Це відео не доступне.
Перепрошуємо.
USR 03-09 MBZ CLK-Class W209 DEPO Headlight Installation
Вставка
- Опубліковано 16 сер 2024
- DEPO W209 Chassis Headlight
Click below for product link:
www.uniquestyl...
If you enjoyed this video please Subscribe, Like, and Comment letting us know what your thoughts...
Visit our website: www.uniquestyl...
Follow us on Instagram:
www.instagram....
Follow us on Facebook
/ uniquestyleracing
I replaced my headlights this weekend with stock Hellas and used this video. I tried polishing the old ones several times and the haze always came back and it was impossible to get inside the light and remove the damage. Overall this video is very good but do note there are 2 screws near the foglights that also have to come out. Also, there are small metal clips that attach the plastic bumper cover to the metal fender that are tricky to get loose and reassemble. You just have to play with them and they will eventually slide out/in. The entire bumper cover does have to be removed but you can leave the wiring connected to the foglights, just be careful to place the assembly on a box or something and don't pull the wires out.
beware, there are two bolts hidden behind the foglight mesh, if you have them, that need to be removed for the bumper to come off. Cracked my bumper bc I didn't know about it.
how did you get to the bolts? i don’t want to break the fog light grill clips
@@tominator344the fog light grilled pops out of their metal tabs. you have to be careful not to bend the mesh but don’t worry, can bend it back in shape
@@shafi10a thank you, sadly my tabs were plastic, but zip ties to the rescue haha, I appreciate the input bro 🤙🏼
Sweet man! My bumper is trashed (kinda) and I'm getting a new one! Preciate the upload!
Ive found that a dinner fork works well to remove those clips in the mud guard if you dont have the tool
and a flathead screwdriver with a little twist.
Very helpful. The bumper/fender brackets are a pain. Working blind with no space to move if you do not take out the splash guard. The two bolts in the lower grill opening must be taken out. (found another tutorial that explained that they were there) The clips that attach the splash guard from Mercedes are a bit pricey. Overall quite an easy procedure.
Thanks for the video ,,I think if you remove the front fender lower liner you can reach up and remove the headlight side bolt then remove the top two ,,,without having to remove the bumper cover.
The old headlights with the code 615 are rotary adaptive, rare for W209. They are controlled by a separate control unit, I wonder how Depo are regulated or do they just have a static light?
thank you for this...ordered the removal tools ......of course to get space to work 'TURN THE WHEEL' ...simples ,Doh!
Hi Nik, glad to know that this was helpful for you. Thanks for your support!
Very helpful good music
How do you put back the metal clip that locks the wing and the bumper together ?
Bro im dying, to Put it back on
Old rusty Shit haha
thank you very much from austria...well done...
Thanks for your kind words! Means a lot especially coming from Austria!
My 2004 Mercedes’ clk 500 passenger front turn signal doesn’t blink only stays on , how do fix or replace a part for the front turn signal ??
I have a question on 5:31 bolt size, how much is the widht and lenght of this bolt size? My CLK doesnt has that and i want to find that.
Is there any programming required after install?
Thank you good job now I can get my done!!!😆
Hi Jose, we are glad to know that this video was helpful for you. Thanks for your support!
MUY BIEN EL VIDEO COMO CAMBIAR LOS FAROS DE CLK
Hi there,
Thanks for the video. Can you please help me out with the sandwich clips? What are they called? TIA
Thanks for the video! Fantastic work
No problem, thanks for your kind words Charlie!
Thxs mate.
Hello, thank you for a very informative video. Will this same procedure work on a Mercedes CLK 320 coupe? I have the Hella lamps. Thanks!
Hi Victor, thanks for your kind words. May I kindly ask if you are referring to the W208 Chassis (1998-2002 CLK)? If so, some of the removal may be similar, however, there are various things slightly different due to the chassis completely being different. We apologize for the inconvenience of not being able to accurately confirm as we have yet to work on a local W208 Chassis. Thanks for checking with us!
Thanks for you your reply! I forgot to put that it is a 2005 CLK 320 Coupe W209 chassis with the Hella halogen bulbs.
Hi Victor, if you have the W209 Chassis, the bumper removal should be very similar as to what is shown in the video. Thanks for checking with us!
Hello! thank you for such a great tutorial.... i have a c230 coupe do you think these headlights would fit on mine if so can you tell me where to get them... they look nice .. thank you again and great job
Hi sorry for the late response and for your kind words. I would be more than glad to help! Please feel free to give us a call or message us. You may reach us here - www.uniquestyleracings.com/index.php?route=information/contact
If messaged, we will be sure to follow up as soon as possible to answer any questions you may have. If you have the "2D" W203 Chassis with Factory Halogen settings, we should have upgraded headlight set for your vehicle. Thanks for your support!
Thank you so much for the video. Where can I get the black projector headlights for my clk 550 amg?
Hi Juan, no problem - glad to be of assistance! Please feel free to contact us directly to confirm your (1) Year and (2) Factory Settings for your CLK550 so we can help lead you to the correct listing:
www.uniquestyleracings.com/index.php?route=information/contact
Thanks for checking!
Good movie
Hi , i have one question , my clk 200 05 has the normal halogen headlights are these depo headlights for xenon clks or also for the halogens ?
Nice vid
Does the plastic clips go back in again? They seem very loose. Won't they come off when re-using them?
Hi, if you are referring to the plastic clips for the mud guard and the bumper underside, there should be a middle insert that you are removing to remove them. Without the middle insert, the plastic clip will not hold. If the plastic clip is damaged or broken, this would also cause them not to hold in place firmly. I hope this helps clarify things best.
Yes I was referring to those clips for the mud guard and bumper bottom. Thank you very much!
No problem, glad to be of assistance!
Hi, Are The Convertible Headlights Different From The HardTops?
Thanks for asking. As long as you have the W209 Chassis, I believe the headlight fitment should not be affected between the coupe vs the convertible models for the W209 Chassis. You do need to check Factory headlight settings as the Factory Xenon vs the Factory Halogen headlights are not interchangeable. Thanks for checking.
hi i love the headlamps look very nice I have the same car w209 clk240 coupe but I have a 2002 I see it say for 2003-2009 will the fit my 2002 model same shape car
Hi Jermaine, thanks for asking! If you are sure that you have the "W209" Chassis and not the older "W208" Chassis, then the headlights shown in the video should be a plug and play fitment as long as you have Factory Halogen settings.
If you are ever unsure whether if you have the W208 or the W209 Chassis, please feel free to contact us on our main site and also forward a clear photo of your vehicle for us to confirm for you:
www.uniquestyleracings.com/index.php?route=information/contact
Thank you!
Thanks for the tutorial, though you didnt place the bumper correctly.
I was just gonna say that it doesn’t look right lol
How do you re- assemble the bumper so that everything aligns correctly. Maybe those headlights aren’t a correct fit? Was gonna replace my halogen headlights with hella and want everything to look even.
Ive seen this many times with these cars on the road where the bumpers don’t look like they were installed correctly 🙄
The small metal bracket hes removing at 2:00 is the problem. You have to bend it a bit together and make sure when you put it back in, that you push the bumper upwards, so that there is no gap. I fixed my bumper a couple of days ago and its sitting perfectly now
Cool thanks for the tip 👍
good job bro..
Thanks for your kind words and support!
😂 geht auch ohne die stoßstang zu demontieren ist nur etwas fummelig 😅
I am so truly warning anyone thinking of using these lights.............they fail constantly. No kidding people. 2 in a row for me and NEVER again
You serious? You think that looks good at the end? Everything is put back funky and there are gaps LOL
Thanks :)
Glad we can help!
Fucking really Mercedes??? My god! Everything in this car is a pain in the ass. I just want to put a new headlight in and can't see a damn thing smh. This is ridiculous!
Can this guy not talk what’s with all the pointing ?
It’s a big world - not everyone speaks the same language…
Spaltmaße am Arsch