You need to compact the match head powder harder so that it shoots with a loud “ Bang” sound and not a “Psss” sound . But then if you do that , the barrel should be steel and not plastic .
@@Unnamed_User make sure you close the back of the barrel properly. I you can’t do welding then I recommend that you heat the barrel until it is bright red then use a hammer to hammer it flat
@@josh8887 well.... I don't really have a workplace so my plan is to try melting some soda cans( something close to aluminium) and let it cool down in the barrel. It's melting point is surely higher than the heat released by explosion of match powder so it should hold. But i am now thinking....how about i just burn the welding stick directly to cover the hole up? What do u think? Thx :D
@@Unnamed_User there is something called an equal and opposite force . When you shoot the bullet forwards, the same pressure will come backwards . I don’t think melting aluminium and pouring it down the barrel to block it will be strong enough. But from your sentence, I’m guessing that you have a welder ? If you have it then that’s the best option . Just get a piece of steel that fits snuggly into the back of the barrel , push that piece of steel in and weld around the circumference of the back . But it would be even better if you could drill a hole straight through the barrel and the steel and then insert a nail to make sure it doesn’t come back . But as you have said , you don’t have a work place to do all this . But we’ll , whatever you’re gonna do , always remember to never hold the gun during the first few shots . You should at least try to fire it with a string from a safe distance at least 3-5 times before even thinking of holding it . You could also screw a piece of L bracket steel behind the barrel in case it fails . A destroyed gun and always be rebuild and improved. But a destroyed eye or a lost life can’t be reversed.
@@Unnamed_User if you can’t weld . You could also use brass-brazing rods to secure the steel to the back of the barrel. I’m assuming you’re from China ? If you are , I’m sure that there’s many shops where you could pay them to help you drill a couple holes or weld some steel together.
After you make inte with metal. Put a clochard in after you put in the powder. Compact it so it tight and nice, and than make a hard ball of aluminum foil, and push it in using something
You need to compact the match head powder harder so that it shoots with a loud “ Bang” sound and not a “Psss” sound . But then if you do that , the barrel should be steel and not plastic .
Thanks!
I am trying to make one with a steel barrel recently
@@Unnamed_User make sure you close the back of the barrel properly. I you can’t do welding then I recommend that you heat the barrel until it is bright red then use a hammer to hammer it flat
@@josh8887 well.... I don't really have a workplace so my plan is to try melting some soda cans( something close to aluminium) and let it cool down in the barrel. It's melting point is surely higher than the heat released by explosion of match powder so it should hold. But i am now thinking....how about i just burn the welding stick directly to cover the hole up?
What do u think? Thx :D
@@Unnamed_User there is something called an equal and opposite force . When you shoot the bullet forwards, the same pressure will come backwards . I don’t think melting aluminium and pouring it down the barrel to block it will be strong enough. But from your sentence, I’m guessing that you have a welder ? If you have it then that’s the best option . Just get a piece of steel that fits snuggly into the back of the barrel , push that piece of steel in and weld around the circumference of the back . But it would be even better if you could drill a hole straight through the barrel and the steel and then insert a nail to make sure it doesn’t come back . But as you have said , you don’t have a work place to do all this . But we’ll , whatever you’re gonna do , always remember to never hold the gun during the first few shots . You should at least try to fire it with a string from a safe distance at least 3-5 times before even thinking of holding it . You could also screw a piece of L bracket steel behind the barrel in case it fails . A destroyed gun and always be rebuild and improved. But a destroyed eye or a lost life can’t be reversed.
@@Unnamed_User if you can’t weld . You could also use brass-brazing rods to secure the steel to the back of the barrel. I’m assuming you’re from China ? If you are , I’m sure that there’s many shops where you could pay them to help you drill a couple holes or weld some steel together.
That canon is so cool
Very good job 👌👍👌👍
After you make inte with metal. Put a clochard in after you put in the powder. Compact it so it tight and nice, and than make a hard ball of aluminum foil, and push it in using something
Oho kya gun hai
😊😊❤❤May aap के video को ही jada dekhta hu 😊😊❤❤ ameging practical science Waw sir Thankyou sir ji 😊😊❤❤
Ye mny 8 ki umar my bnaya tha now i am 16 but i make this with iron rod.
Yo bro you made great thing
Bhai mana bhi Banya tha it is work
awesome
What a creative idea😍😍.... Super sir!
Thank u
*Slo Mo* effect was a bit dissatisfying. Which camera have you used?
Thank u... Nxt time will improve
Great work👍
Thank u
@@BingoArt welcome☺
bhai is pen na ma'am batao
Sooperb ❤️
do i have to use a specific type of match?
no. Any match would be good since they all have powder on
@@anzerepse269 ok
@@week90nator78 im a little late i suppose😂
@@anzerepse269 maybe a little 🤣
This is America
🎉🎉🎉
good
Yo logre crear uno
😍😍
Thank u
For
One use only😂
Napoleonic vibes
I done it with pen cover it worked but I done it again but it not worked
Hi my name'sahad
Hi
fun fact MATCHES CANT PERPELL STUFF he is useing gunpowder to ignite it
No this is matches only
Explosion propels
Hii
Hi
It is fail
This is fake
Is real. Look up "how to make cap gun powder"
It’s not, you just need the right amount of gunpowder and you can fire it heck you can even use it from a firework