You're welcome, and yeah if your stage 2 looks that good the stage 3 would be ever so sweet, Ive gotta get started on this other motor I have so that I can get some of that work done on my parts because you surely squeeze some big numbers out of them. Im sporting the hell out of those tshirts you sent me. Ive had a few ask about ya and I told them that you will make it happen
When you have a Performer RPM dual plane intake that flows as well as a Super Victor AND have the benefits of the additional low and mid-range horsepower/torque that a dual plane offers over the single plane intake, I cannot think of a better intake, to have the absolute best of both worlds. This combination of the Super Victor level of flow with the low/mid range hp/tq benefits of a dual plane intake, Big Dogs is revolutionizing the ability of the little guy to get the most horsepower, torque and drivability from their engine builds, all this, for a reasonable price! Win Win!!
Perfectly said!! This is our goal. To offer the best of both worlds by combining above industry standard results and below industry standard prices! Being able to enjoy the benefits of high level porting should be experienced by all levels of project budgets, big and small!
Of course we can and have ported and sold Many of them!! Like, subscribe and follow us on our Facebook business page and UA-cam channel at Bigdogs Porting to qualify for our free ported parts giveaways.
Yes. We offer many brand new ported parts. You can contact us on our Google page chat section to obtain our prices if you don't have access to our Facebook business page at Bigdogs Porting
@@MrGsxr10001 we don't run these in stock form and they either receive our stage 2 or Stage 3 porting. With that being said, yes. Once we port this parts they have no issues at all. I can say there are some manifolds like the tfs R Single planes that have port alignment issues so it's not a onshore/offshore thing. Anytime you start bolting on different parts your going to have some issues every now and then.
We have posted flows videos on the track heat and Systemax 2. The Systemax 2 flows better between the 2 by about 10-12cfm on the average which is the very reason it tends to make slightly more hp even though they are very similar in design. Make sure you like and subscribe to the channel
Port. The way it goes through the motor. When we test we try to test the way that parts are used on the motors. If you look at our other carb manifold testing videos you will see how we test them. Very consistent
It's never just "name brand" it's country of origin, BUY AMERICAN AND REAP THE BENEFITS. Beyond that flow numbers are NOT GOD! Too much flow decimates velocity which can hurt more than just doing a quick gasket match and sending it.
You are 100% wrong!!!! The velocity is fine! You are claiming what something is and you haven't even seen the ports or know how we ported them! These manifolds both make a lot more power with our porting over stock. We have customers dyno and track times to prove our porting style makes a lot more power than the waste of time gasket matching you talk about. Gasket matching is a waste off time because many times in a manifold the flow restrictions are in the runners, plenum entry and runners shape and you can't tell the gains you get unless you have a good flowbench! We get in a lot of manifolds that was previously gasket matched by the customers that flows pretty much no better than stock and after we port them they report back huge power gains. You also don't know the combo that these manifolds are going on but we do. If flow isn't that important then why car manufacturers are not using low flowing parts on their performance vehicles? Throughout the years each significant amount of power increases all came primarily from better flowing parts. A 1990 5.0 ho motors Intake manifold flows 150cfm but a 2018 Coyote motors intake manifold flows over 300cfm average runner. Same as the heads. We know what we are doing thank you👍
@@bigdogsportingtonyb2833 yup those hug le gains are the shit. And I'm not wrong, it's a fact too much porting will affect velocity. Same as pressure is created by a restriction of volume. I never said you're porting anything incorrectly I just make the point that too much porting will affect velocity, don't get your panties in a twist and get all defensive Bigdog.
@@RollingRigTraction how do you know the parts have ported too much lol. Its funny how others that post videos of their porting results don't get people jumping on their videos telling them their wrong or something with no proof or results themselves. Also intake port velocity is also affected by the cylinder heads cc, throat percentage, intake manifold runners and other things. If you you don't have anything positive to say on our videos please don't comment at all because we will just remove your comments. We will not tolerate the negative energy.
@@bigdogsportingtonyb2833 clearly you clowns don't bother to read and understand what's been said. I said nothing like what you've just claimed. Do you even read? Are you even remotely cognizant of the English language? Seems not.
We are in Lansing Illinois. Just contact us on our Facebook business page or Google page so we can setup a order invoice for you. It will have the shipping information. We can also send you a copy of our price sheets
Its a no brainer and man does that port work look ever so sweet 💪😎🐕🐶
Thank you!!! And that's just stage 2!
You're welcome, and yeah if your stage 2 looks that good the stage 3 would be ever so sweet, Ive gotta get started on this other motor I have so that I can get some of that work done on my parts because you surely squeeze some big numbers out of them. Im sporting the hell out of those tshirts you sent me. Ive had a few ask about ya and I told them that you will make it happen
When you have a Performer RPM dual plane intake that flows as well as a Super Victor AND have the benefits of the additional low and mid-range horsepower/torque that a dual plane offers over the single plane intake, I cannot think of a better intake, to have the absolute best of both worlds. This combination of the Super Victor level of flow with the low/mid range hp/tq benefits of a dual plane intake, Big Dogs is revolutionizing the ability of the little guy to get the most horsepower, torque and drivability from their engine builds, all this, for a reasonable price! Win Win!!
Perfectly said!! This is our goal. To offer the best of both worlds by combining above industry standard results and below industry standard prices! Being able to enjoy the benefits of high level porting should be experienced by all levels of project budgets, big and small!
I'm surprised that the Edelbrock has the ports balanced that close. Thanks for the videos and I'm a Chevy guy.
🔔😎
The name of the game is RESULTS !!!!👍👍👍
Great video, good info, ya beat the dawg to death repeating yourself though.
Thanks. We have to in order for it to sink in lol
You hogged it out pretty good man I can see the power 👍
@@johnsheetz6639 lol, that precision porting and testing right there. Great results
They both claim to work with either the 2V or 4V heads, how mismatched is it with the 2V heads?
What's your price for a stage 3 port job on the knock off bbc version
@@WestcoastCreole less than five hundred currently
Win win situation!
Hey big dog what does a stag 2 on gt40p's run? Also what would flow numbers average. Thank you for your time.
Message us on our Facebook business page or Google page. We have a price and detail sheet
Dang, can you do a cheap SBC air gap?
Of course we can and have ported and sold Many of them!! Like, subscribe and follow us on our Facebook business page and UA-cam channel at Bigdogs Porting to qualify for our free ported parts giveaways.
is it possible to order a ported ebay air gap style intake directly through you rather than ordering then shipping to you for porting?
Yes. We offer many brand new ported parts. You can contact us on our Google page chat section to obtain our prices if you don't have access to our Facebook business page at Bigdogs Porting
What I want to know is does the Ebay intake line up on all the bolt holes and port locations like they should?
@@MrGsxr10001 we don't run these in stock form and they either receive our stage 2 or Stage 3 porting. With that being said, yes. Once we port this parts they have no issues at all.
I can say there are some manifolds like the tfs R Single planes that have port alignment issues so it's not a onshore/offshore thing. Anytime you start bolting on different parts your going to have some issues every now and then.
Grabbed mine for $130 👍
Now you just need our porting because they don't flow well in stock form
Now port the Edelbrock
We did lol. You just have watched the other videos!
What gasket fit that ported intake?
1250 or 1262
Quick question what flows better a stock trick flow intak or a Holley systemax intake?
We have posted flows videos on the track heat and Systemax 2. The Systemax 2 flows better between the 2 by about 10-12cfm on the average which is the very reason it tends to make slightly more hp even though they are very similar in design.
Make sure you like and subscribe to the channel
@@bigdogsportingtonyb2833 I’m subscribed love the channel!
@@foxbody8320 thank you so much. We are trying to catch up so we can do more videos to help you guys get the most for your money
Were you sucking thru carb or port?
Port. The way it goes through the motor. When we test we try to test the way that parts are used on the motors.
If you look at our other carb manifold testing videos you will see how we test them. Very consistent
Little harder my hands are worn out after porting ebay
Lol, we have specially made tools and equipment to allow us to port a high volume of parts a week. We ship 6-10 orders a week!
It's never just "name brand" it's country of origin, BUY AMERICAN AND REAP THE BENEFITS. Beyond that flow numbers are NOT GOD! Too much flow decimates velocity which can hurt more than just doing a quick gasket match and sending it.
You are 100% wrong!!!! The velocity is fine! You are claiming what something is and you haven't even seen the ports or know how we ported them! These manifolds both make a lot more power with our porting over stock. We have customers dyno and track times to prove our porting style makes a lot more power than the waste of time gasket matching you talk about. Gasket matching is a waste off time because many times in a manifold the flow restrictions are in the runners, plenum entry and runners shape and you can't tell the gains you get unless you have a good flowbench! We get in a lot of manifolds that was previously gasket matched by the customers that flows pretty much no better than stock and after we port them they report back huge power gains. You also don't know the combo that these manifolds are going on but we do. If flow isn't that important then why car manufacturers are not using low flowing parts on their performance vehicles? Throughout the years each significant amount of power increases all came primarily from better flowing parts. A 1990 5.0 ho motors Intake manifold flows 150cfm but a 2018 Coyote motors intake manifold flows over 300cfm average runner. Same as the heads.
We know what we are doing thank you👍
@@bigdogsportingtonyb2833 yup those hug le gains are the shit. And I'm not wrong, it's a fact too much porting will affect velocity. Same as pressure is created by a restriction of volume. I never said you're porting anything incorrectly I just make the point that too much porting will affect velocity, don't get your panties in a twist and get all defensive Bigdog.
@@RollingRigTraction how do you know the parts have ported too much lol. Its funny how others that post videos of their porting results don't get people jumping on their videos telling them their wrong or something with no proof or results themselves.
Also intake port velocity is also affected by the cylinder heads cc, throat percentage, intake manifold runners and other things.
If you you don't have anything positive to say on our videos please don't comment at all because we will just remove your comments. We will not tolerate the negative energy.
@@bigdogsportingtonyb2833 clearly you clowns don't bother to read and understand what's been said. I said nothing like what you've just claimed. Do you even read? Are you even remotely cognizant of the English language? Seems not.
Check out the video that truly shows how many items in your home that are not made in your country of origin. You will be really surprised.
I have the China one where u located so I can send my intake to get ported thanks
We are in Lansing Illinois. Just contact us on our Facebook business page or Google page so we can setup a order invoice for you. It will have the shipping information. We can also send you a copy of our price sheets