may be able to get a replacement. The first one I had wouldn't calibrate either nor cut properly. Best of luck ❤️
Unfortunately for my Loklik machine. I was never able to do the firmware update. It always shuts down and says update failed. I have tried several ways and it doesn't work. It is at an unusable point because without that update it won't let me calibrate the blades. And the reality of it all is that customer service is lousy. Buying Loklik for me was a mistake.
I get your frustrations. You may need a replacement. I think they are on holiday for the new year, but I've read many who couldn't update or power on got replacements. Definitely shoot them a message for one. Best of luck ❤️
Ive been trying to get mine calibrate all day.. its like acts like it's cutting but I cant see or feel any lines and no matter I do with the print then cat, it tells me that no layers are selected to cut, after I selected everything
shared to my group thanks
Thanks for sharing. Hope this helps 😊
Thank you for the help!!
You're welcome 😊
Hi, Im like you I'm on my 10th print then cut calibration working on this on and off for over 3 days, and nothing is working. Ive been in many communications with Loklik in the middle of them they issued V0010 firmware update.
They have also advised me the Calibration values do not have to be at zero.
They are now on Chinese New Year holidays until 17th so I doubt I wont get any more information from them until after that. I was hoping I would have updated information for my followers too regarding the Loklik but sadly no.
At the moment the Loklik is just my vinyl cutter and my ScanNCut is used for everything else.
I understand & I do remember seeing about the new year as well. At first, I didn't think the values mattered either, but on my last calibration, the cuts oddly enough were precise on "0". This was only after I reset my calibration on calibration #9, when I realized how far the cut was from the values. Try doing a reset on calibration?
@@OttysCreations I’ve had mine at 0000 and it still didn’t work that’s when Loklik told me the values don’t have to be on zero to work I’ve given up for now until they come back to me
@applelover53 I hope it works out for you. I think you may be able to get a replacement. The first one I had wouldn't calibrate either nor cut properly. Best of luck ❤️
Unfortunately for my Loklik machine. I was never able to do the firmware update. It always shuts down and says update failed. I have tried several ways and it doesn't work. It is at an unusable point because without that update it won't let me calibrate the blades. And the reality of it all is that customer service is lousy. Buying Loklik for me was a mistake.
I get your frustrations. You may need a replacement. I think they are on holiday for the new year, but I've read many who couldn't update or power on got replacements. Definitely shoot them a message for one. Best of luck ❤️
No consigo que corten las lineas. Pasa por ellas pero no las corta y tengo todo actualizado. Por qué puede ser?
Hola! Intente ajustar la presión de fuerza y vea si eso ayuda?
Ive been trying to get mine calibrate all day.. its like acts like it's cutting but I cant see or feel any lines and no matter I do with the print then cat, it tells me that no layers are selected to cut, after I selected everything
I had this happen once. It may be a faulty machine. Definitely reach out for a replacement if possible 💕
@OttysCreations I changed the blade and it actually worked. I'll see how it works cutting and print then cut