FULL BUILD Academy 1/32 IAF F-16I SUFA Parts 1 and 2 can be found in the link below • Step by Step Academy 1... please leave a LIKE and SUBSCRIBE if you enjoy the video
Yet another spectacular build, Peri. I've used your techniques to successfully build a couple 1/48 scale models that turned out extremely true to form. Thanks for sharing that. Looking forward to the next video.
Just stumbled across this video, and frankly I'm taking up knitting, I spent 3 months paining my 1/32 Sufa, stripped it once , used more masking tape that I knew existed , and my paint job is still rubbish compared to yours . my only comment is that when building Academy F-16s attach the upper wing halves to the upper fuselage section, that way you can get a MUCH better fit than attaching them after the wings are complete , other wise your model is a thing of beauty!
Very nice build! I always love big builds like these with lots of after market parts. Just a question: when was this kit released? It looks quite recent.
I'd like some priming advice from you I bought the F4D-1Skyray the model in the box was all white what color should I use to prime this model for the best result.
My poor baby! She can't do 400kts dressed like B-52 😢😣! Amazing, a light weight fighter than "blacken" any bodies 👁️'s still! & then, &then Rip them from the sky!😮😉👍👍
How exactly do you do your washes? I’ve been trying to use enamel over mine after my clear coat. Have not been successful. If I use the wash as is, it drys too quickly and is nearly impossible to come off with just paper towel as you where able to do. If I add more thinner, it eats away my clear coat and melts. Any tips as to what I’m doing wrong?
Firstly I am using acrylic clay washes from UMP that can be easily cleaned with moisten paper If you use enable try to do wash on the panel lines not all over
your a bad man - Ive probably spent more money on aftermarket and paints in preparation now for making my Sufa, than it took to buy the academy kit. Legendary skills there - Love watching your build videos. Keep it up!
Hey! So how should I remove the wheel bay doors to protect the bays from paint I know to use PVA glue but how should I go about carefully removing they covers?
@@PerisModels sorry that was pretty bad 😂 I meant how do you remove the lading gear bay doors protecting the landing gear bays from being closed to take them off so you can install landing gear in the open position if that makes since.
The composite fibre decals you have used. Which one in particular did you use ? Is it the Carbon Fiber Plain Weave Model Car Waterslide Decal 1400 Series ? Thank you . Your video has inspired me to make the kit .
when tinting the canopy, how come you haven't got any fogging as happens in the tinting tutorial? (i also have Gauzy Agent Glass Coat should it be usefull in this case) also, what was the paint to thinner ratio on those yellow/smoke mix on the canopy? as you can tell im quite a beginner and your video is more then informative
A José Alejandro, saludos desde Ecuador. Cuéntame si en Chile es facil conseguir modelos para armar?? Que tan caros son?? Comparativo a dolares por favor si es posible.
Thanks about this tribute. Sufa means in hebrew, storm.
I was waiting for a new video :-) And its another masterpiece!
Thank you 😁👍🏻
ถ้าคุณไม่รู้จริงคุณอย่าเอามาเล่นเขาเสียหายเป็นเงินหลาย ล้านล้านบาทแล้วจากโอกาสที่จะได้ขาย
I must have seen this video a dozen times - and I continue to be impressed with your build - thank you for teaching us how to make better models Peri!
Thanks
Incredible reproduction of what is probably the coolest configuration of the F-16 ever fielded, not to mention, the most effective. Beautiful work!
Thank you very much
Yet another spectacular build, Peri. I've used your techniques to successfully build a couple 1/48 scale models that turned out extremely true to form. Thanks for sharing that. Looking forward to the next video.
That's great my friend well done
🇮🇱🇮🇱🇮🇱🇮🇱🤩😁😊❤❤👍 very nice jet fighter build.
Hello love your work very much I'm just wondering.. what airbrush did you use ?
infinity 2 in 1
Just a comment for the algorithm
Excellent work... One only thing for the realism... Parking F-16 can't have flaps down... And when are down so are the slats...
Great work again...
Thanks Kosta
The client asked for it 😏
@@PerisModels ότι θέλει ο πελάτης 😂😀
Wow awsome work!
Thank you
My favourite variant of the F-16. Does anyone know its radius when fully tanked up because the Israeli's arent making it public.
Excellent build. 👍👍👍
Beautiful. The only thing that bothers me is the muzzle brake for the gun is green.
Beautiful work ❤
that was a nice video, I am waiting for my model and I cannot wait to build it. he gave me some tips on how to take ur time and build a nice model.
Unbelievable... This is Art!!! :)
Cheers 😁
I must try a 1/32 F-16 one day. When I move to a bigger house and can set up a workshop, rather than just a table in the spare room.
You should my friend
Thanks so much , learnt alot watching your videos. I'm making the Sufa now . slowly getting through it.
Excellent work, great paint and weathering job, well done mate, you make my day
Thanks 👍🏻
I liked it at 14:20 - looked like a Deceptacon. But yes, a truly awesome build and edit.
Does it fly?
Never much cared for this version of the F-16, but I can't even pretend not to like this one just for how well you did with it.
Thanks Tim 😃
LOVE, could you do a turkish or a singapore 1/32 F16D+ next
If I get a sponsor or a kit yes I can d0
Just stumbled across this video, and frankly I'm taking up knitting,
I spent 3 months paining my 1/32 Sufa, stripped it once , used more masking tape that I knew existed , and my paint job is still rubbish compared to yours . my only comment is that when building Academy F-16s attach the upper wing halves to the upper fuselage section, that way you can get a MUCH better fit than attaching them after the wings are complete , other wise your model is a thing of beauty!
Colin thank you for the advice and the kind words 🤗🤗🤗🤗
Great build spoilt by so many advertisements which ruin the flow of the build.
Thank you my friend
Unfortunately I have to support my channel somehow 😕
Waiting for build 1/32 f-18e super hornet by trumpeter
Hmmm.....interesting choice
Very nice 🤗
How many working hours does it take?
I haven't really counted
Kbhi bhiaju na yeh kholony pakistan khushbo lga k... Ha ha
Very nice build! I always love big builds like these with lots of after market parts. Just a question: when was this kit released? It looks quite recent.
Thank you 👍🏻
It must be 2010 if I am not mistaken
Amazing build 👍👍👍. Can’t stop watching it.
Great job, your F16 Looks great.
the music is about ear-rape volume
Amazing
Thank you
wow another one!!! what an excellent job!!!!!! congratulations my friend please keep them coming :-) :-)
Thank you so much 👍🏻😁
I'd like some priming advice from you I bought the F4D-1Skyray the model in the box was all white what color should I use to prime this model for the best result.
I would go with light grey
Great work my friend! Cool video 😍👍
Another great build by a true master, many thanks for sharing.
Thank you 😁👍🏻
Great work, Peri. Fascinating aircraft.
Espectacular
What music 12:00 please ?
Thanks from Burgos/Spain. It’s a beatiful work.
Cheers 🤗
Absolutely beautiful model.
Great build well done mate! Love the detail especially the arming flags!
Thank you 😁👍🏻
@@PerisModels Out of interest, how long did it take you to complete the model?
@@TeaPoweredModels probably a couple of months
@@PerisModels Thanks! Once again, great work!
Hi! Another great build! Do you apply a coat of varnish between the decals and the weathering ?? Thanks!
Thank you 👍🏻
Yes I always apply gloss coat after dealing 😉
I must admit yours are the only builds I watch from start to finish without skipping a moment 👍
you should sell them in amazon. I am sure some people would buy them
These are already sold my friend
👍👍👍👍👍
What type of green do you use for the attachment on the side of the ejector seat ?
Just some random light green from vallejo
Enjoy your kit.
Ive done my own 1/48 and just finished. Thanks for the inspiration and the techniks shown!!🙂
You are more than welcome
My poor baby! She can't do 400kts dressed like B-52 😢😣! Amazing, a light weight fighter than "blacken" any bodies 👁️'s still! & then, &then Rip them from the sky!😮😉👍👍
Sooo, bit this is not a new one)) You built it less than year ago. You’ve made one video from two or what?😀 like on it anyway))
How exactly do you do your washes? I’ve been trying to use enamel over mine after my clear coat. Have not been successful. If I use the wash as is, it drys too quickly and is nearly impossible to come off with just paper towel as you where able to do. If I add more thinner, it eats away my clear coat and melts. Any tips as to what I’m doing wrong?
Firstly I am using acrylic clay washes from UMP that can be easily cleaned with moisten paper
If you use enable try to do wash on the panel lines not all over
@@PerisModels thank you! That makes sense. Did you think the wash at all or just use it as is?
@@Dan67518 no i used the wash straight from bottle
suufaaa : )))
Awesome ....
Thanks 👍🏻
I have this beast in my stash, thanks for showing how to tackle it
Cheers 👍🏻
your a bad man - Ive probably spent more money on aftermarket and paints in preparation now for making my Sufa, than it took to buy the academy kit. Legendary skills there - Love watching your build videos. Keep it up!
Cheers buddy 😄😄
More F-16 glory. Keep 'em coming :D
Looks great. What are you using to clean your Airbrush with ?.
Cellulose thinner
Thanks for the reply.
I'd love to start building these larger scale planes,but hell I'm running out of shelf space for the 1\25 scale trucks I build!
Just an amazing build!
Thank you 😁
Cool
love the build but music is really terrible
Thank you
Hey! So how should I remove the wheel bay doors to protect the bays from paint I know to use PVA glue but how should I go about carefully removing they covers?
I don't understand
@@PerisModels sorry that was pretty bad 😂 I meant how do you remove the lading gear bay doors protecting the landing gear bays from being closed to take them off so you can install landing gear in the open position if that makes since.
@@aw4k3n25 I use blue tack to keep them in the closed position
Then just lift them up open
@@PerisModels oh even better than what I though thanks
True beauty
Thank you
great ! where i order a few squadrons of these, along with spares and support ?
Ask Donald Trump 😁😁😁
👏👏👏👏👏👏👏👏👏👏👏👏👏
🤗🤗
I saw your video.
I want to make this model too.
I am happy I inspired you 👌🤗
The F-16I is loaded with some seriously advanced tech, but it's still ugly! :D
😁
@@PerisModels just in case it was taken the wrong way, I was talking about the real jet not your work :D
@@Planehazza its absolutely fine my friend 😁😁😁
arguably the dorsal fin is what i love most about it. I hate the F-16D's with no dorsal fin. always ruins the F-16
✡️🇮🇱 just incredible love the desert camouflage of tha IAF you have done an excellent job 👏 Bravo 🤯
Thank you 😊
using MRP paint very good choice , i using this paints too
Great paints
i just got a PBY-5 catalina and its not easy it looks really fragile and hard
I havent seen it
a pby?
@@taylorrandolph7561 havent seen the model
i havent started on yet😞
@@taylorrandolph7561 get on with it 🤣
sweet video and build im loving itkeep them coming
Itˋs sad, I dont have so much concentration 😂😂
🤣thank you 👍🏻
Mais um show de montagem, maravilhoso!
Gracias
Υπέροχη κατασκευή, συγχαρητήρια !!!😉👍
Φίλε μου Πέτρο σε ευχαριστώ πολύ 👍🏻
I went ahead and just liked it before watching
Great done! ;)
Thank you 👍🏻😁
The composite fibre decals you have used. Which one in particular did you use ? Is it the Carbon Fiber Plain Weave Model Car Waterslide Decal 1400 Series ? Thank you . Your video has inspired me to make the kit .
I believe so my friend
I don't have the label any more...
wow,, wonderful,, keep up the good effort
Thanks 👍🏻😁
Gloss coat on my version....she's doing great thanks to your video!
Great 👌
@@PerisModels Did you use AK thinner with the AK paints?? I got the paint but it "split" badly...unusable....with other decent thinners.
@@mikedwn I had no problems with AK products
@@PerisModels but you used AK thinners or?
@@mikedwn no I always using mr level thinners and now Ultimate modelling products thinners
Incredibly fantastic!! I’m learning a lot from your videos. Does anybody know if MRP Paint is available in the USA ?
Thank you
I dont know my friend
Brilliant!!
Thank you
I LO VE YO UR MO DELS MR!!!!!!!
Thank you 😊
Hi I have a question what did you use for your afterburner nozzle? It’s it just the kit or resin? Thanks in advance
This is from the kit
In other builds I have used resin
Excellent, but would be without music even better
Thank you 👍🏻😁
👍
Thank you
when tinting the canopy, how come you haven't got any fogging as happens in the tinting tutorial?
(i also have Gauzy Agent Glass Coat should it be usefull in this case)
also, what was the paint to thinner ratio on those yellow/smoke mix on the canopy?
as you can tell im quite a beginner and your video is more then informative
I thin the paint more than 50% and apply thin coats
Wow that is amazing, good job my good man!
Thank you 👍🏻😁
Отличная работа мастера!!!
Thank you 👍🏻
Can I have it?
Already sold but I do commissions if you are interested
Send me a message or email
Totally cool !!!
Thanks
Amazing Job!!! Perfect 👍🏻
Feliz año 2020 desde Chile gran trabajo 🇨🇱🤘
Thank you
What is the airbrush your using? I have a Badger Patriot but I can't get particularly fine lines especially for pre shading!
Harder and steenbeck 2 in 1
Fabulous instructional video
Thank you
Peri's Models more than welcome
template link
🤔
would AK's Dark Yellow Wash be a good replacement for the wash you used?
Maybe I haven't used it
Excelente vídeo saludos desde Chile a mi también me encanta los aviones y él aeromodelismo y feliz navidad 👍🇨🇱
Thank you
Merry Christmas to you
A José Alejandro, saludos desde Ecuador.
Cuéntame si en Chile es facil conseguir modelos para armar??
Que tan caros son??
Comparativo a dolares por favor si es posible.
Thumbs up for this outstanding build! By the way...how's the Sea King going?
Thank you
Seaking almost completed. Needs a few final details and find time to edit the last part video 🙄