Check out more tools under $20: 12 Tools Under $20 Every Woodworker Needs - ua-cam.com/video/QCDaE-0pXoY/v-deo.html 8 tools Under $20 YOU Told Me to Buy - ua-cam.com/video/Xd0JjlRvc-U/v-deo.html
Hey Brad. Make sure you keep your 3M organic vapour mask in a sealed container when you are not using it. As the cartridges contain activated charcoal which will continuously absorb vapours. Also when you can smell the chemicals or solvents etc when using the mask you need to change your filters. Love your content. Chris the Paint Shop Guy.
Your wife should have a sleep study. I was diagnosed with sleep apnea and getting a CPAP really improved my sleep and my health overall. My wife ignored it for years also as I snored. She then noticed that I was actually stopping breathing in my sleep and that it would cause me to wake up for a moment to breathe and I would go back to sleep unknowingly. She recorded me with her phone and had me watch it so I would take it seriously. I am so glad I got help.
I second that. I’m constantly tired no matter how much sleep I get and my wife has noticed me snoring more often as well as stop breathing at time throughout the night. Going to get a sleep study done soon.
A CPAP will change your entire life for the better. The masks are so unobtrusive now, especially if you’re a nose breather because you don’t need a mouth mask. A convenient side effect of getting a CPAP was my decades long battle with ocular (aura) migraines. Literally overnight I stopped getting them. It’s been 2 years and I don’t think I was *actually* sleeping before that time.
@@rootvalue I have a dream wear mask. It's great. It also makes it very obvious when you are dehydrated. The lines on your face are a result of being dehydrated. 😁
I second this! I was diagnosed with Obstructive Sleep Apnea after my wife insisted that Something Must Be Done. So I have been using a CPAP for over 15 years. The cost is covered by most medical insurance - or in my case, my VA Disability medical benefits.
Hey so that 11in1 (or whatever the number was) with the hexes, I think the hex cutouts are for the disassembly of paint guns for cleaning after use. The tool I have that like has the right size to loosen the nozzle and other parts on the paint sprayer. Pretty handy so I don't have to go hunt for wrenches.
The 8 in 1 or whatever they call it has those wrench cut outs for paint sprayer hoses. If you work with an airless sprayer, they're pretty handy. For everyone else, stick with the regular 5 in 1. The new ones at harbor freight are like 5 bucks.
Your tip at the 5:16 mark reminds me of another trick I used. I have a bigger magnetic tray and I spilled some nails (I think it was), and since I don't have a magnetic sweeper, what did I do? I slapped the magnetic tray to the underside of my hand truck and used that as a quick-and-dirty magnetic sweep. Worked like a charm.
Saw you have a homemade 3/4“ stop block that you use with the fence clamps. If you're still skeptical of 123 Blocks: adding 1" to your cut is easier math than adding 3/4“, and the clamp holes are already there!
@@Fixthisbuildthat Fit is everything in respiratory protection. Technically, your beard negates the half face respirator from passing a fit test. You will still be exposed to fine particulate and vapor without a proper fitting mask. If facial hair is unavoidable, consider investing is a PAPR (Powered Air Purifying Respirator) system. You can get the same filter styles to fit these systems, the head tops can be used with facial hair, and they add a nice cool breeze while you work. 3M TR-600 is the way to go. The way you use the half face respirator is for sure better than nothing. Just figured you should know about the correct solution for your hazard exposure. I too am too vain to shave my beard, and the PAPR has been my saving grace.
The best purchase I ever made for my shop is a pair of bifocal safety glasses. I struggled with over-sized goggle-types to wear over my eyeglasses (which often meant that I just skipped wearing the safety glasses at all...) - and then I found the bifocal version about 15 years ago at the Woodcraft store in Boise. Those safety glasses are now the very first thing I put one when I go into my shop!
I wear prescription eyeglasses with polycarbonate lenses. In addition to being lighter, the PC lenses are VERY impact resistant - but they are NOT ANSI rated. For that reason I also wear ANSI rated goggles over them, and/or my Trend Airshield Pro (which also protects my asthmatic lungs.) Years ago I used to have conventional safety glasses, but my prescription made them both heavy and expensive. (Fortunately, they were paid for by employers in my pre-retirement careers.)
For anyone interested in those magnetic parts trays, shop around online and you will find a variety of sizes and shapes to go with whatever projects you do the most. There are small rectangular ones the size of that tray of screws you dropped on the floor. I find it useful to pre-load those small trays with common fasteners so they are within arms reach, and you can even turn them on their side and have them stuck to a magnetic backsplash over your work area. Doesn't take up as much space as a bunch of plastic trays and there is no risk of knocking them off the bench (and even if you did the fasteners would stay in the tray).
Great Video. My favorite part of those 3m masks is when you are wearing glasses the air goes out the port on the nose, so your glasses don’t fog over. Complete game changer.
Love that box cutter/scraper!! It’s larger in size, so for me with arthritis in my hands, it will be easier to use. And I could actually use the scraper part.
The Kreg panel carrier is worth the money. I bought one a few months ago. Not only has it saved my back, but it makes bringing sheets in and out of my shed easy. It even helps when putting sheets on saw horses.
Regrading the 3M filter mask, I recently realized there are different models with different sizes. Since switching to the right size (M->L) it seals better, and is much more comfortable. And I use it much more.
Thanks I have had a glubot for over a year now and never knew about the cap being storage for the tip cap. that was the only thing a hated about the glubot was the tip cap always hanging in the way. Great job.
The 6 in 1 painter's tool, to me, is a must have tool for every shop. Never knew what the curved part was for. As for the magnet tray, I keep a couple of the Mag Switches floating around the shop. The advantage they have over the magnetic tray is they have an off/on switch. So, pick up the screws, bring them over the container, turn the mag switch off and they fall into the container. I also use them when fishing for a screw or nut that has fallen into the saw dust/shavings piles. Big piles from the wood lathes.... Also, I love the router/sanding matts for the shop. Get mine from Woodcraft, but sure there are others. They provide padding for your fine pieces of wood, and also fairly non slip. I have them in the drawer where I keep my bench chisels. They are also great for under your sharpening stones, both for the kitchen and the shop, and under the cutting boards in your kitchen.
So as a painter, the ass end of the tool I use to fix wall after i take a nail or screw out a wall before i fill hole. My foot is the " hammer" you speak of. The scraping fat end can also take out outlet screws.
Great tips! I bought the glue dispenser and painter's triangles before the video was even over. I stain 2 sides of wood a lot and the triangles are a better way than how I've been doing it. I bought the Kreg plywood/drywall carrier about a month ago and wish I would have had something like this decades ago. I carried 22 sheets of 1/2" drywall out of a trailer and up flights of stairs onto my second floor, by myself, in about a half hour. Without the Kreg tool I would never have been able to get them upstairs alone.
Dude, what a great video! My Christmas wish list just got bigger (the wife especially liked the last one, since she's the master stainer of the family). Thanks again!
I think you have those reversed.. 2097 folters are absolutely rated for organic vapors. They were a mainstay in the injection molding shop I worked in for a decade.
For glue I also really like FIFO bottles with silicone dispenser nibs, they’re usually 6 for 10$ and they have so many household uses for thick liquids.
My Dad was a Night Custodian at one of the local High Schools back in the 90's. He kept a 5-1 Painters Knife in a holster on his hip. I have it now and use it regularly at work too. Someday it will go to my Son.
This is D.&T. TOXIC RC, IVE BEEN BUILDING SINCE 9 YRS OLD LICENCED AND CANT SAY HOW LONG LOL, VERY NICE TO HAVE HEADS UP FOR THINGS THAT CAN BE PRACTICAL AND EFFICIENT, THANKS
Great video! Watched a similar video not to long ago but with tools under $50, would be interessting to see what your recommendations in different price ranges are.
at the 6:14 mark of this video you are putting the full sheet of plywood on some kind of cart. Can you tell me what cart that is. I think I can use that to move some 4x4 panels for a platform I have. Thank you very much.
Safety glasses are a must! I used to be a machinist, now i was wearing saftey glasses but a metal sliver somehow got under there and into my eye. I woke up that same night around 2am and felt like i had flash burn. By 8am that morning my eye swelled shut and felt like it was on fire. Everytime i moved my eyes the sliver was cutting the inside of my eyelid. Eye doc just used a magnetic needle to extract it. But took about a week to heal and any sort of light would immediately make me tear up. I was rocking sunglasses indoors and an eyepatch that whole week. Its was painful to even watch tv.
Really useful video. One thing about the respirators - for them to work properly the wearer needs to be clean shaven (I have a beard too, but I have had to shave it off to wear a respirator while working with hazardous materials). Facial hair disrupts the facepiece seal almost completely negating most of the utility of wearing the respirator with organic vapor cartridges and/or particulate cartridges. There is a reason why workers occupationally exposed to hazardous materials and required to wear respiratory protection based on air sampling are required to be clean shaven to ensure they pass what is called the fit test and also to ensure the best possible facepiece seal.
You need to check out the Purdy 10 in one folding paint scraper, another really nice folding tool is the Kobalt chisel with the folding handle I recently got a double sided folding pull saw from Temu and the handles fold together all three excellent ideas for a tool bag. I like the Craig marking tool you did in another video might be my next purchase. All these items are under 20$ as well.
The 15 in 1 putty knife has the hex wrenches for breaking down a spray gun. One size fits the tip and the other where the paint cup attaches. Useful if you are someone who sprays allot and don't want to carry the extra tools.
Safety dude here. For the respirator, make sure to shave and get a good seal. Like another commenter said, keep the cartridges in a bag. I really like 3M respirators because they have a design that routes air awayu from your glasses. On the goggle, the enclosed style will also keep chemical splashes out of your eyes. On the ear protection, ear plugs are cheaper and more effective, but you need to get a proper fit. It should sound like you are underwater or holding a shell against your ears. See if you can get a sample pack from the company.
The enclosed safety goggles are also great if you wear glasses, the DeWalt ones (look like the pair you had there) and some other brands have enough clearance to wear normal glasses underneath comfortably
Would love to see a video comparing tools from a beginners standpoint, sort of a guide for what power tools are best to buy first for various types of work if you don’t have any big tools to start like if you want to make furniture get this if you want to make small things get this if you plan to work with a lot of plywood or if you plan to work more in 2x4s get this
6:08 - that is REALLY useful! I often can't quite reach the edges of the board, so I have to either use my might of Thor to lift the board like this with my bare hands, or do the lever-lift from one end. And plywood boards are heavy!
I have the 1st razor knife/ scraper. It is good for glass. However for me, it is not good for scraping/ removing caulk as the handle is too thick and hits the tile keeping the blade at too much of an angle.
If you liked the Pentel graphgear 1000 the rOtring 800 retractable mechanical pencil is on another level! It's the best feeling pencil with a nice solid metal weight to it. It's also great for fidgeting with the coolest opening mechanism ever thanks to German engineering.
While I generally like Kreg tools & have a number of them, I don’t like their prices on some items. Instead of paying for the Project Blocks & Painter Pyramids, I just purchased a bag of 12 hockey pucks, rounded of some 1/4-20 bolts to points for $19.99 on Amazon. $1.67/each plus the price of the bolt.
Nice presentation. Your video not only fed my curiosity but was also entertaining, pity these useful items were not available a few year back; it must be nice to use.
FWIW, Harbor Freight has a HUUUUGE set of different mag parts trays, different sizes, shapes, colors, all at pretty good prices. And this is the kind of thing that really can't be done wrong, so, yeah, HF is one of the better ways to go with these. Regarding face protection, even better is Amazon: UVEX by Honeywell Bionic Face Shield with Clear Polycarbonate Visor (S8500) Just a hair over US$21 as I write. They allow people who wear reading/closeup glasses to use them comfortably. This also flips up out of the way if you need it, and is usually far enough away from your exhalation that it does not fog up overmuch. P.S. another thing of some relevance is bifocal safety glasses, which provide some assistance with seeing limitations for those of us with less than perfect eyesight. Not sure about wearing with any kind of respiration mask, however. There seems to be a limitation there, in that there are not many things that allow both or provide both...
The magnetic tray has a better use if you need a place to hold nuts, bolts, screws etc. But have no flat surface like working inside a duct or metal area, you can just stick it to the side of the metal and hold nuts and bolts while you work
5:20 Try this. Turn your magnetic bowl over and set you plastic tray on top so the magnet pulls whatever is inside locking down your container so it does not fall on the floor.
Paper towel trick with magnet made the video worth watching. For those interested in the switch utility blade please be aware it requires a specialty blade; you're regular utility blades will NOT work. Just be aware.
The panel carrier is so helpful. They are Exceptional for dragging about Horse "Stall Mats". I think it was Lee Valley or perhaps Duluth Trading Post that sold a Heavy Aluminum Version called a "Gorilla Grip". Though at about forty dollars, it was not cheap....it was money well spent.
Around the 10 minute mark, you're discussing the breathing protection. What's your opinion on the effect of your beard on the effectiveness of the mask? I stopped growing my yearly winter beard when COVID hit because of the problems with a beard over an N95 mask, and when I'm in the shop, I use a dust protector that has a mouthpiece (like in a snorkel) that connects to a pipe that hangs over my back to two hepa filters, called a Resp-O-Rator. It's the only mask that I know of (other than the very expensive full face forced air systems) that can be effectively used with beards.
This might make it under your $20 limit (depending on the exchange rate), but it is always in my pocket. My father had a brass one, but Lee Valley came out with a steel one. Lee valley marking multi tool
Hi South Texas here! Thank you so much for making awesome content for us! I really enjoy your videos. Honestly, I would watch you over any streaming service. Great job!! Also, I appreciate you explaining the respirator and eye protection. I haven't used my mask yet but I have the pink filters. I didn't know about the other filters.
Check out more tools under $20:
12 Tools Under $20 Every Woodworker Needs - ua-cam.com/video/QCDaE-0pXoY/v-deo.html
8 tools Under $20 YOU Told Me to Buy - ua-cam.com/video/Xd0JjlRvc-U/v-deo.html
Don't use those plywood handle clamps on cement board (Hardie board) it will snap them.
Love the channel! Happy May the 4th sir!!! I am also a HUGE Star Wars fan.
Hey Brad. Make sure you keep your 3M organic vapour mask in a sealed container when you are not using it. As the cartridges contain activated charcoal which will continuously absorb vapours. Also when you can smell the chemicals or solvents etc when using the mask you need to change your filters. Love your content. Chris the Paint Shop Guy.
Your wife should have a sleep study. I was diagnosed with sleep apnea and getting a CPAP really improved my sleep and my health overall. My wife ignored it for years also as I snored. She then noticed that I was actually stopping breathing in my sleep and that it would cause me to wake up for a moment to breathe and I would go back to sleep unknowingly. She recorded me with her phone and had me watch it so I would take it seriously. I am so glad I got help.
We've actually been talking about that recently. Sounds worthwhile
I second that. I’m constantly tired no matter how much sleep I get and my wife has noticed me snoring more often as well as stop breathing at time throughout the night. Going to get a sleep study done soon.
A CPAP will change your entire life for the better. The masks are so unobtrusive now, especially if you’re a nose breather because you don’t need a mouth mask. A convenient side effect of getting a CPAP was my decades long battle with ocular (aura) migraines. Literally overnight I stopped getting them. It’s been 2 years and I don’t think I was *actually* sleeping before that time.
@@rootvalue I have a dream wear mask. It's great. It also makes it very obvious when you are dehydrated. The lines on your face are a result of being dehydrated. 😁
I second this! I was diagnosed with Obstructive Sleep Apnea after my wife insisted that Something Must Be Done. So I have been using a CPAP for over 15 years. The cost is covered by most medical insurance - or in my case, my VA Disability medical benefits.
Hey so that 11in1 (or whatever the number was) with the hexes, I think the hex cutouts are for the disassembly of paint guns for cleaning after use. The tool I have that like has the right size to loosen the nozzle and other parts on the paint sprayer. Pretty handy so I don't have to go hunt for wrenches.
The 8 in 1 or whatever they call it has those wrench cut outs for paint sprayer hoses. If you work with an airless sprayer, they're pretty handy. For everyone else, stick with the regular 5 in 1. The new ones at harbor freight are like 5 bucks.
I was about to type the same thing it’s probably only good for your paint sprayer
Your tip at the 5:16 mark reminds me of another trick I used. I have a bigger magnetic tray and I spilled some nails (I think it was), and since I don't have a magnetic sweeper, what did I do? I slapped the magnetic tray to the underside of my hand truck and used that as a quick-and-dirty magnetic sweep. Worked like a charm.
Saw you have a homemade 3/4“ stop block that you use with the fence clamps. If you're still skeptical of 123 Blocks: adding 1" to your cut is easier math than adding 3/4“, and the clamp holes are already there!
Brilliant!!!
Hey Brad, the 3M 60921 is the cartridge with organic vapors and the P100 particulate filter both in one 🙂
Ahhh, good to know. Link for those interested amzn.to/3F2sBhA
@@Fixthisbuildthat Fit is everything in respiratory protection. Technically, your beard negates the half face respirator from passing a fit test. You will still be exposed to fine particulate and vapor without a proper fitting mask. If facial hair is unavoidable, consider investing is a PAPR (Powered Air Purifying Respirator) system. You can get the same filter styles to fit these systems, the head tops can be used with facial hair, and they add a nice cool breeze while you work. 3M TR-600 is the way to go.
The way you use the half face respirator is for sure better than nothing. Just figured you should know about the correct solution for your hazard exposure. I too am too vain to shave my beard, and the PAPR has been my saving grace.
The best purchase I ever made for my shop is a pair of bifocal safety glasses. I struggled with over-sized goggle-types to wear over my eyeglasses (which often meant that I just skipped wearing the safety glasses at all...) - and then I found the bifocal version about 15 years ago at the Woodcraft store in Boise. Those safety glasses are now the very first thing I put one when I go into my shop!
Wow. I didn't even know that was a thing! I don't need to wear corrective lenses, but sometimes the magnification would be really handy.
that's good to know, great tip Jim, now I know what to put on my CHristmist list
I wear prescription eyeglasses with polycarbonate lenses. In addition to being lighter, the PC lenses are VERY impact resistant - but they are NOT ANSI rated. For that reason I also wear ANSI rated goggles over them, and/or my Trend Airshield Pro (which also protects my asthmatic lungs.) Years ago I used to have conventional safety glasses, but my prescription made them both heavy and expensive. (Fortunately, they were paid for by employers in my pre-retirement careers.)
@@GraemePayne1967Marine FYI, you can get ANSI Z87.1 prescription safety glasses for ~$35 at Zenni Optical!
Have you ever considered a face shield? I find myself always reaching for mine when I finally bought one.
I’ve had that knife for a couple of years now and I love it! I use it all the time.
Thanks!
Appreciate the Super Thanks!
5 and 6 in 1 paint tools are a life saver when working over night maintenance in retail
For anyone interested in those magnetic parts trays, shop around online and you will find a variety of sizes and shapes to go with whatever projects you do the most. There are small rectangular ones the size of that tray of screws you dropped on the floor. I find it useful to pre-load those small trays with common fasteners so they are within arms reach, and you can even turn them on their side and have them stuck to a magnetic backsplash over your work area. Doesn't take up as much space as a bunch of plastic trays and there is no risk of knocking them off the bench (and even if you did the fasteners would stay in the tray).
I keep my two on the side of my drill press next to my bench. Use them often. Like that paper towel idea.
Great Video. My favorite part of those 3m masks is when you are wearing glasses the air goes out the port on the nose, so your glasses don’t fog over. Complete game changer.
Oh yeah, that's an excellent feature
Love that box cutter/scraper!! It’s larger in size, so for me with arthritis in my hands, it will be easier to use. And I could actually use the scraper part.
Yeah, it's got a nice size to it 👍
As a bonus feature, the opposite end of the cutter/scraper can be used to open paint cans.
It uses proprietary blades though that are hard to find.
Yes having to buy their blades sucks. They are expensive and wear quickly when scraping. It was a big letdown because the knife is awesome.
The Kreg panel carrier is worth the money. I bought one a few months ago. Not only has it saved my back, but it makes bringing sheets in and out of my shed easy. It even helps when putting sheets on saw horses.
I have several of those magnetic parts trays, but never thought about that trick with the paper towel. That's brilliant!
I have one of the sheet carriers that is more basic, but was designed for drywall. Would work for plywood too.
Great video man. I'm about to buy ALL of these.
I love the way the hook and loop sanding pads help you use the most expensive sanding pads all the time, instead of economizing on cheap sheets.
NO, YOU ARE!!! : I agree BUT: One must pay for convenience.
@@macforme yes but it's really just as easy and effective to simply use sheet paper on a block.
@@itsROMPERS... I know .....but, I just wanted to write your out like that....
@@macforme sorry?
@@itsROMPERS... don't be sorry... It's me...not you. I have fun with everything even with people's handles.
The magnetic parts trays work fantastic for pins too. I have been using one next to my sewing machine for years now.
The wrench on that 2nd tool is for removing the tip on a spray gun. It's actually pretty handy
Tool Time!!! Tool Time! Outstanding tool review! New tools to make your work better, faster and more satisfying. Thanks!
The force was strong with this one! Great vid!
Good, it was
I really liked the utility knife/scraper. I agree about the 6 in 1 painter's putty knife. I use mine all the time.
There's a paint can opener on the end of the Tough Built Scraper and it has a lanyard hole. I own one and it's awesome.
The panel carrier looks to be a lifesaver; never heard of or seen such, thanks 4 sharing!
Regrading the 3M filter mask, I recently realized there are different models with different sizes. Since switching to the right size (M->L) it seals better, and is much more comfortable. And I use it much more.
Thanks I have had a glubot for over a year now and never knew about the cap being storage for the tip cap. that was the only thing a hated about the glubot was the tip cap always hanging in the way. Great job.
The 6 in 1 painter's tool, to me, is a must have tool for every shop. Never knew what the curved part was for. As for the magnet tray, I keep a couple of the Mag Switches floating around the shop. The advantage they have over the magnetic tray is they have an off/on switch. So, pick up the screws, bring them over the container, turn the mag switch off and they fall into the container. I also use them when fishing for a screw or nut that has fallen into the saw dust/shavings piles. Big piles from the wood lathes....
Also, I love the router/sanding matts for the shop. Get mine from Woodcraft, but sure there are others. They provide padding for your fine pieces of wood, and also fairly non slip. I have them in the drawer where I keep my bench chisels. They are also great for under your sharpening stones, both for the kitchen and the shop, and under the cutting boards in your kitchen.
Curved part helps clean paint off of your roller. Give it a try!
2:20 it’s a painters tool…. The hex wrench is for changing your nozzles on your sprayer
Ahhhhhhh, totally missed that use. Duh!
The 5 in one is the best! I sharpened every edge of mine so it’s now a 5 in 1 painters knife!!
So as a painter, the ass end of the tool I use to fix wall after i take a nail or screw out a wall before i fill hole. My foot is the " hammer" you speak of. The scraping fat end can also take out outlet screws.
Great tips! I bought the glue dispenser and painter's triangles before the video was even over. I stain 2 sides of wood a lot and the triangles are a better way than how I've been doing it.
I bought the Kreg plywood/drywall carrier about a month ago and wish I would have had something like this decades ago. I carried 22 sheets of 1/2" drywall out of a trailer and up flights of stairs onto my second floor, by myself, in about a half hour. Without the Kreg tool I would never have been able to get them upstairs alone.
I have that exact magnet bowl. I use mine a LOT.
Whats that? Ive had one of those for a long time and I love it. Using it today to carry sheet rock and plywood.
Dude, what a great video! My Christmas wish list just got bigger (the wife especially liked the last one, since she's the master stainer of the family). Thanks again!
I think you have those reversed.. 2097 folters are absolutely rated for organic vapors. They were a mainstay in the injection molding shop I worked in for a decade.
For glue I also really like FIFO bottles with silicone dispenser nibs, they’re usually 6 for 10$ and they have so many household uses for thick liquids.
My Dad was a Night Custodian at one of the local High Schools back in the 90's. He kept a 5-1 Painters Knife in a holster on his hip. I have it now and use it regularly at work too. Someday it will go to my Son.
This is D.&T. TOXIC RC, IVE BEEN BUILDING SINCE 9 YRS OLD LICENCED AND CANT SAY HOW LONG LOL, VERY NICE TO HAVE HEADS UP FOR THINGS THAT CAN BE PRACTICAL AND EFFICIENT, THANKS
Always fun times in the FTBT shop. Great video 🎉
Glad you enjoyed it!
Gotta try out the Purdy folding scraper, great and easy to fit in any pocket.
Great video! Watched a similar video not to long ago but with tools under $50, would be interessting to see what your recommendations in different price ranges are.
Yeah, we're thinking of that for a future one 👍
at the 6:14 mark of this video you are putting the full sheet of plywood on some kind of cart. Can you tell me what cart that is. I think I can use that to move some 4x4 panels for a platform I have. Thank you very much.
Safety glasses are a must! I used to be a machinist, now i was wearing saftey glasses but a metal sliver somehow got under there and into my eye. I woke up that same night around 2am and felt like i had flash burn. By 8am that morning my eye swelled shut and felt like it was on fire. Everytime i moved my eyes the sliver was cutting the inside of my eyelid. Eye doc just used a magnetic needle to extract it. But took about a week to heal and any sort of light would immediately make me tear up. I was rocking sunglasses indoors and an eyepatch that whole week. Its was painful to even watch tv.
Really useful video. One thing about the respirators - for them to work properly the wearer needs to be clean shaven (I have a beard too, but I have had to shave it off to wear a respirator while working with hazardous materials). Facial hair disrupts the facepiece seal almost completely negating most of the utility of wearing the respirator with organic vapor cartridges and/or particulate cartridges. There is a reason why workers occupationally exposed to hazardous materials and required to wear respiratory protection based on air sampling are required to be clean shaven to ensure they pass what is called the fit test and also to ensure the best possible facepiece seal.
Bought the scrapper knife the next day after watching this. Will be amazing in the car business for 2023!
You need to check out the Purdy 10 in one folding paint scraper, another really nice folding tool is the Kobalt chisel with the folding handle I recently got a double sided folding pull saw from Temu and the handles fold together all three excellent ideas for a tool bag. I like the Craig marking tool you did in another video might be my next purchase. All these items are under 20$ as well.
I would not use the panel lifter for drywall. The pressure exerted on such a small area will snap the drywall. Ask me how I know.
The 15 in 1 putty knife has the hex wrenches for breaking down a spray gun. One size fits the tip and the other where the paint cup attaches. Useful if you are someone who sprays allot and don't want to carry the extra tools.
Great comment thanks!
Great Video! Thank you for sharing your plans. Great ideas!
I have a few of these. Nice list. The panel carrier is on my New Tool list...That never ends...
Can you use the panel carrier for sheet metal too?
Hello, What thickness of plywood are made the anging cabinets behind You
?
Top-notch episode! I found myself taking notes, there was so much good material here! Well done!
Clean the toughbilt scraper after each use. I didn't and mine eventually gummed up and would not pivot anymore. I did buy another though i love it
05:55 You can also use a glue clamp for this. Most handymen already own such a thing.
What are you referring to as a glue clamp.
Thanks.
I've been needing some of those things. Thanks for the links.
The gluebot also has a babybot version. Super handy for small projects.
I use the Babybot for building model airplanes, it works great.
Harbor freight sells a rolling floor magnet that's really nice for picking up screws u drop or anything metal
Another idea for the magnetic tray…put the plastic container of wood screws in the tray so that if it does fall off the bench it stays in place
Clever
Safety dude here. For the respirator, make sure to shave and get a good seal. Like another commenter said, keep the cartridges in a bag. I really like 3M respirators because they have a design that routes air awayu from your glasses. On the goggle, the enclosed style will also keep chemical splashes out of your eyes. On the ear protection, ear plugs are cheaper and more effective, but you need to get a proper fit. It should sound like you are underwater or holding a shell against your ears. See if you can get a sample pack from the company.
Nice list. Wish the blade on utility knife did a 180. I have a magnet in a baggie but the tip with paper towel and parts bowl is a good one.
The enclosed safety goggles are also great if you wear glasses, the DeWalt ones (look like the pair you had there) and some other brands have enough clearance to wear normal glasses underneath comfortably
I made shocked Pikachu face when I saw that Kreg Panel Carrier.
That was amazing. I need that.
5:46 I am just bought a same tool( not same brand) I would like to say , it is absolutely worth each cent you spend on it.
That scraper thingy works great. Right up until you drop it.
Would love to see a video comparing tools from a beginners standpoint, sort of a guide for what power tools are best to buy first for various types of work if you don’t have any big tools to start like if you want to make furniture get this if you want to make small things get this if you plan to work with a lot of plywood or if you plan to work more in 2x4s get this
Project Farm youtube channel is great for knowing what tools are worth the money
@@bryce8174 thanks for the recommendation
Basically, any tool will do the job! None of these tools are necessary. Just use your head, and you will accomplish anything!
6:08 - that is REALLY useful! I often can't quite reach the edges of the board, so I have to either use my might of Thor to lift the board like this with my bare hands, or do the lever-lift from one end. And plywood boards are heavy!
I have the 1st razor knife/ scraper. It is good for glass.
However for me, it is not good for scraping/ removing caulk as the handle is too thick and hits the tile keeping the blade at too much of an angle.
2:59 I bought one and as long as its topped off its great. 1/2 full it sucks.
If you liked the Pentel graphgear 1000 the rOtring 800 retractable mechanical pencil is on another level! It's the best feeling pencil with a nice solid metal weight to it. It's also great for fidgeting with the coolest opening mechanism ever thanks to German engineering.
Absolutely love that painters tool
While I generally like Kreg tools & have a number of them, I don’t like their prices on some items. Instead of paying for the Project Blocks & Painter Pyramids, I just purchased a bag of 12 hockey pucks, rounded of some 1/4-20 bolts to points for $19.99 on Amazon. $1.67/each plus the price of the bolt.
But did you try to use the scraper? Does it do a good job?
on the
15 in one the side wrench slots are for paint guns for the tips and should be the same as your air fittings
Nice presentation. Your video not only fed my curiosity but was also entertaining, pity these useful items were not available a few year back; it must be nice to use.
Great tools! Thanks brother! Have a great weekend. Cool shirt btw!
thanks!
Cool tools and channel. I wish we had a few of these in South Africa 🇿🇦
👍👍
What would be the equivalent of a Painters Pyramid tool for round stock such as PIPE and/or DOWEL ?
The Husky 5-1 painters tool is my go to glad to see it in your video:)
Thanks for sharing. Not enough solid Losi Mini B builds upgrades etc. on UA-cam as of yet.
FWIW, Harbor Freight has a HUUUUGE set of different mag parts trays, different sizes, shapes, colors, all at pretty good prices. And this is the kind of thing that really can't be done wrong, so, yeah, HF is one of the better ways to go with these.
Regarding face protection, even better is
Amazon: UVEX by Honeywell Bionic Face Shield with Clear Polycarbonate Visor (S8500)
Just a hair over US$21 as I write.
They allow people who wear reading/closeup glasses to use them comfortably. This also flips up out of the way if you need it, and is usually far enough away from your exhalation that it does not fog up overmuch.
P.S. another thing of some relevance is bifocal safety glasses, which provide some assistance with seeing limitations for those of us with less than perfect eyesight.
Not sure about wearing with any kind of respiration mask, however. There seems to be a limitation there, in that there are not many things that allow both or provide both...
Also, there are times when Harbor Freight offers those magnetic trays for FREE with any purchase. That's how I got mine.
if you have a 3d printer and some velcro you can do the same thing with the sandpaper discs
Okay the glue booger thing got me. Nice job.
😂 😂 👍
The magnetic tray has a better use if you need a place to hold nuts, bolts, screws etc. But have no flat surface like working inside a duct or metal area, you can just stick it to the side of the metal and hold nuts and bolts while you work
Had one of those glue bottles ,,found the shaft hardened after first use,,, how did you stop that ….thanks
Keeping the cap on and the lid sealed tightly has worked for me
I like your videos informative, and funny God bless you and yours thanks .
Interesting but where do you get them? I can't find links to them just to other videos etc.
5:20 Try this. Turn your magnetic bowl over and set you plastic tray on top so the magnet pulls whatever is inside locking down your container so it does not fall on the floor.
Paper towel trick with magnet made the video worth watching. For those interested in the switch utility blade please be aware it requires a specialty blade; you're regular utility blades will NOT work. Just be aware.
I wish I saw that magnet towel hack yesterday lol now I'll remember that for next time.
The panel carrier is so helpful. They are Exceptional for dragging about Horse "Stall Mats". I think it was Lee Valley or perhaps Duluth Trading Post that sold a Heavy Aluminum Version called a "Gorilla Grip". Though at about forty dollars, it was not cheap....it was money well spent.
Any tips for budget respirator options for someone with a medium beard?
Bit.ly/3m6500 👍
I think the hex cutouts on the 5n1 tools are for paint-gun nozzles.
Around the 10 minute mark, you're discussing the breathing protection. What's your opinion on the effect of your beard on the effectiveness of the mask? I stopped growing my yearly winter beard when COVID hit because of the problems with a beard over an N95 mask, and when I'm in the shop, I use a dust protector that has a mouthpiece (like in a snorkel) that connects to a pipe that hangs over my back to two hepa filters, called a Resp-O-Rator. It's the only mask that I know of (other than the very expensive full face forced air systems) that can be effectively used with beards.
Love these videos! So much useful information
You're welcome!
This might make it under your $20 limit (depending on the exchange rate), but it is always in my pocket. My father had a brass one, but Lee Valley came out with a steel one.
Lee valley marking multi tool
Hi South Texas here! Thank you so much for making awesome content for us! I really enjoy your videos. Honestly, I would watch you over any streaming service. Great job!!
Also, I appreciate you explaining the respirator and eye protection. I haven't used my mask yet but I have the pink filters. I didn't know about the other filters.
as for the self centering nozzle, it will work on smaller size materials also, just twist