1911 Franklin CycleKart Video 1
Вставка
- Опубліковано 9 лют 2025
- Starting a new build. This time an Edwardian CycleKart. A different set of 'Guidelines' apply.
A parts list is available for download on our FaceBook page, CycleKarts North America. Look for it under the FILES tab.
18" wheels link, order 4 fronts: www.dhgate.com...
Amazon Parts list: amzn.to/3ybsYXA
Obviously part prices are subject to change.
Etsy Store:
www.etsy.com/s...
Want more information
www.cyclekarts... OG web page of Michael Stevenson
www.cyclekartc... Forums
www.renegadecy... bitchin parts!
www.huntsville... get started here
The only Facebook page you need:
/ cyclekart
There are good regional pages, but the North America page is the best for just about everything CycleKart related.
Amazon AFFILIATE DISCLOSURE: This video and description may contain affiliate links, which means that if you click on one of the product links, I'll receive a small commission. I won't put anything here that I haven't verified and or personally used myself.
I really like this one, can't wait to see it done.
Thanks, your build is super cool too.
That's a really cool car to build! Looking forward to this series!
Thanks!
I think it’s a good design I’m looking forward to seeing you build it. Thanks Steve
You and me both!
Interesting car! It will be fun watching this build, Steve. I like the swing suspension for the rear axle.
This one is all new to me, so a bit nervous actually
@@stevevinson6030 I think you have a Traxxas Slash hanging behind you look at that for possible inspiration.
I have total confidence in you.
I dig those wheels, I was thinking of doing a Edwardian kart to!
It is a new adventure, I blame Kelly
That is so freaking cool
Thanks, I am enjoying this one
This is going to be a sweet build Steve, looking forward to seeing the final product.
Thanks, this one is a challenge
Great project! look forward to the build videos.
Thanks! 👍
I like the new project Steve and that moustache keep them both growing boy . 🇬🇧🇺🇸🇺🇦
Thanks, the stache will match the kart
That will be one impressive kart when you are done. Will be following this one for sure.
Thanks, I am learning how to do this all over, as this is a completely new design for me.
This is like UA-cam crack!! Thanks for all your videos! I enjoy the technical details and workmanship along with your thought process on how to make it happen. Hope to see you out there someday!
I appreciate that!
I will be following your build closly. I resently went to a cyclecart event near rainy Leicester in England. A really friendly event, and it was a job to get away without promising to build one!
Very few who have built a CycleKart have regretted it
This is pure mechanical Art!
Thanks, this will be fun build.
huh I didn't realise you go so far, I thought they'd all be the same but with a different body. This is a really cool build :)
Certain inspiration cars require a different approach. They all start to look a little similar otherwise, this is going to be fun one
@@stevevinson6030 I noticed you don't have an email listed. I was hoping to ask you for your plans so I could make a version of this for BeamNG when you're finished with the project :)
Sure, steve.vinson.realty@gmail.com
That moustache is starting to develop a life of its own.
it has its own area code.
OK maybe it’s obvious but where are you planning to put the engine on this one? If you’re putting it in the front that would be nice to see that you could use an exhaust pipe that would look like all the fake exhaust pipes. Then you could run a chain down the length of the chassis to the rear suspension pivot plant and then have a second gear from the idler to the drive axle so that as the suspension moves, it won’t caused the chain to derail. Of course you need The idler arm and drive axle set up, even if you put the engine on the rear deck.
it will be mounted on a swing arm under the seat and connected to the axle via a chain, just like a standard cyclekart
@@stevevinson6030 The basic geometry if you don’t have an idler arm at the pivot point, will cause the chain to get tight and possibly damage the engine or axle or chain when the spring compresses making the axle, go up, which will swing away from the engine. When the axle is going down as the suspension recovers or drops down, some, it will become slack, and the chain can derail.
@@duanemiller5606 Pretty sure he will have the engine mounted to the swing arm/rear axle so it will remain in the same plane as the axle.
Thanks. Steve for your reply. Would it be possible to send a set of your plans as I’m just starting a cycle kart. Thanks. Clive. Uk
Digital download available here. www.etsy.com/listing/1483881216/cyclekart-frame-plan-full-scale-digital?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=cyclekart&ref=sr_gallery-1-2&sts=1&dd=1&referrer_page_guid=f77ad778aa7.02c23972d96374309452.00&organic_search_click=1