PD Movie Live air 3 - Not as EASY as you Think - Let me explain - LIDAR
Вставка
- Опубліковано 12 бер 2024
- I recently purchased the live air 3, I was super excited, and while it does work, well , it's not all it seems, and was more difficult to setup than thought! But it is a great start to something new!
#pdmovie #sony #fx30 - Навчання та стиль
Great video! Do you know how to reset the previously set lens calibration data?
Thanks for this amazing video 🙂
Thank you.
You're welcome!
Man i went through the same thing it was nightmare but when worked it was good also you can turn tbe speed down so it smooter and make less noise ....i was gonna do avideo but you done a good job
Actually I have a question for you!! Maybe im still doing it wrong, but once I programmed it in, when I turn it off, then on again, it seems to not be able to go back into my saved settings, I have to re-calibrate it all over again. *I thought this was meant to be easy!!!*
@@Sonymoviemasterswhen you turn it off then back on you just have to calibrate the hard stops, the distance calibration is saved. Hope that makes sense
Does it work on zoom lenses? I have a sigma 24-70
Yes, It works on any lens really, just can't use a mattbox as the laser needs to point at the subject , I actually use it to control my zoom on my sigma 18-35,
@@Sonymoviemasters Is the procedure on the 18-35 the same as explained in the video?
@@enzoscotti_ its the same for every lens!
Is that the last step to save the setting? Actually, you're pressing two times and holding, at the beginning you press three times and hold, just wondering to get it right. When you restart this thing to get it to work on the manual it says "automatically/manually calibrate the lens stroke to extract the AF data for the lens" What does that exactly mean....????"
Sorry, on the last step, im Pressing it 3 times, so, one, two, and then 3 (the 3 is the hold) I know its very confusing.
@@Sonymoviemasters So that "saves it" Once I calibrate, works fine, turn it off, restart... not working... 😠maybe I need this last "step". Did you ever have this problem?
@@tobiascrow2792 Ive been having the same problem, ive been having to re-do it eveytime I use the camera, the official instructions just say ". After the motor
restarts, simply set it to the corresponding color channel and automatically/manually calibrate the lens
stroke to extract the AF data for the lens. This will initiate the autofocus mode without the need for setup
again. Changing the camera will not affect the Af data of the lens." And I cant find a single video online which explains it. its frustrating as hell.
@@Sonymoviemasters So here's the thing... Once calibrated, if everything is working correctly, you turn off the camera and pull out the battery from the motor, then when you turn the camera on, pop back in the battery, you need to press the button once for about 3 seconds the button, it does its focus ring turning thing, then it works... that is what I figured out and finally works...
The official video by PD movie is a little messy, no mentioning about beeping, just lights flashing... let me try your way which is much easier
Yes I found the PD movie instructions very confusing.