Bootleg CSM 1.5 Kabuto Zecter Kamen Rider Kabuto 国产甲斗1.5

Поділитися
Вставка
  • Опубліковано 12 січ 2024
  • !!!! When in Mode E, all future switch on zecter will be in Mode E.
    !!!! Press [2] & [3] and hold when switch on - Zecter will reset to Mode A and unlock from Mode E
    There are 2 version of the bootleg CSM 1.5 Kabuto Zecter. One is released quite some time with supposedly better Q.C. ( which may not be the case ) and this one that I have seemed to be from the manufacturer that makes the bootleg 1.0. I only show for Mode D which is the pure CSM 1.5 mode.
    The 5 modes of this version is translated as follows:
    Mode A (CSM 1.0):
    * Normal switch on
    *** Finisher 2 - After press [1] [2] [3], press any 1 button for Hyper Kick
    Mode B (CSM 1.5 - Tendou mode)
    * Press [1] and hold when switch on
    ** Henshin, Cast off, Rider Kick will follow with a Tendou show line
    ** Long press [1] [2] [3] special show line
    ** Henshin 1 - Normal plug in - 1.0 fast henshin
    ** Henshin 2 - Press [1] - plug in - 1.5 normal henshin
    ** Henshin 3 - Press [2] - plug in - 1.5 fast henshin
    ** Henshin 4 - Press [3] (flying zecter) - Press [3] (catch zecter) - Press [2] / [3] (henshin line) - plug in - show scene henshin
    *** Finisher 2 - After press [1] [2] [3], press any 1 button for Hyper Kick
    *** Finisher 3 - Press [2] - Press [1] [2] [3] - no standby music Rider Kick
    *** Finisher 4 - Press [3] - Press [1] [2] [3] - press any 1 button no standby music Hyper Kick
    ~ UnHenshin 2 - Press [3] - Remove Zecter - No zecter flying sound
    Mode C (CSM 1.5 - Kagami mode)
    * Press [2] and hold when switch on
    ** Henshin, Cast off, Rider Kick will follow with a Kagami show line
    ** Press [1] - Kagami show lines in Zi-O show ( 7 parts )
    ** Press [2] - Kagami normal show lines
    ** Press [3] - Effect sounds
    Mode D (CSM 1.5)
    * Press [3] and hold when switch on
    (Refer to Mode B but without show lines)
    Mode E (CSM 1.0 of previous bootleg)
    * Press [1] & [3] and hold when switch on
    !!!! When in Mode E, all future switch on zecter will be in Mode E.
    !!!! Press [2] & [3] and hold when switch on - Zecter will reset to Mode A and unlock from Mode E
    This one also comes with stickers that are extremely difficult to remove. Have to use a plastic scrapper and goo-gone to remove them. Funny the sticker reads "WT" which is Wan Tai "万泰", trying to sound like "万代" (pronounced as Wan Dai) which is Bandai in chinese.
    Thanks for watching!!!!

КОМЕНТАРІ •