Hey guys, hope you are doing great. Check out the Hidden features of Windows 10 in this video. Like 👍 and Subscribe 💖 to the Channel. ua-cam.com/video/yQwh5AvUbns/v-deo.html
Tanks a lot for your video it helps a lot ! However on my case it is most for understanding the problem as for now : 1.Enabling AHCI mode didn’t work 2.Cleaned the hard drive still not working 3.In the advanced options, System restore didn’t work as well as System Image recovery, Startup repair 3.In Cmd Prompt, after typing c:\>dir, there was a $Windows.~BT file as well as a Window.old file (I suspect the problem comes from here) 4.Remove pending update : all command works until 4th command where I get: Error 50 DISM does not support servicing Windows PE with the /Online option so couldn’t finish 5 and 6th command. 5.On SFC scan this message popped after I type the command ‘Windows resources could not perform the requested operation (same as you so still restarted the pc but still not working) 6.On DISM tool also not working. 7.On Check Disk tool, everything went smoothly. Got this message when it was done: Failed to transfer logged messages to the event log with status 50. At this point I’m not really sure what to do next expect from buying a new hardware. I would be eternally grateful if you know what is going on.
Well, every operating system is for computers, and with such a complex thing issues are bound to happen. No operating system can be without issues that may need a slightly techy person to fix
Ehhh. As the comments say, if your issue is a BIOS setting, the beginning works, but the help sorta ends there. The reg backup recovery is probably sound advice (although mine is empty), but the rest of these are iffy at best. . Some of the commands you're showing here are straight up failing even in your own video. There's typos in the commands in the description. They don't work on any install (eg 9:40). Then on top of that you're running DISM with the /online option, meaning you're running it from a fully booted operating system. This is a very different situation than somebody with this "INACCESSIBLE_BOOT_DEVICE" BSOD error who is in WinPE recovery like you directed - and can't use that flag. In theory you should be able to just substitute /Image, sure, but it's situational and doesn't always work. A similar situation applies to your SFC command,, some of these operations only work in online mode, which anybody who is having this issue is not in. . At the end of the day this unfortunately reads like you copied/pasted this stuff from another source w/o actually understanding what is going on. Not trying to be a dick, but that's what it looks like based on the issues with the commands. It may give some people direction though on what they can look into further to try and diagnose this issue.
@@Vaynecenzo It depends entirely on what the problem is. If the problem is caused by a recent Windows update, then the DISM commands might go somewhere. If it's an important file issue the system file checker (SFC) might get somewhere. Both failed for me last time I had this issue, though. Neither helped. From there, if it's caused by a driver you installed you can uninstall it through safe mode. If it's not any of those (broken system file, botched update, or faulty driver), IMO it becomes infinitely harder, and then the best options are either try to restore from an image, and if that fails or you don't have a restore point, format time.
@@akashjosan8729 No idea, I couldn't fix it and ended up just formatting. Took way less time to format & reinstall Windows than I had already spent trying to fix it.
This was a GREAT tutorial! I tried all methods except 2-4 which was due to limited or non-applicable system results and thought that after running the "Check Disk" and still seeing the error. I would have to take it into a shop. However, I decided to try one random action and that was to go back into Advance Options, Startup Settings, and selected Safe Mode. My PC started to process the action. Then suddenly I heard the Windows chime!!! To my surprise my system did not boot into Safe Mode but actually opened Windows as normal. Man was I excited! So I am not sure if it was any of the processes that acted as the contributing catalyst but apparently attempting to initiate Safe Mode allowed the system to boot into Windows normally. So for what its worth. Try going into Safe Mode first and again this was a great tutorial, thank you!
Thanks my man! Had exactly the same situation as yours and after booting with Safe Mode everything worked well. Thanks to the author of the video as well!
Yeeeeeeeeeeeeeeeeeey dam love this dude I thought my mom will kill me she never saw me using it for one day and started yelling me why I'm not using my PC lol 😆
Immense thanks for making this comprehensive video. I got it corrected with AHCI mode on my MSI GT62VR. Do not install the optional update from MicroStar International.
This safe me a lot of confusion when I need to replace my motherboard with a newer one. AHCI mode you mentioned safe me an almost hasty decision to replace my boot SSD. Thanks a lot!
I just built my pc and after restarting to enable some drivers it would constantly blue screen I’m so scared I cant even get into the troubleshooting section
Thank you very much!!! You helped me salvage my grandma's old computer. Thank you very much she had legal files on there that would be a lot of trouble getting them back. Thank you again hope you are doing well!
Sadly all the blue screens and another confliting windows 11 install corrupted my drive but atleast I figured it out and I backed up my data before the loss
I removed the case and cleaned up the driver and some dust I've found underneath and now it works like a charm! Thank you very much for the video, you saved me some $$$ and time!
Wow, this video is really well done. It's easy to understand and even easier to follow. More importantly, it solved my boot problem with one of the command prompt options that I used. Thank you!
my PC wasn’t working because the watch battery died so I replaced it but after that, it’s just been doing this I had to take out the wire for the hard drive so I can reach the battery so that might’ve caused this issue. Whatever the case is this is still not working.
Hello sir, i resetted windows 10 after i got the error. But after it got resetted i still got the error but i can still open the advanced boot options. However. Since most of the videos i found related to this error is only for people who didn't reset their pc after they got the error. *How do i fix this error?* I tried doing what the other videos said and all of them didn't work. Please help me. Thanks.
New windows update was the culprit in my case. I have SSD and somehow the the update was showing in my HDD and windows tried to boot using HDD and failed n number of times.
Dusted my PC out and accidentally set to RAID configuration in BIOS when it suddenly popped up after being powered back on. Took me a few hours until I found this video. A quick BIOS search verified that AHCI Mode had not been set to enabled. Thanks!
What if I can't access advanced settings in bios? I've seen others use certain key combinations while in bios and then after rebooting into bios, the advanced menu tab appears. So far none have worked.
Tried every method but in the end, my command prompt will come up with some error or my commands being unsuccessful. I have lost all hope and i am going to install new Windows tomorrow and loose all my data i had in this PC which was worthless.
Windows couldn't detect the boot partition whilst trying some boot repair commands, yet the windows partition on the same drive was browsable without errors. I received the Inaccessible bsod error after doing nothing but a 5 second microsoft -malware- defender update. I gave up, connected a usb with a copy of windows on it, chose reset in the repair options *but selected to keep my files* .. everything installed in Program Files (installed programs) was removed. The hidden Appdata folder (where programs often keep saves, browser passwords and so on) were removed, but moved to a temporary Windows Old folder on the root of C, just in case you wanted to copy anything back to where they should be, after reinstalling programs later on. Your desktop files, downloads and documents folders should all be ok. Obviously shortcuts on the desktop won't work anymore until you reinstall software. Remove any unnecessary drives or devices before any last resort 'reset and keep my files' option if nothing else works. Run crystaldiskinfo or a similar tool if you can get into windows or after the reinstall to make sure your drives are healthy. If any cautionary messages appear, copy vital data to another device and replace the old windows drive
I have raid on for sata operation, when i hit AHCI, it propmts to a message that i might need to reinstall windows if I switch to it. So, I didn't do it.
In cmd.exe if says. The system cannot find the drive specified. All I’m doing is typing c: and hitting enter. My drive is called drive c but it’s not showing up
Just say slash when talking about "forward" slashes. 12:19 You can't install any Windows program if you can't boot into Windows. Also, where are the bootrec commands for fixing the BCD ?
0:54 Reason 7: Changing the AHCI setting in the BIOS. See article Advanced_Host_Controller_Interface on Wikipedia. In my case I had a new PC that booted Windows 10 and was working. After installing Linux, Fedora 35 refused to boot, the AHCI setting was set to Raid in the BIOS and Fedora couldnt handle that. 2:45 Thanks. Changed setting to AHCI, Fedora boots but now Windows has this issue.
Windows was able to finally recognize the new settings and it adapted to it. Now this new PC dual boots as expected. Thanks for all the help and info making this video!
Many thanks for making me look great, WindowsChimp. I just applied this fix to Latitude 7420 and it worked right away. Thanks (again)…new subscriber here.
Thanks, I was having this problem while reinstalling Windows 10. Changing it from RAID to AHCI solved the problem. Before I had RAID and it was working. Anyway, I don't need it, so, AHCI is good too.
Thank you. My mother's PC had the issue and I believe that the BIOS had reset and changed from ACHI to some Intel SATA variant. The change solved everything..
DELL Latitude 7420 here with error INACCESSIBLE BOOT DEVICE - Auto repair did not work - Changed to AHCI from RAID, didn't help - Could not even find C: with CMD - DISM did not work - sfc /scannow did not help Opened the laptop and disconnected battery and SSD. Connected again, started up and it booted to Windows. Very strange!
Removing cmos battery and power cord then holding power button for 10 secs solved the issue. Now my pc can boot into windows. If doesn't work, try to boot into safe mode using startup settings
Thanks so so much..your knowledge is brilliant 🎉🙏🏆 I had to change to AHCI mode. That's it. Blue screen fixed. 😱 By the way, I had to replace the power supply. Then I got this blue screen problem. I hope this comment will help other people too. 😬✌️
I factory reset my dell omniplex 780 and now I’m having this same problem but I bought a recover disk for windows 10 and it’s still not working. It tells me I have a media cable Failure and some times it comes up as the blue death screen that says what it says in this video. I’ve tried to change the boot order to dvd rom first hoping it would boot the dvd but it doesn’t even do that. I have no idea how to fix this problems can someone please help
I need help my PC is saying Microsoft Windows [Version 10.0.22610.2] (c) Microsoft Corporation. All rights reserved X:\Widows \System32> and it's a widows a 11 and my is Microsoft Windows [Version 10.0.22610.1] (c) Microsoft Corporation. ALL rights reserved.
I cannot reach these tools without a bootable usb drive and if i have bootable usb drive then the command prompt is only for the files in the USB drive.
When i type c: The system cannot find the drive specified. Tried other letters too. Startup repair, system restore, uninstall updates and all other options doesn't work. I have brand new laptop. Maybe 2months in use. Acer predator helios 300. Had windows update jesterday. And today,after gaming for some time got blue screen. Before blue screet it ticks and text appears "Abnormal status reported by rapid storage uefi driver". I tried reinstall windows, but disc selection is empty. Win11
Cool video however my problem is I used macarium reflect to clone the drive. When I installed the new drive in my laptop I get this stop code. So it has something to do with the cloning software or Windows knowing I cloned it and not letting me do that. I really don't know enough about Windows to know what's going on other than if I were to have done a Linux DD command with a Linux system this would have worked perfectly fine. I also did same exact thing using etcher Drive clone and I get the same inaccessible stop code. What do I need to do? You may not know?
Thank you very much, i just recently got the animators blue screen of death and it cost me my previous harddrive. I'm glad i didn't have to go through that again 🙏🏿
Hey guys, hope you are doing great. Check out the Hidden features of Windows 10 in this video. Like 👍 and Subscribe 💖 to the Channel.
ua-cam.com/video/yQwh5AvUbns/v-deo.html
My computer is many more times booting.but no response😢
Can you explain it?.please save me and my computer 😢
!.
..😅
3 years now and this video is still out there helping people. I was able to fix mine after turning on the AHCI mode.
Tanks a lot for your video it helps a lot ! However on my case it is most for understanding the problem as for now :
1.Enabling AHCI mode didn’t work
2.Cleaned the hard drive still not working
3.In the advanced options, System restore didn’t work as well as System Image recovery, Startup repair
3.In Cmd Prompt, after typing c:\>dir, there was a $Windows.~BT file as well as a Window.old file (I suspect the problem comes from here)
4.Remove pending update : all command works until 4th command where I get: Error 50 DISM does not support servicing Windows PE with the /Online option so couldn’t finish 5 and 6th command.
5.On SFC scan this message popped after I type the command ‘Windows resources could not perform the requested operation (same as you so still restarted the pc but still not working)
6.On DISM tool also not working.
7.On Check Disk tool, everything went smoothly. Got this message when it was done: Failed to transfer logged messages to the event log with status 50.
At this point I’m not really sure what to do next expect from buying a new hardware.
I would be eternally grateful if you know what is going on.
Same problem here but its not my laptop so idk how it got to this
Same with my laptop 😓
Did you manage to resolve the issue? I got the same problem and cant figure out what it is
windows is so complicated
I haven't been able to use my computer for days windows sucks sometimes
Well, every operating system is for computers, and with such a complex thing issues are bound to happen. No operating system can be without issues that may need a slightly techy person to fix
atleast it's fixable most of the time unless Apple it always needs part replaced even the issues are not the hardware
ikr
Windows sucks
Ehhh. As the comments say, if your issue is a BIOS setting, the beginning works, but the help sorta ends there. The reg backup recovery is probably sound advice (although mine is empty), but the rest of these are iffy at best.
.
Some of the commands you're showing here are straight up failing even in your own video. There's typos in the commands in the description. They don't work on any install (eg 9:40). Then on top of that you're running DISM with the /online option, meaning you're running it from a fully booted operating system. This is a very different situation than somebody with this "INACCESSIBLE_BOOT_DEVICE" BSOD error who is in WinPE recovery like you directed - and can't use that flag. In theory you should be able to just substitute /Image, sure, but it's situational and doesn't always work. A similar situation applies to your SFC command,, some of these operations only work in online mode, which anybody who is having this issue is not in.
.
At the end of the day this unfortunately reads like you copied/pasted this stuff from another source w/o actually understanding what is going on. Not trying to be a dick, but that's what it looks like based on the issues with the commands. It may give some people direction though on what they can look into further to try and diagnose this issue.
So is there any other fix if it's not the AHCI step?
@@Vaynecenzo It depends entirely on what the problem is. If the problem is caused by a recent Windows update, then the DISM commands might go somewhere. If it's an important file issue the system file checker (SFC) might get somewhere. Both failed for me last time I had this issue, though. Neither helped.
From there, if it's caused by a driver you installed you can uninstall it through safe mode. If it's not any of those (broken system file, botched update, or faulty driver), IMO it becomes infinitely harder, and then the best options are either try to restore from an image, and if that fails or you don't have a restore point, format time.
@@MrSlowestD16 same issue is with me. Now what should i do? Kindly help me
@@akashjosan8729 No idea, I couldn't fix it and ended up just formatting.
Took way less time to format & reinstall Windows than I had already spent trying to fix it.
i have this problem ,you mentioned the right thing about dism , anybody know how to fix via dism or sfc without online
Only video to mention cleaning the hard drive ports, thank you so much!
This was a GREAT tutorial! I tried all methods except 2-4 which was due to limited or non-applicable system results and thought that after running the "Check Disk" and still seeing the error. I would have to take it into a shop. However, I decided to try one random action and that was to go back into Advance Options, Startup Settings, and selected Safe Mode. My PC started to process the action. Then suddenly I heard the Windows chime!!! To my surprise my system did not boot into Safe Mode but actually opened Windows as normal. Man was I excited! So I am not sure if it was any of the processes that acted as the contributing catalyst but apparently attempting to initiate Safe Mode allowed the system to boot into Windows normally. So for what its worth. Try going into Safe Mode first and again this was a great tutorial, thank you!
This solve took a couple of years off of me. Thank you soo much 🙏🙏
My god!!
It worked
I tried almost all the methods on UA-cam and finally gave safe mode a try and it worked.
Thanks a lot!
Thanks my man! Had exactly the same situation as yours and after booting with Safe Mode everything worked well. Thanks to the author of the video as well!
@@o.abrorkhon did u use USB or DVD with OS? Or tried all methods without anything?
@@oliverhaddo9198 nope, i tried without any USB or DVD
I replaced CMOS Battery for a new one and reseated Bios to Raid Mode, I changed it again to AHCI and problem resolved, thanks a lot 😃
Thank you so much bro! I've been trying to fix the problem for 2 days straight until i found your turtorial. The sixth step worked for me!
I was about to reinstall Windows when I saw this. I just needed to change my SATA Controller mode form RST to AHCI in BIOS. Thanks.
It work!!
holy shit it worked
it work, thank you so much
Worked for me to. Thanks for the tip.
Ty for this comment.
It worked! I enabled AHCI mode for my hard drive and I finally got in. Just hoping it doesn't fail again when I boot it next time
Same for me, this dude just saved my life today
Yeeeeeeeeeeeeeeeeeey dam love this dude I thought my mom will kill me she never saw me using it for one day and started yelling me why I'm not using my PC lol 😆
How to enable AHCI!
The drop down says AHCI
@@syedmustafa2363 you ever figure this out?
@@thenamelessranger7747 I had to take it to service centre! None of the methods helped.
Immense thanks for making this comprehensive video. I got it corrected with AHCI mode on my MSI GT62VR.
Do not install the optional update from MicroStar International.
Awesome :)
Not only from them
Evey optional drivers 🥴
Thanks alot you saved me a was thinking that i broke my pc after updating bios i cant thank you enough im subscribing and liking thanks
Thanks for the sub!
Which fix did you use for the bios problem?
This safe me a lot of confusion when I need to replace my motherboard with a newer one. AHCI mode you mentioned safe me an almost hasty decision to replace my boot SSD. Thanks a lot!
Same man, this tip is awesome 😎
Thank you. In my PC it worked by changing AHCI in BIOS.
I just built my pc and after restarting to enable some drivers it would constantly blue screen I’m so scared I cant even get into the troubleshooting section
Thanks a lot bro!!! You really saved my pc! This is the best video available on UA-cam for this problem! 🥰❤️
It says that I cant have acces to the files when I try to type the commandes such as C:\dism.exe /Image:c:\ /Cleanup-Image /RestoreHealth
Thank you very much!!! You helped me salvage my grandma's old computer. Thank you very much she had legal files on there that would be a lot of trouble getting them back. Thank you again hope you are doing well!
It was AHCI. Thanks for the hint. Saved me a lot of time and stress.
its also worked for me
Same I had to enable sata mode, the ports, ahci and disable vmd
Sadly all the blue screens and another confliting windows 11 install corrupted my drive but atleast I figured it out and I backed up my data before the loss
Damn worked for me too
I removed the case and cleaned up the driver and some dust I've found underneath and now it works like a charm! Thank you very much for the video, you saved me some $$$ and time!
I got this after trying to update my laptop. I cannot get it to reset or anything….also won’t allow me to uninstall any recent updates I’ve made.
Wow, this video is really well done. It's easy to understand and even easier to follow. More importantly, it solved my boot problem with one of the command prompt options that I used. Thank you!
my computer doesn't go into auto repair mode after 3 fails of boot please help me bro
Did It Solve??
This is just a video with random solutions from random sources.. and most of the comments seems fake..
my PC wasn’t working because the watch battery died so I replaced it but after that, it’s just been doing this I had to take out the wire for the hard drive so I can reach the battery so that might’ve caused this issue. Whatever the case is this is still not working.
Thank you so much!!!!!!!! 🥳
*Step 1: Enable AHCI mode in BIOS*
Worked for me, I'm truly grateful
When i want to do something with dism\online it says Error 50. What i should do?
Hello sir, i resetted windows 10 after i got the error. But after it got resetted i still got the error but i can still open the advanced boot options. However. Since most of the videos i found related to this error is only for people who didn't reset their pc after they got the error. *How do i fix this error?* I tried doing what the other videos said and all of them didn't work. Please help me. Thanks.
Although I have Windows 10 PE, many of the checks were inaccessible to me; however, I learned a lot so it was worth the like and subscribe. Thanks!
Got this when trying to uninstall updates?
dism doesn't support servicing windows PE with the /online option
New windows update was the culprit in my case.
I have SSD and somehow the the update was showing in my HDD and windows tried to boot using HDD and failed n number of times.
turn to AHCI on and solved aye?
You earn a sub bro! Thank you so much for this I have tried for how many days to fix my pc but your video help me fix by changing only the ACHI ❤️
I use the same things it works thank you
can you help me? ahci mode was already enabled for me and it still happens
did it work now for you? what did you do?
@@wantana1338 i couldnt do anything so the pc cant work
Dusted my PC out and accidentally set to RAID configuration in BIOS when it suddenly popped up after being powered back on. Took me a few hours until I found this video. A quick BIOS search verified that AHCI Mode had not been set to enabled. Thanks!
What if I can't access advanced settings in bios? I've seen others use certain key combinations while in bios and then after rebooting into bios, the advanced menu tab appears. So far none have worked.
I can’t get to it either
it keeps trying to repair disk errors and when i wait it just gives me the blue screen again and goes into a loop
Tried every method but in the end, my command prompt will come up with some error or my commands being unsuccessful. I have lost all hope and i am going to install new Windows tomorrow and loose all my data i had in this PC which was worthless.
Yo what if my pc not going in to automatic repair mode
3:12 If you lock your keys in your car, it's ok! Just open the door, grab the keys, close the door, and bingo. You're good to go!
Windows couldn't detect the boot partition whilst trying some boot repair commands, yet the windows partition on the same drive was browsable without errors. I received the Inaccessible bsod error after doing nothing but a 5 second microsoft -malware- defender update. I gave up, connected a usb with a copy of windows on it, chose reset in the repair options *but selected to keep my files* .. everything installed in Program Files (installed programs) was removed. The hidden Appdata folder (where programs often keep saves, browser passwords and so on) were removed, but moved to a temporary Windows Old folder on the root of C, just in case you wanted to copy anything back to where they should be, after reinstalling programs later on. Your desktop files, downloads and documents folders should all be ok. Obviously shortcuts on the desktop won't work anymore until you reinstall software. Remove any unnecessary drives or devices before any last resort 'reset and keep my files' option if nothing else works. Run crystaldiskinfo or a similar tool if you can get into windows or after the reinstall to make sure your drives are healthy. If any cautionary messages appear, copy vital data to another device and replace the old windows drive
Problem: I reset my windows and now It won’t even open bios I think it has malware
same idk what to do in about to cry rn i just got this pc 3 days ago
I have raid on for sata operation, when i hit AHCI, it propmts to a message that i might need to reinstall windows if I switch to it. So, I didn't do it.
In cmd.exe if says. The system cannot find the drive specified. All I’m doing is typing c: and hitting enter. My drive is called drive c but it’s not showing up
Removing harddisk and cleaning its ports, really hepled to solve my problem. Thank You So much for making a legit video. You made my day❤
im unnable to access all the options that require a password am i screwed?
Just say slash when talking about "forward" slashes. 12:19 You can't install any Windows program if you can't boot into Windows. Also, where are the bootrec commands for fixing the BCD ?
I was trying almost everything, except AHCI mode - end it works... Thanks for saving next dozen of hours :)
None of the fixes worked for my pc
Changing the SATA configuration fixed my blue screen problem. Thanks for the help
Acer Nitro 5 laptop here, changing the AHCI thing is what did the trick for me. Thank you.
When I try to perform SFC Scan Now program, it keeps saying Windows Resource Protection could not perform the requested operation
While watching your video i realise that reset the bios and forgot to choose intel rst instead of ahci .Now its working.🎉
You just saved me hours of redownloading and reconfiguring! Thanks a bunch!!
Too late for me ig I’ll never turn off my pc while it’s on again 🤣🤣🤣
@@That2007YZFR6THUNDERCAT can damage performance. Pc’s should always turned off after using UNLESS it’s a server.
0:54 Reason 7: Changing the AHCI setting in the BIOS. See article Advanced_Host_Controller_Interface on Wikipedia. In my case I had a new PC that booted Windows 10 and was working. After installing Linux, Fedora 35 refused to boot, the AHCI setting was set to Raid in the BIOS and Fedora couldnt handle that. 2:45 Thanks. Changed setting to AHCI, Fedora boots but now Windows has this issue.
Windows was able to finally recognize the new settings and it adapted to it. Now this new PC dual boots as expected. Thanks for all the help and info making this video!
Mine didn't work :(
Many thanks for making me look great, WindowsChimp. I just applied this fix to Latitude 7420 and it worked right away. Thanks (again)…new subscriber here.
I am having same model today I was tired of that and after cleaning Ssd it is working but I stil doubt if it would still come back.
So, what if when I type “c:” it says it cant find it
Lmao what did you do? Your C drive is gone then...
Or you didn't have a c drive and your windows is on a different drive possibly but I doubt it
Same situation
i was facing the same issue. changing to AHCI actually worked.
you got my like and subscribe for that help.
God Bless you.
Thankyou
Nothing works, when I write cd windows/system32/config and shit it says it can't find the path specified
Thanks, I was having this problem while reinstalling Windows 10. Changing it from RAID to AHCI solved the problem. Before I had RAID and it was working. Anyway, I don't need it, so, AHCI is good too.
Omg🥺 thank you! You save my laptop, after watching many videos on how can i fix my laptop, and i was able to fixed it after watching yours. God bless💙
Did everything like you. Still isnt working
what if your not in system drive? it says volume in drive C is system reserved volume serial number directory of c:/ file not found
Try other directories; that is try D
Thank you. My mother's PC had the issue and I believe that the BIOS had reset and changed from ACHI to some Intel SATA variant. The change solved everything..
DELL Latitude 7420 here with error INACCESSIBLE BOOT DEVICE
- Auto repair did not work
- Changed to AHCI from RAID, didn't help
- Could not even find C: with CMD
- DISM did not work
- sfc /scannow did not help
Opened the laptop and disconnected battery and SSD. Connected again, started up and it booted to Windows.
Very strange!
After enablinh AHCI mode in ssd,windows was not going to automatic repair mode,it didn’t worked for me😭😭
was able to solve the problem?
Many thanks! In my case it was caused by RAID seted after bios reset instead AHCI
Removing cmos battery and power cord then holding power button for 10 secs solved the issue. Now my pc can boot into windows. If doesn't work, try to boot into safe mode using startup settings
Thank you thank you!! You just saved me from buying a new computer!! I appreciate your work
If you don't find ACHI in advanced, just navigate to other menu and check there.
I did not find ACHI in advanced but in some other header.
Yeah, it can be at different places on different BIOS.
It worked thanks a lot
this could also appear if you have
chose the wrong sata configuration
Thanks a lot. All i had to do was remove the SSD and put it back in. I guess it wasn't properly connected
but do you have windows 10
I know next to nothing about computers lol which bit is my SSD
@@Scott_Raynor well it located in different places for different computer. But basically, it's what makes your computer run.
AHCI in the BIOS was my fix. It was set to RAID ON. Thank you!
Thanks 🙏🏾 ! Great tutorial 🎉🎉🎉
I’ve had Optane without RAID option enabled before this error. On AHCI it works fine.
The best video on blue screen of death , changed to AHCI mode and problem solved instantly. thanks very much
Thanks so so much..your knowledge is brilliant 🎉🙏🏆
I had to change to AHCI mode.
That's it.
Blue screen fixed. 😱
By the way, I had to replace the power supply. Then I got this blue screen problem. I hope this comment will help other people too. 😬✌️
Was so worried,after changing to ahci mode the problem fixed !!! Thanks man 👍
I fix my Acer Nitro 5 with ACHI enabled option. I almost try to reinstall the window and accept to lose all the data, Thank you sir.❤
Glad I could help
I factory reset my dell omniplex 780 and now I’m having this same problem but I bought a recover disk for windows 10 and it’s still not working. It tells me I have a media cable Failure and some times it comes up as the blue death screen that says what it says in this video. I’ve tried to change the boot order to dvd rom first hoping it would boot the dvd but it doesn’t even do that. I have no idea how to fix this problems can someone please help
In cmd showing directory is not found
what if im stuck in preparing automatic repair
@Koncevics im still stuck. what did u do after?
If you dont have a storage driver BRO WHY DID YOU REMOVE THE STORAGE DRIVER
Turning back to AHCI worked for me thanks 🙏🏽
Thanks a lot 🙏 I almost lost my most important files , But with your help, the problem was solved.
When I type the command you mentioned, I got a hint “ The system can not find the path specified”
In each commands I type.
I don't have a c: drive. I only have an x: drive and it's protected. None of the options worked for me.
Any fixes ?? Same issue
Fresh install it looks like my friend
the SATA method worked. should I leave it there indefinitely?
Thanks a million for all details. You saved my life
I wasted all day trying to reboot my comp lol, the only problem was the ACHI.Good thing I found you
Thank you .
Mine is just constantly on the restart blue page and it’s coming up with keyboard drive error on restarts
I need help my PC is saying Microsoft Windows [Version 10.0.22610.2] (c) Microsoft Corporation. All rights reserved
X:\Widows \System32> and it's a widows a 11 and my is Microsoft Windows [Version 10.0.22610.1] (c) Microsoft Corporation. ALL rights reserved.
I cannot reach these tools without a bootable usb drive and if i have bootable usb drive then the command prompt is only for the files in the USB drive.
When i type c: The system cannot find the drive specified. Tried other letters too. Startup repair, system restore, uninstall updates and all other options doesn't work. I have brand new laptop. Maybe 2months in use. Acer predator helios 300. Had windows update jesterday. And today,after gaming for some time got blue screen. Before blue screet it ticks and text appears "Abnormal status reported by rapid storage uefi driver". I tried reinstall windows, but disc selection is empty. Win11
it can also happen if c:/ has no free space also! deleted few gigs of games and rebooted normally everything is ok
Cool video however my problem is I used macarium reflect to clone the drive. When I installed the new drive in my laptop I get this stop code. So it has something to do with the cloning software or Windows knowing I cloned it and not letting me do that. I really don't know enough about Windows to know what's going on other than if I were to have done a Linux DD command with a Linux system this would have worked perfectly fine. I also did same exact thing using etcher Drive clone and I get the same inaccessible stop code. What do I need to do? You may not know?
Thank you very much, i just recently got the animators blue screen of death and it cost me my previous harddrive. I'm glad i didn't have to go through that again 🙏🏿
What step did work on u?
My computer is many more times booting.but no response😢
Can you explain it?.please save me and my computer 😢