How can I make both tx and rx communication unique so other rf signals and remotes is not affect the communication I tried this but when I was push any rf remote button the receiver stops communication or take wrong data
Can we use any relay module where every time we need not to call fan off light off or both off We have to call only on and things go off after some time automatically
Sir, please reply to this comment, I request you 🙏🙏 How can we increase the range between the rf receiver and transmitter?? Like around 100-500 metres? Please answer
Range depends on models, using some long range models will be better, but if you want to increase range, you can increase the length of antenna accordingly
Yes sir RF module circuit pe complete explanation ke sath video banaiye, complete circuit diagram of RF transmitter and receiver module components used in it etc working explain kigiye step by step, usi circuit diagram ko modified kar sakte hai kya range badhane ke liye. It will be a great video thanks
hey i want to make a system in which two arduino board communicate with rf module and i want to glow two led by using one push button. can you help me?
Bhai mujhe ek prblm aa rhi hai IR sensor ke sath IR sensor ko kaise connect kre or usko decode kaise kre Or us code ko use krke kasie attiny85 ic me programing krke on / off kre plz help me 🙏🙏🙏
@@EngineersElectronics bhaia I had 1 more question in some videos I have seen people using some kind of ICs how do those encoder and decoder ICs work with Arduino
i have huion hs64 graphics pen tablet which is wired, how convert it to bloototh. please make video on how any wired gadjet make wireless bloototh gadjet. if you want experiment on hs64 i will send you
How many channels does it support? I mean how many buttons/led can be connected?. Random information: To make the project compact and cheap encoder and decoder ICs can be used instead of Arduino.
If you are using Arduino with RF module than the number of channels will be equal to number of characters which we can pass.... As I am sending 'a' and 'b' in the project in same way you can use more different characters. But using Encoder Decoder IC will give you only 4 channel.
Strlen means String length... It calculates the length of the byte and send to the receiver. As in our case the string length is one coz we are just sending 'a' and 'b'
Arduino code of transmitter part is show error. Error written is : warning ISO c++ forbids converting a string constant to 'char*' This error is shown Please help 🙏
thanks, your explanation is very nice and easy than others, thats called real teacher.. im from pakistan
Sir lock down ne madad kardi aur video jaldi aa rahi hai
it was a very nice explination sir. i like it.
Bhaii very very helpful 😅😅with reference of your code i got an idea to operate my project thank you so much bhai
Great job sir ,thanks.love from Pakistan
Awesome sir.i always wait for your video...thank you sir
Thank you very much Himanshu sir I have got all information about arduino
Bro make one video on GH rf and arduino
Nice explanation bro
I am waiting a detailed video on this topic.👍
Very nice explanation as always.
Very informative sir🙏🙏
Thank you 😊
I have been watching u since u started and how u made ur channel more creative... Plz make a video on spi and i2c communication protocol
Hi , what will be the code if I wanted to use 4(switches and led's) to make the led's glow simultaneously like each switch is designated for each led
What a explanation....Great work man
yah!, waiting for detalied video
Very good information
Thank u bhayva for your help
It was really helpful thank you!
if there are 2 receiver and 2 transmitter and if we send data then which receiver will receive the data?
This code using virtual wire lib doesn't work on nodemcu esp8266. Can you suggest how to make these modules of rx and tx running on esp?
Very nice explanation sir
Please make videos
Himanshu sir yor is best teacher
Rf transmitter long range k liye kya karna padega.up to 500mtr
Sir two rf circuit banane hain jo dono ek dusre se alag ho...different different kam kren..sir please jrur video banao....
How can I make both tx and rx communication unique so other rf signals and remotes is not affect the communication I tried this but when I was push any rf remote button the receiver stops communication or take wrong data
I want serial programing for weighing machine can you help to do this.
Sir RF modul to esp8266 ka program he aapke pas
Bro how to sent integer... Or hex values.... Pls reply...
Can we use any relay module where every time we need not to call fan off light off or both off
We have to call only on and things go off after some time automatically
Sir please tell to me how 20 mt range mobile detector will make with aurdino
Sir, please reply to this comment, I request you 🙏🙏
How can we increase the range between the rf receiver and transmitter?? Like around 100-500 metres?
Please answer
Range depends on models, using some long range models will be better, but if you want to increase range, you can increase the length of antenna accordingly
Bahut badhiya. Thanks
What if I don't want to use arduino on transmission end? I just want to send high and low from transmitter.
1 transmitter se kitne receive contract kar sakte hain.??????????????????
Sauper video
Very use full video to me thank u
Sir very nice video ,very informative.could you please explain same scheme for more then 200meters distance.
Yes sir RF module circuit pe complete explanation ke sath video banaiye, complete circuit diagram of RF transmitter and receiver module components used in it etc working explain kigiye step by step, usi circuit diagram ko modified kar sakte hai kya range badhane ke liye. It will be a great video thanks
Hlo sir, can't we use only one Arduino with receiver and the transmitter with battery and sensor for transmitting?
yes please make some more videos based on RF sensor and more types of sensor
hey i want to make a system in which two arduino board communicate with rf module and i want to glow two led by using one push button. can you help me?
Bhai mpu6050 ko PCA9685 ke sath kaise run karwa sakte hai kuch example ya code hi bta do yarr
bro I'm getting a santax error in char
can you plz guide me
Bro u r very good
Hello sir how can make token display with this modual
Verry nice tutorials 👍👌 sirji minimum 500 MTR transmission & reciver kaise hoga please iska opor ek tutorial banyega.
We are waiting your next .
very helpful
Sir can we send back values from the receiver to transmitter
how to code apply with unother software like visual studio???
Sir please tell me how can I use serial monitor instead of button and led
Bhai mujhe ek prblm aa rhi hai IR sensor ke sath IR sensor ko kaise connect kre or usko decode kaise kre Or us code ko use krke kasie attiny85 ic me programing krke on / off kre plz help me 🙏🙏🙏
which resister do you use?
How add eeprom with rf remote for last state after power fail
Dear Sir Lora module ke upar Kuch video banaeye
Bhaia hum 1 st code me pull-up ki jagah 4 pin push button bhi use kar sakte hai na
Haan use kar sakte hai
@@EngineersElectronics bhaia I had 1 more question in some videos I have seen people using some kind of ICs how do those encoder and decoder ICs work with Arduino
If you are using those IC than there is no need of Arduino u can get 4 channels without using Arduino just by using Encoder Decoder IC
@@EngineersElectronics ok bhaiya thank you
I want to use atmega8 in place of atmega328 to reduce cost but RH_ASK is too big to compile for atmega8
Sir mujhe ardiuno and rf module se ek drone bnana hai uska remote connection kaise kru
yes pls make a more explained video RF Model
#awesome
Sir ...ek se jiada leds wala project v banao ...thanx
Ha sir 8 se 10 LED aur push button connect Karo na sir ji
How can I receive and count AC low level signal?
Hi can you tell me how can i use infrared and lcd with rf module
sir can you suggest me the books of programing . I also wanted to do programming like you in advance level
Soon I am going to make advance programming tutorial of Arduino on Udemy. I'll let you know about that.
@@EngineersElectronics Can you please make a series on CC3D ?
Bro please make full depth vedio on rf module and it's library how to use it ....
Sir nrf24L01 module ka video chaiye
what is the maximum range
Sir make a video on hc 12 Rx tX module
Sir how can we connect 6 (input) push button and receive 6 output to drive 6 dc motors to this circuit
i have huion hs64 graphics pen tablet which is wired, how convert it to bloototh.
please make video on how any wired gadjet make wireless bloototh gadjet.
if you want experiment on hs64 i will send you
Bhai Bluetooth controlled led matrix ka video banana please
Hey i need help.. I am doing same but it's is not working
Bro can we transfer analog signals . If we can so plz make 4 channel analog program and lets us allow to copy that program
Ple make video on tft display
please mention the name of resister ?...
Pixy2 cam ke upar video banaye sir
and bro what about debouncing as u used button
keep it up bro
w4yu
Sir please make video of interfacing NRF24L01
Dear sir, please sir make a video on HT12 and HT13 that is transmitted and received ic make a fore switching by Arduino
Very very nice nice
Bhaiya nrf module ke upar ek video banaiye
Nice Explanation sir . Sir , don't this module require antenna to be connected for working ? Thank you
Indoor me 40m use Karna he to kya kare
How many channels does it support? I mean how many buttons/led can be connected?.
Random information: To make the project compact and cheap encoder and decoder ICs can be used instead of Arduino.
If you are using Arduino with RF module than the number of channels will be equal to number of characters which we can pass.... As I am sending 'a' and 'b' in the project in same way you can use more different characters. But using Encoder Decoder IC will give you only 4 channel.
@@EngineersElectronics thanks for the information.
@@EngineersElectronics Can you upload the program for 5 or 6 channels
Sir how to make a simple spybug?? Without any mcu
Very nice explanation. Can we use RF module as a bi-directional communication between 3 Arduino's???? Plz help me with this question.
Sir please make a video on esp8266 shield
🤟nice
Please make a detailed video on RF pair using Radiohead library
What is the meaning of sterlen in programme
Strlen means String length... It calculates the length of the byte and send to the receiver. As in our case the string length is one coz we are just sending 'a' and 'b'
Thanks for answer your videos really helps me a lot
Maximum data rate kya hai iss module ka?
Please make one video for breadboard explained
If we use 2 rf modules pair, how can we work then without their signal colliding with each other
using different rate.
How to limit range of rf
How to connect fingerprint sensors in arduino uno and coding.... please 1 video for
please teach us to use nrf24l01
Arduino code of transmitter part is show error.
Error written is : warning ISO c++ forbids converting a string constant to 'char*'
This error is shown
Please help 🙏
Hey tell more about RF modules
2:07 i need full explanation of RF Module
Make a video on esp 8266 please
Bhaii please mrko nano and uno ka rf pe ek vid bna doo
Please
Rf deeply explain