Hey guys, hope you are doing great. Check out the Hidden features of Windows 10 in this video. Like 👍 and Subscribe 💖 to the Channel. ua-cam.com/video/yQwh5AvUbns/v-deo.html
Ehhh. As the comments say, if your issue is a BIOS setting, the beginning works, but the help sorta ends there. The reg backup recovery is probably sound advice (although mine is empty), but the rest of these are iffy at best. . Some of the commands you're showing here are straight up failing even in your own video. There's typos in the commands in the description. They don't work on any install (eg 9:40). Then on top of that you're running DISM with the /online option, meaning you're running it from a fully booted operating system. This is a very different situation than somebody with this "INACCESSIBLE_BOOT_DEVICE" BSOD error who is in WinPE recovery like you directed - and can't use that flag. In theory you should be able to just substitute /Image, sure, but it's situational and doesn't always work. A similar situation applies to your SFC command,, some of these operations only work in online mode, which anybody who is having this issue is not in. . At the end of the day this unfortunately reads like you copied/pasted this stuff from another source w/o actually understanding what is going on. Not trying to be a dick, but that's what it looks like based on the issues with the commands. It may give some people direction though on what they can look into further to try and diagnose this issue.
@@Vaynecenzo It depends entirely on what the problem is. If the problem is caused by a recent Windows update, then the DISM commands might go somewhere. If it's an important file issue the system file checker (SFC) might get somewhere. Both failed for me last time I had this issue, though. Neither helped. From there, if it's caused by a driver you installed you can uninstall it through safe mode. If it's not any of those (broken system file, botched update, or faulty driver), IMO it becomes infinitely harder, and then the best options are either try to restore from an image, and if that fails or you don't have a restore point, format time.
@@akashjosan8729 No idea, I couldn't fix it and ended up just formatting. Took way less time to format & reinstall Windows than I had already spent trying to fix it.
This was a GREAT tutorial! I tried all methods except 2-4 which was due to limited or non-applicable system results and thought that after running the "Check Disk" and still seeing the error. I would have to take it into a shop. However, I decided to try one random action and that was to go back into Advance Options, Startup Settings, and selected Safe Mode. My PC started to process the action. Then suddenly I heard the Windows chime!!! To my surprise my system did not boot into Safe Mode but actually opened Windows as normal. Man was I excited! So I am not sure if it was any of the processes that acted as the contributing catalyst but apparently attempting to initiate Safe Mode allowed the system to boot into Windows normally. So for what its worth. Try going into Safe Mode first and again this was a great tutorial, thank you!
Thanks my man! Had exactly the same situation as yours and after booting with Safe Mode everything worked well. Thanks to the author of the video as well!
Wow, this video is really well done. It's easy to understand and even easier to follow. More importantly, it solved my boot problem with one of the command prompt options that I used. Thank you!
Tanks a lot for your video it helps a lot ! However on my case it is most for understanding the problem as for now : 1.Enabling AHCI mode didn’t work 2.Cleaned the hard drive still not working 3.In the advanced options, System restore didn’t work as well as System Image recovery, Startup repair 3.In Cmd Prompt, after typing c:\>dir, there was a $Windows.~BT file as well as a Window.old file (I suspect the problem comes from here) 4.Remove pending update : all command works until 4th command where I get: Error 50 DISM does not support servicing Windows PE with the /Online option so couldn’t finish 5 and 6th command. 5.On SFC scan this message popped after I type the command ‘Windows resources could not perform the requested operation (same as you so still restarted the pc but still not working) 6.On DISM tool also not working. 7.On Check Disk tool, everything went smoothly. Got this message when it was done: Failed to transfer logged messages to the event log with status 50. At this point I’m not really sure what to do next expect from buying a new hardware. I would be eternally grateful if you know what is going on.
Sadly all the blue screens and another confliting windows 11 install corrupted my drive but atleast I figured it out and I backed up my data before the loss
Immense thanks for making this comprehensive video. I got it corrected with AHCI mode on my MSI GT62VR. Do not install the optional update from MicroStar International.
Yeeeeeeeeeeeeeeeeeey dam love this dude I thought my mom will kill me she never saw me using it for one day and started yelling me why I'm not using my PC lol 😆
This safe me a lot of confusion when I need to replace my motherboard with a newer one. AHCI mode you mentioned safe me an almost hasty decision to replace my boot SSD. Thanks a lot!
Thank you very much!!! You helped me salvage my grandma's old computer. Thank you very much she had legal files on there that would be a lot of trouble getting them back. Thank you again hope you are doing well!
Well, every operating system is for computers, and with such a complex thing issues are bound to happen. No operating system can be without issues that may need a slightly techy person to fix
I removed the case and cleaned up the driver and some dust I've found underneath and now it works like a charm! Thank you very much for the video, you saved me some $$$ and time!
Many thanks for making me look great, WindowsChimp. I just applied this fix to Latitude 7420 and it worked right away. Thanks (again)…new subscriber here.
Dusted my PC out and accidentally set to RAID configuration in BIOS when it suddenly popped up after being powered back on. Took me a few hours until I found this video. A quick BIOS search verified that AHCI Mode had not been set to enabled. Thanks!
0:54 Reason 7: Changing the AHCI setting in the BIOS. See article Advanced_Host_Controller_Interface on Wikipedia. In my case I had a new PC that booted Windows 10 and was working. After installing Linux, Fedora 35 refused to boot, the AHCI setting was set to Raid in the BIOS and Fedora couldnt handle that. 2:45 Thanks. Changed setting to AHCI, Fedora boots but now Windows has this issue.
Windows was able to finally recognize the new settings and it adapted to it. Now this new PC dual boots as expected. Thanks for all the help and info making this video!
Thanks so so much..your knowledge is brilliant 🎉🙏🏆 I had to change to AHCI mode. That's it. Blue screen fixed. 😱 By the way, I had to replace the power supply. Then I got this blue screen problem. I hope this comment will help other people too. 😬✌️
Hello sir, i resetted windows 10 after i got the error. But after it got resetted i still got the error but i can still open the advanced boot options. However. Since most of the videos i found related to this error is only for people who didn't reset their pc after they got the error. *How do i fix this error?* I tried doing what the other videos said and all of them didn't work. Please help me. Thanks.
What if I can't access advanced settings in bios? I've seen others use certain key combinations while in bios and then after rebooting into bios, the advanced menu tab appears. So far none have worked.
Thank you. My mother's PC had the issue and I believe that the BIOS had reset and changed from ACHI to some Intel SATA variant. The change solved everything..
Thank you very much, i just recently got the animators blue screen of death and it cost me my previous harddrive. I'm glad i didn't have to go through that again 🙏🏿
Thanks, I was having this problem while reinstalling Windows 10. Changing it from RAID to AHCI solved the problem. Before I had RAID and it was working. Anyway, I don't need it, so, AHCI is good too.
Guys!!! I waa facing this and had tried almost everything listed on different vids/forums and websites. In short, what fixed it for me is... 1) You should see the drive in the BIOS. 2) Turn the Re-size bar in the bios EZ menu ON. 3) Turn off the Intel Rapid Storage Technology 4) VDM is enabled but the other 2 options that are enabled get disabled automatically once u complete step 3. This loaded the OS after I was fed up with the inaccessible boot device BSOD.
Just say slash when talking about "forward" slashes. 12:19 You can't install any Windows program if you can't boot into Windows. Also, where are the bootrec commands for fixing the BCD ?
Omg!! You saved my data! Thank you so much! I was on a call with DELL for an HOUR and they could not help me, and your hack with switching to AHCI mode worked like a charm in under a minute!!! OMGGG!!! Thank you!!!
I have raid on for sata operation, when i hit AHCI, it propmts to a message that i might need to reinstall windows if I switch to it. So, I didn't do it.
I just built my pc and after restarting to enable some drivers it would constantly blue screen I’m so scared I cant even get into the troubleshooting section
Cool video however my problem is I used macarium reflect to clone the drive. When I installed the new drive in my laptop I get this stop code. So it has something to do with the cloning software or Windows knowing I cloned it and not letting me do that. I really don't know enough about Windows to know what's going on other than if I were to have done a Linux DD command with a Linux system this would have worked perfectly fine. I also did same exact thing using etcher Drive clone and I get the same inaccessible stop code. What do I need to do? You may not know?
New windows update was the culprit in my case. I have SSD and somehow the the update was showing in my HDD and windows tried to boot using HDD and failed n number of times.
@@WindowsChimp idk if your gonna read this but whenever i try to change SATA to AHCI it says it might prevent it from booting succesfully and could result in data loss, should just do it Also one more thing, i didnt find SATA MODE, the only SATA related thing i could find is SATA EMULATION, are they the same thing?
5:13 if im told "the system cannot find the drive specified" and I've tried all numbers from a to z, then what should I do? the device shows up in bios but not in cmd thanks
Hey guys, hope you are doing great. Check out the Hidden features of Windows 10 in this video. Like 👍 and Subscribe 💖 to the Channel.
ua-cam.com/video/yQwh5AvUbns/v-deo.html
My computer is many more times booting.but no response😢
Can you explain it?.please save me and my computer 😢
!.
..😅
Only video to mention cleaning the hard drive ports, thank you so much!
Thank you so much bro! I've been trying to fix the problem for 2 days straight until i found your turtorial. The sixth step worked for me!
Ehhh. As the comments say, if your issue is a BIOS setting, the beginning works, but the help sorta ends there. The reg backup recovery is probably sound advice (although mine is empty), but the rest of these are iffy at best.
.
Some of the commands you're showing here are straight up failing even in your own video. There's typos in the commands in the description. They don't work on any install (eg 9:40). Then on top of that you're running DISM with the /online option, meaning you're running it from a fully booted operating system. This is a very different situation than somebody with this "INACCESSIBLE_BOOT_DEVICE" BSOD error who is in WinPE recovery like you directed - and can't use that flag. In theory you should be able to just substitute /Image, sure, but it's situational and doesn't always work. A similar situation applies to your SFC command,, some of these operations only work in online mode, which anybody who is having this issue is not in.
.
At the end of the day this unfortunately reads like you copied/pasted this stuff from another source w/o actually understanding what is going on. Not trying to be a dick, but that's what it looks like based on the issues with the commands. It may give some people direction though on what they can look into further to try and diagnose this issue.
So is there any other fix if it's not the AHCI step?
@@Vaynecenzo It depends entirely on what the problem is. If the problem is caused by a recent Windows update, then the DISM commands might go somewhere. If it's an important file issue the system file checker (SFC) might get somewhere. Both failed for me last time I had this issue, though. Neither helped.
From there, if it's caused by a driver you installed you can uninstall it through safe mode. If it's not any of those (broken system file, botched update, or faulty driver), IMO it becomes infinitely harder, and then the best options are either try to restore from an image, and if that fails or you don't have a restore point, format time.
@@MrSlowestD16 same issue is with me. Now what should i do? Kindly help me
@@akashjosan8729 No idea, I couldn't fix it and ended up just formatting.
Took way less time to format & reinstall Windows than I had already spent trying to fix it.
i have this problem ,you mentioned the right thing about dism , anybody know how to fix via dism or sfc without online
3 years now and this video is still out there helping people. I was able to fix mine after turning on the AHCI mode.
I couldn’t find it in my bios
@@neonshiji3595 me either
Thanks alot you saved me a was thinking that i broke my pc after updating bios i cant thank you enough im subscribing and liking thanks
Thanks for the sub!
Which fix did you use for the bios problem?
This was a GREAT tutorial! I tried all methods except 2-4 which was due to limited or non-applicable system results and thought that after running the "Check Disk" and still seeing the error. I would have to take it into a shop. However, I decided to try one random action and that was to go back into Advance Options, Startup Settings, and selected Safe Mode. My PC started to process the action. Then suddenly I heard the Windows chime!!! To my surprise my system did not boot into Safe Mode but actually opened Windows as normal. Man was I excited! So I am not sure if it was any of the processes that acted as the contributing catalyst but apparently attempting to initiate Safe Mode allowed the system to boot into Windows normally. So for what its worth. Try going into Safe Mode first and again this was a great tutorial, thank you!
This solve took a couple of years off of me. Thank you soo much 🙏🙏
My god!!
It worked
I tried almost all the methods on UA-cam and finally gave safe mode a try and it worked.
Thanks a lot!
Thanks my man! Had exactly the same situation as yours and after booting with Safe Mode everything worked well. Thanks to the author of the video as well!
@@o.abrorkhon did u use USB or DVD with OS? Or tried all methods without anything?
@@oliverhaddo9198 nope, i tried without any USB or DVD
Wow, this video is really well done. It's easy to understand and even easier to follow. More importantly, it solved my boot problem with one of the command prompt options that I used. Thank you!
I replaced CMOS Battery for a new one and reseated Bios to Raid Mode, I changed it again to AHCI and problem resolved, thanks a lot 😃
That was it - thank you very much!
Hey mate, thank you! I forgot I could do that!
Thank you so much!!!!!!!! 🥳
*Step 1: Enable AHCI mode in BIOS*
Worked for me, I'm truly grateful
Tanks a lot for your video it helps a lot ! However on my case it is most for understanding the problem as for now :
1.Enabling AHCI mode didn’t work
2.Cleaned the hard drive still not working
3.In the advanced options, System restore didn’t work as well as System Image recovery, Startup repair
3.In Cmd Prompt, after typing c:\>dir, there was a $Windows.~BT file as well as a Window.old file (I suspect the problem comes from here)
4.Remove pending update : all command works until 4th command where I get: Error 50 DISM does not support servicing Windows PE with the /Online option so couldn’t finish 5 and 6th command.
5.On SFC scan this message popped after I type the command ‘Windows resources could not perform the requested operation (same as you so still restarted the pc but still not working)
6.On DISM tool also not working.
7.On Check Disk tool, everything went smoothly. Got this message when it was done: Failed to transfer logged messages to the event log with status 50.
At this point I’m not really sure what to do next expect from buying a new hardware.
I would be eternally grateful if you know what is going on.
Same problem here but its not my laptop so idk how it got to this
Same with my laptop 😓
Did you manage to resolve the issue? I got the same problem and cant figure out what it is
It was AHCI. Thanks for the hint. Saved me a lot of time and stress.
its also worked for me
Same I had to enable sata mode, the ports, ahci and disable vmd
Sadly all the blue screens and another confliting windows 11 install corrupted my drive but atleast I figured it out and I backed up my data before the loss
Damn worked for me too
Immense thanks for making this comprehensive video. I got it corrected with AHCI mode on my MSI GT62VR.
Do not install the optional update from MicroStar International.
Awesome :)
Not only from them
Evey optional drivers 🥴
Thanks a lot bro!!! You really saved my pc! This is the best video available on UA-cam for this problem! 🥰❤️
It worked! I enabled AHCI mode for my hard drive and I finally got in. Just hoping it doesn't fail again when I boot it next time
Same for me, this dude just saved my life today
Yeeeeeeeeeeeeeeeeeey dam love this dude I thought my mom will kill me she never saw me using it for one day and started yelling me why I'm not using my PC lol 😆
How to enable AHCI!
The drop down says AHCI
@@syedmustafa2363 you ever figure this out?
@@thenamelessranger7747 I had to take it to service centre! None of the methods helped.
This safe me a lot of confusion when I need to replace my motherboard with a newer one. AHCI mode you mentioned safe me an almost hasty decision to replace my boot SSD. Thanks a lot!
Same man, this tip is awesome 😎
Thank you very much!!! You helped me salvage my grandma's old computer. Thank you very much she had legal files on there that would be a lot of trouble getting them back. Thank you again hope you are doing well!
windows is so complicated
I haven't been able to use my computer for days windows sucks sometimes
Well, every operating system is for computers, and with such a complex thing issues are bound to happen. No operating system can be without issues that may need a slightly techy person to fix
atleast it's fixable most of the time unless Apple it always needs part replaced even the issues are not the hardware
ikr
Windows sucks
I removed the case and cleaned up the driver and some dust I've found underneath and now it works like a charm! Thank you very much for the video, you saved me some $$$ and time!
The ahci method worked even thow i have a legacy bios from 2012 thank u 😊 2:42
You earn a sub bro! Thank you so much for this I have tried for how many days to fix my pc but your video help me fix by changing only the ACHI ❤️
I use the same things it works thank you
Although I have Windows 10 PE, many of the checks were inaccessible to me; however, I learned a lot so it was worth the like and subscribe. Thanks!
You just saved me hours of redownloading and reconfiguring! Thanks a bunch!!
Too late for me ig I’ll never turn off my pc while it’s on again 🤣🤣🤣
@@That2007YZFR6THUNDERCAT can damage performance. Pc’s should always turned off after using UNLESS it’s a server.
Removing harddisk and cleaning its ports, really hepled to solve my problem. Thank You So much for making a legit video. You made my day❤
Thank you. In my PC it worked by changing AHCI in BIOS.
I was about to reinstall Windows when I saw this. I just needed to change my SATA Controller mode form RST to AHCI in BIOS. Thanks.
It work!!
holy shit it worked
it work, thank you so much
Worked for me to. Thanks for the tip.
Ty for this comment.
The best video on blue screen of death , changed to AHCI mode and problem solved instantly. thanks very much
Changing the SATA configuration fixed my blue screen problem. Thanks for the help
Thanks a million for all details. You saved my life
Many thanks for making me look great, WindowsChimp. I just applied this fix to Latitude 7420 and it worked right away. Thanks (again)…new subscriber here.
I am having same model today I was tired of that and after cleaning Ssd it is working but I stil doubt if it would still come back.
Thank you thank you!! You just saved me from buying a new computer!! I appreciate your work
Changing it to AHCI mode helped. Thank you very much!
Dusted my PC out and accidentally set to RAID configuration in BIOS when it suddenly popped up after being powered back on. Took me a few hours until I found this video. A quick BIOS search verified that AHCI Mode had not been set to enabled. Thanks!
After the BIOS update it gave me this problem...YOU SAVED MY LIFE BRO THANK YOU!! ❤😭
I was trying almost everything, except AHCI mode - end it works... Thanks for saving next dozen of hours :)
Acer Nitro 5 laptop here, changing the AHCI thing is what did the trick for me. Thank you.
Thanks 🙏🏾 ! Great tutorial 🎉🎉🎉
Was so worried,after changing to ahci mode the problem fixed !!! Thanks man 👍
The problem was solved successfully, thank you ❤❤❤🎉🎉🎉😊😊
It's worked for me,
Thanks a lot man❤
Awesome ❤️
You are the best 🎉🎉🎉🎉. You just saved me from going to change my system 😢
I got this after trying to update my laptop. I cannot get it to reset or anything….also won’t allow me to uninstall any recent updates I’ve made.
While watching your video i realise that reset the bios and forgot to choose intel rst instead of ahci .Now its working.🎉
i was facing the same issue. changing to AHCI actually worked.
you got my like and subscribe for that help.
God Bless you.
Thankyou
I LOOOOOVE U. u just saved my life and got a lifetime subscriper.
Thank you.
Creep
Thanks a lot 🙏 I almost lost my most important files , But with your help, the problem was solved.
Omg🥺 thank you! You save my laptop, after watching many videos on how can i fix my laptop, and i was able to fixed it after watching yours. God bless💙
Don’t know how to thank u brother it’s been 3 years no shop has helped no video other than this I are incredible
0:54 Reason 7: Changing the AHCI setting in the BIOS. See article Advanced_Host_Controller_Interface on Wikipedia. In my case I had a new PC that booted Windows 10 and was working. After installing Linux, Fedora 35 refused to boot, the AHCI setting was set to Raid in the BIOS and Fedora couldnt handle that. 2:45 Thanks. Changed setting to AHCI, Fedora boots but now Windows has this issue.
Windows was able to finally recognize the new settings and it adapted to it. Now this new PC dual boots as expected. Thanks for all the help and info making this video!
Thank you a lotttt!!!!! It's really working i don't know how to thank you really helped me! Thanks again.
Turning back to AHCI worked for me thanks 🙏🏽
I wasted all day trying to reboot my comp lol, the only problem was the ACHI.Good thing I found you
Thank you .
Brooo thank youuu sooo much you literally saved my life idk how to thank you but thanks a lot ❤😭
Thanks so so much..your knowledge is brilliant 🎉🙏🏆
I had to change to AHCI mode.
That's it.
Blue screen fixed. 😱
By the way, I had to replace the power supply. Then I got this blue screen problem. I hope this comment will help other people too. 😬✌️
System restore woked for me! Thank you very much!
This video was a lifesaver! Thank you!
the SATA method worked. should I leave it there indefinitely?
my computer doesn't go into auto repair mode after 3 fails of boot please help me bro
Did It Solve??
It's working and save me time and travel expenses .. Thank you so much
It says that I cant have acces to the files when I try to type the commandes such as C:\dism.exe /Image:c:\ /Cleanup-Image /RestoreHealth
Hello sir, i resetted windows 10 after i got the error. But after it got resetted i still got the error but i can still open the advanced boot options. However. Since most of the videos i found related to this error is only for people who didn't reset their pc after they got the error. *How do i fix this error?* I tried doing what the other videos said and all of them didn't work. Please help me. Thanks.
What if I can't access advanced settings in bios? I've seen others use certain key combinations while in bios and then after rebooting into bios, the advanced menu tab appears. So far none have worked.
I can’t get to it either
It's very good, helps a lot. Thanks brother..
Thank you. My mother's PC had the issue and I believe that the BIOS had reset and changed from ACHI to some Intel SATA variant. The change solved everything..
Thank you very much, i just recently got the animators blue screen of death and it cost me my previous harddrive. I'm glad i didn't have to go through that again 🙏🏿
What step did work on u?
Thanks, I was having this problem while reinstalling Windows 10. Changing it from RAID to AHCI solved the problem. Before I had RAID and it was working. Anyway, I don't need it, so, AHCI is good too.
When i want to do something with dism\online it says Error 50. What i should do?
Tnx alot man. U desrve the best!
AHCI Setting fixed the issue. Thanks!
Thank you, Great Content👏
Comprehensive solutions! Thank you 👍
Guys!!!
I waa facing this and had tried almost everything listed on different vids/forums and websites. In short, what fixed it for me is...
1) You should see the drive in the BIOS.
2) Turn the Re-size bar in the bios EZ menu ON.
3) Turn off the Intel Rapid Storage Technology
4) VDM is enabled but the other 2 options that are enabled get disabled automatically once u complete step 3.
This loaded the OS after I was fed up with the inaccessible boot device BSOD.
CREATE A BOOTABLE CD OR THUMB DRIVE : 3:31
ONCE THE BOOT MEDIA IS CREATED YOU SEE THIS SCREEN : 3:44
UNINSTALL RECENTLY INSTALLED UPDATE PACKAGES 7:47
AHCI in the BIOS was my fix. It was set to RAID ON. Thank you!
Just say slash when talking about "forward" slashes. 12:19 You can't install any Windows program if you can't boot into Windows. Also, where are the bootrec commands for fixing the BCD ?
Got this when trying to uninstall updates?
dism doesn't support servicing windows PE with the /online option
Sir you are really window champ. I saw this video and my window start working. Thank you very very much.
7:00 You renamed the files and then it went to RegBack. Can you please elaborate it more. I can't find those files in my RegBack Directory. Thanks!
I also didn't find them
Did you find any solution?
Yo what if my pc not going in to automatic repair mode
Yes
AHCI was problem. I have changed graphic card and got that blue screen. This simple change in bios helped me :) thabks!
Btw registry folder was empty.
Omg!! You saved my data! Thank you so much! I was on a call with DELL for an HOUR and they could not help me, and your hack with switching to AHCI mode worked like a charm in under a minute!!! OMGGG!!! Thank you!!!
enabling AHCI mode worked for me, thanks
That was really helpful. Thank you
I have raid on for sata operation, when i hit AHCI, it propmts to a message that i might need to reinstall windows if I switch to it. So, I didn't do it.
I just built my pc and after restarting to enable some drivers it would constantly blue screen I’m so scared I cant even get into the troubleshooting section
Thank you so much. This fixed my problem
"THE MOST COMMON REASON FOR THE INACCESSIBLE BOOT DEVICE ERROR IS" : 7:50
UNINSTALL RECENTLY INSTALLED UPDATE PACKAGES : 7:47
Problem: I reset my windows and now It won’t even open bios I think it has malware
same idk what to do in about to cry rn i just got this pc 3 days ago
Thank you very much! I followed your guide about AHCI and surprisingly it worked! You saved me! Thank you! and Wish you all the best in 2022!
Cool video however my problem is I used macarium reflect to clone the drive. When I installed the new drive in my laptop I get this stop code. So it has something to do with the cloning software or Windows knowing I cloned it and not letting me do that. I really don't know enough about Windows to know what's going on other than if I were to have done a Linux DD command with a Linux system this would have worked perfectly fine. I also did same exact thing using etcher Drive clone and I get the same inaccessible stop code. What do I need to do? You may not know?
New windows update was the culprit in my case.
I have SSD and somehow the the update was showing in my HDD and windows tried to boot using HDD and failed n number of times.
turn to AHCI on and solved aye?
OMG whank u so much the AHCI mode worked thanks :)
Hey this happened to me after updating bios - is there a part on this video that can help? I would pay anything to fix this right now.
Thanks a lot worked after changing ti AHCI mode
When I try to perform SFC Scan Now program, it keeps saying Windows Resource Protection could not perform the requested operation
Excellent well explained and I can able to fix my windows. I tried with several youtube videos and couldn't able to solve my problem . Thanks a lot
Glad it helped
@@WindowsChimp idk if your gonna read this but whenever i try to change SATA to AHCI it says it might prevent it from booting succesfully and could result in data loss, should just do it
Also one more thing, i didnt find SATA MODE, the only SATA related thing i could find is SATA EMULATION, are they the same thing?
5:13 if im told "the system cannot find the drive specified" and I've tried all numbers from a to z, then what should I do? the device shows up in bios but not in cmd
thanks
It worked when i tried the start up repair, tysm
So, what if when I type “c:” it says it cant find it
Lmao what did you do? Your C drive is gone then...
Or you didn't have a c drive and your windows is on a different drive possibly but I doubt it
Same situation
AHCI enable worked and my machine booted first time. Thank you.