I’m sure Freewing will come out with something better at some point, but this is Freewing’s finest work. It’s a blast to fly, but it’s so darn pretty with all the attention to detail, it’s the only plane that has its own stand in the den.
Jeff, I would love to ask you some questions about your planes. I have only flown parkzone and eflite but would love to venture out to freewing or fms but worried….are you on ig?
@@Hughejazshole I started out with Eflite and Dynam. I got a few of the ArrowsRC as well, but the ultimate goal was to get good enough to fly Freewing and Flightline. (Flightline P-38 was at the top of the list) I didn’t discover FMS until a year ago. Started with their Yak 130. For the price, the easiness to fly, and the best gear in the market for a 70mm, it was a no-brainer. And from there everything I bought from FMS was even better. There was a day last Fall, one 6s battery left. On the table- FMS Bae Hawk, 1500mm a-10, Futura v3, and Eflite’s 90mm Viper. That was a great day- there wasn’t a wrong or a bad choice. (I went with the Futura. LOL!)
I bought my Raptor in February 2019. I have soooo many Freewing jets, but this is my favorite, so far. I waited a while to put it togother, because I didn't have the space in my hanger. I now have 26 flights on this bird. I wanted to chime in here because, this is actually a very good starter EDF. I saw a buddy out at the field ith the F-86, as his first EDF. that was my first EDF, and I understand the attraction to that plane. However, if you want the BEST starter EDF, this is the one. To quote Mahammad Ali, it "floats like a butterfly, and stings like a bee"!. Hands down, the easiest flying Freewing jet that I have ever owned. Go For It!!!
@@Haveablessedday820 If you are new, then a turbine engine would not be where you start. You can certainly put one in, but would need to do a lot of work to make it possible. Doesn't come with any camera and not sure what you mean by switch controller. This model is PNP so you provide/use your own Receiver and Transmitter for the protocol you fly with
You did not mention the use of Loctite. I go through my model and remove every single screw and set screw and Loctite it. I had a fan come loose on my F-16 because it was not locked I did at the factory. It was a dead stick landing. It destroyed the fan. Blades almost came through the foam. While locked are you doing all the set screws in the landing gear, I found the electric motor mount screws on the retract it self had come loose. I removed all of the retracts to do these screws as well.
A Little more Info and Showing what the Dual Rates on the Aileron , Elevator , Rudder & Flaps position 1+2 +3 Look Like and How to Adjust Them would have a GREAT HELP !!
Sorry about that. But I set her up as per the manual and haven't touched those setting since. I fly on low rate aileron by the book and only ever go to mid rate. And then I go full out with the elevator rates to get the great high alpha action when I want it. She really is a big trainer in that, she'd be hard to truly set up wrong. She wants to float
Thank You for the info . I have not flown my F22 yet . I am a little nervous about the maiden . So I have been looking for all the info that is on UA-cam . Love your Video , Keep up the great work . THX BEN V.
I have the latest Ultra Performance version. The AR8020T receiver binds fine, but the ESC keeps beeping and no controls are working. Can someone tell me the channel assignment? This version has a wire labelled as “Reverse Break”. I plugged that into channel 7. Am I doing something wrong? The manual is pretty much useless in this regard. Thanks!
Me: Gets this kit delivered. Immediately replaces all the screws that came with the kit with HEX head screws and grub screws for the collet's on the Stab rods. I'm not a fan of Phillips screw drivers around Foam.
@@el_diablito At 12:48 in this video we refer to the manual which shows you which holes on both the servo and control linkage the pushrods should attach to. Elevator is the second hole on the servo side and the 1st hole on the control surface side.
6 Channels is all you need for this bird but I am not sure which radio you are referring too, and a 2100mAh lipo will not be enough. Recommend a 5000mAH 6s or larger for this.
completely up to you. This is a PNP (Plug and Play) model so it comes with everything except a receiver and battery. You atleast need a 6 channel receiver (throttle, aileron, elevator, rudder, flaps, landing gear)
Looks like very similar to what Hobbyking sells, they have them in a couple different sizes, really like the one I have. *if* they even still sell them.
I believe this jet to be a great 2nd jet, and the only reason I cant say first jet is most don't go for this size/price for a first jet when options like the Avanti exist.
Very well built you put Dynam & LX to shame, most of my fleet are Eflight, I only have 1 complaint/question where can I get ordinance for this and the V2 F-35? Great video James you can message me on Instagram (rcintheworks) thank's 😉👍🛩
By nature, the F-35 and F-22 maintain stealth with their ordinance tucked away, so none were made for either of these (while knowing some variations do have loadouts). But many have modeled some. You can buy the railing systems from us and ordnance from other jets and modify it yourself. But ordnance on any EDF jet will only add more drag
@@MotionRC I knew that duh lol steatlh Bombers are tucked away and I see the details in them so my badd James, I like the edf's with ordinance for looking at I do remove them when I fly 😉👍
@@timvanasen6711 If you have access to a 3d printer, we have free files on our support page that mimic the bay's being open with missiles attached. Check out the files loaded on November 6, 2018: www.motionrc.com/pages/freewing-f-22-raptor-90mm-support-page
I’m sure Freewing will come out with something better at some point, but this is Freewing’s finest work. It’s a blast to fly, but it’s so darn pretty with all the attention to detail, it’s the only plane that has its own stand in the den.
Jeff, I would love to ask you some questions about your planes. I have only flown parkzone and eflite but would love to venture out to freewing or fms but worried….are you on ig?
@@Hughejazshole I started out with Eflite and Dynam. I got a few of the ArrowsRC as well, but the ultimate goal was to get good enough to fly Freewing and Flightline. (Flightline P-38 was at the top of the list)
I didn’t discover FMS until a year ago. Started with their Yak 130. For the price, the easiness to fly, and the best gear in the market for a 70mm, it was a no-brainer. And from there everything I bought from FMS was even better. There was a day last Fall, one 6s battery left. On the table- FMS Bae Hawk, 1500mm a-10, Futura v3, and Eflite’s 90mm Viper. That was a great day- there wasn’t a wrong or a bad choice. (I went with the Futura. LOL!)
Good Job James on showing Contents and Build..!!! Hope to see at the airfield soon !!
I bought my Raptor in February 2019. I have soooo many Freewing jets, but this is my favorite, so far. I waited a while to put it togother, because I didn't have the space in my hanger. I now have 26 flights on this bird. I wanted to chime in here because, this is actually a very good starter EDF. I saw a buddy out at the field ith the F-86, as his first EDF. that was my first EDF, and I understand the attraction to that plane. However, if you want the BEST starter EDF, this is the one. To quote Mahammad Ali, it "floats like a butterfly, and stings like a bee"!. Hands down, the easiest flying Freewing jet that I have ever owned. Go For It!!!
Awesome! You are 100% right
One of my favorite planes is the f22. I can not wait to get one of these.
Both fly well, this 90mm one or the smaller 64mm
@@MotionRC can you put a turbine engine on it and does it come with a camera also can you switch controller? I’m new and want to get one like this
@@Haveablessedday820 If you are new, then a turbine engine would not be where you start. You can certainly put one in, but would need to do a lot of work to make it possible. Doesn't come with any camera and not sure what you mean by switch controller. This model is PNP so you provide/use your own Receiver and Transmitter for the protocol you fly with
She is a beauty! Salivating!
GREAT tutorial video!
I'm going to love doing this. I can't wait for my jet to arrive!!
From where, you order it
Thank you motion rc and freewing! I'm excited to get mine!
Raptor baby
I will be getting this one it will look real nice with my 6 other free wing plane they just build the best jet on the market 😁👍👍👍👍👍
thanks Andy!
Yes
Fantastic video. Brilliant job guys.
When are these in the UK?. I can't find one over here as yet. The 😪
Dang it looks impressive 👍🏽
very nice best plane ever built
good
Hey Dynam Manufacturer are you watching?? I would be if i were you.....
Love it! It's the one that had to be next!
I also love f-22 raptors
Ordered one last night!
Nice too see you again james, its good you are now at motionrc and also stuart :) loss for hk
Thanks man! Happy to be here.
Wow build vid already
You did not mention the use of Loctite. I go through my model and remove every single screw and set screw and Loctite it. I had a fan come loose on my F-16 because it was not locked I did at the factory. It was a dead stick landing. It destroyed the fan. Blades almost came through the foam. While locked are you doing all the set screws in the landing gear, I found the electric motor mount screws on the retract it self had come loose. I removed all of the retracts to do these screws as well.
A Little more Info and Showing what the Dual Rates on the Aileron , Elevator , Rudder & Flaps position 1+2 +3 Look Like and How to Adjust Them would have a GREAT HELP !!
Sorry about that. But I set her up as per the manual and haven't touched those setting since. I fly on low rate aileron by the book and only ever go to mid rate. And then I go full out with the elevator rates to get the great high alpha action when I want it. She really is a big trainer in that, she'd be hard to truly set up wrong. She wants to float
Thank You for the info . I have not flown my F22 yet . I am a little nervous about the maiden . So I have been looking for all the info that is on UA-cam . Love your Video , Keep up the great work . THX BEN V.
Any advice on mounting the engine and running wires???
On the build, at 9:56 did you exclude one of the 3 small screws to the horizontal stabilizer?
رائعة جدا
I have the latest Ultra Performance version. The AR8020T receiver binds fine, but the ESC keeps beeping and no controls are working. Can someone tell me the channel assignment? This version has a wire labelled as “Reverse Break”. I plugged that into channel 7. Am I doing something wrong? The manual is pretty much useless in this regard. Thanks!
Can the horizontal stabs be used for roll input also? would be awesome to allow independent movement for ridiculous roll.
With the right transmitter mix, anything is possible
Would love it if it had doors for the main landing gear and doors to show the ordnance
absolutely gorgeous and outta my price range... :|
I'm OK with my cheap P-51... :)
Try the 64mm F-22. She's a blast!
@@MotionRC haven't done an EDF yet but that would be one of my first choices... gotta get a little better at it though lol !... :D
@@MotionRC I'd love to buy ALL the 64mm, I think they are gorgeous !... :P
hi Motion RC ! Why you'd like to using Frsky X9D ?/
Trying to set this up with DX6 can some please help me with wingtype & tailtype? thanks :)
16:23
Anyone have a good place to start for expo on low and high rates?
it is cool 😊 but why don`t you made it of carbon fiber and put two mini turbine ,each delivers 7 kg of thrust.
What’s the difference between the 6s and 8s?
The power system is different to handle more cells. The 8s will have more speed but will require more batteries
where do i buy the missle door printed set?
Me: Gets this kit delivered. Immediately replaces all the screws that came with the kit with HEX head screws and grub screws for the collet's on the Stab rods.
I'm not a fan of Phillips screw drivers around Foam.
👍👍👍
I'm going crazy trying to adjust my elevator. I'm running a Futaba transmitter and receiver
what kind of adjustment?Not sure how to help with limited info
@@MotionRC Elevator, any pics of where the pushrod position on the white piece on servo
@@el_diablito At 12:48 in this video we refer to the manual which shows you which holes on both the servo and control linkage the pushrods should attach to. Elevator is the second hole on the servo side and the 1st hole on the control surface side.
Are these still available?
How about engine could they can provide only provide engine for other projects
The motor and entire power system are sold as spare parts yes.
What happened with the wrinkling at 9:45 underneath the vertical stab
Man, those vertical stab servos should really have gray covers at this price point... Great job on this otherwise. Such a floater
Tony Accurso (XPlaneGuy) shared his Home Depot color numbers on Hobby Squawk
I agree
2D thrust vectoring possible for DIY rc plane?
Спасибо 🙏 за русские субтитры
Will they be restocking them. Sold out already.
This is a super popular product which gets restocked consistently. It will be back soon
f-22 is where buy
Motionrc.com
Which material to body made this plane
This plane body is EPO foam with wood, carbon, plastic reinforcement throughout
Thank you sir
Please sir make video to how to made this plane body.....
@@p.c2007 these are made in mass in a factory with 100s of materials ua-cam.com/video/Z5B4DnbxJ2k/v-deo.html
Why wood use in plane body
I have a spectrum dx8. What is radio setup for edf?
How many channel receiver ?
What is the airfoil used there ?
Qae velocidad alcanza? Y cuánto dura la batería
Bro please make a video on halicopter model bro
Maximum flight time? And its range of control ❤️plz
This plane irs hard plastic or foam
This is mostly EPO Foam with plastic, carbon, wood within. No RC models are fully plastic due to weight.
What materials are used to made this jet. Do you people delivered in India?
what is the plane made of?
How fast it is?
I need your expert opinion. Will the 86 dollar 6 channel radio give me plenty of flying range?? I have to buy two 2100 batteries. And a charger.
6 Channels is all you need for this bird but I am not sure which radio you are referring too, and a 2100mAh lipo will not be enough. Recommend a 5000mAH 6s or larger for this.
Sir show its engine machnism
Click on the product link in the description and you can get all the information on the ESC/Motor and Fan Unit
How much for one sir ?
What transmitter should i use? Does it even come with a transmitter? Spektrum, flysky?
completely up to you. This is a PNP (Plug and Play) model so it comes with everything except a receiver and battery. You atleast need a 6 channel receiver (throttle, aileron, elevator, rudder, flaps, landing gear)
Motion RC. Ok, thanks. Any recommendations? For a transmitter to buy. I am looking for a good range but not too expensive
Very nice job showing the F-22 build. What stand is this the jet sits on, really like it?
I got that at a swap meet years ago. Not sure where from, no name on it
Looks like very similar to what Hobbyking sells, they have them in a couple different sizes, really like the one I have. *if* they even still sell them.
@@endeavourco Thanks for the reply. I found it by photo search and got one.
Is this a good first time intermediate jet or like a second mid tier?
I believe this jet to be a great 2nd jet, and the only reason I cant say first jet is most don't go for this size/price for a first jet when options like the Avanti exist.
My friend gave me his crashed F22. I have to replace the fuselage. Can you tell me what come with the replacement fuselage? Motors?
Only the fuselage. Not any electronics
@@MotionRC what about wiring.
I want 2channel transmitter and receiver
Hi motion RC.. How to order f22 edf 12blade??
Could you provide a link where we could buy only engine of this type
Spare parts for this Jet are here: www.motionrc.com/products/freewing-f-22-raptor-90mm-edf-jet-pnp#spare-parts-tab
What’s the name of the stand?
How to make F22 plane sir
What is the price of this F22 Raptor ?
How much does a RC f 22 raptor cost?
Whats the material is it plastic or Styrofoam?
It’s EPO (Expandable Polyolefin). There are plastic parts on this jet, though, such as the canopy, servo casings, etc.
Is thread lock needed at 9:27?
I guess it couldn't hurt. But this was built as is and flown over 20 times consecutively for the flight review and trailer videos
I can buy it but i cant understand and my area is small sooo :/ it would be a waste
Very well built you put Dynam & LX to shame, most of my fleet are Eflight, I only have 1 complaint/question where can I get ordinance for this and the V2 F-35? Great video James you can message me on Instagram (rcintheworks) thank's 😉👍🛩
By nature, the F-35 and F-22 maintain stealth with their ordinance tucked away, so none were made for either of these (while knowing some variations do have loadouts). But many have modeled some. You can buy the railing systems from us and ordnance from other jets and modify it yourself. But ordnance on any EDF jet will only add more drag
@@MotionRC I knew that duh lol steatlh Bombers are tucked away and I see the details in them so my badd James, I like the edf's with ordinance for looking at I do remove them when I fly 😉👍
@@timvanasen6711 If you have access to a 3d printer, we have free files on our support page that mimic the bay's being open with missiles attached. Check out the files loaded on November 6, 2018: www.motionrc.com/pages/freewing-f-22-raptor-90mm-support-page
Only the United States has that
Are you using 7 channels?
only 6 needed for this. Throttle, Aileron, Elevator, Rudder, Flaps and Landing Gear
@@MotionRC admiral rx and spektrum tx?
How much flight time with that 5000mah
3min safe 4min getting low.
One day you're flying it and accidentally crash it really badly… What would you do?
hot glue the shit out of it
Crankestein Loskon. Lmao, that’s what i would do. I ain’t spending another half grand
But there is no f 22 raptor to buy in sri lanka
2:48
Where do you buy it?
Team Nhà Trần. Online. Just look up freewing f22 raptor rc
Dear santa.....
I just can not spend $ 500.00 for a plane with no nav. wing lights !!!
Then mount themselves
17:21
I bought a cheap Chinese f22. It was59 dollars. I only got 20 flights from it.
the intro was 100% bb but sure
Someone from customer service needs needs to contact me! 10 messages since Fathers Day to no avail!
You started a ticket? Called in? Or just leaving UA-cam Messages? Our CS team isn't on the youtube channel
How can I get a free one? Ill take it to my company vacay days for employees
Haha.
We dont mind you can take it on vacation and let your employees fly it for free, but its still gonna be £500
and the vector thrust???? where is my vector thrust???
No way. It already does all the maneuvers you need. That would be unnecessary weight
@@mckaylundtuttle7962 yeah and more things to go wrong. Terribly wrong.
Where's the bird 🐦 and how do you know it's a she? 😂😂
17:19